Fixed an issue where analytic events did not show up in the Notification Panel for Hikvision DS-2CD3T56G2-4IS on firmware V5.5.150 build 200927.
Instant analytic events stopped showing up in the Notification Panel after the first time they were triggered. Fixed.
BUG FIXES:
Certain sections of the desktop client had incorrectly rendered UI text on Macs with the M1 SoC. Fixed.
An issue caused the Server to not start on Raspberry Pi 3. Fixed.
The lens position and zoom level of fisheye cameras were not saved in the layout. Fixed.
NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
Added advanced PTZ support for Hikvision IPC6412LR-X5P, IPC6854SR-X38UP-VC, IPC6222E-X33UP, IPC6222EI-X22UP-C.
Fixed an RTP error that occurred with H.265-encoded primary streams on DW cameras.
Server did not use ONVIF to configure stream settings for Arecont Vision cameras from the Contera Panoramic series (AV08CPD-118, AV20CPD-118, AV8476DN, and AV20476DN) and DUO series (AV4856DN, AV10856DN, and AV16856DN). Fixed.
++++++ 4.2 RELEASE NOTES ++++++
OPERATING SYSTEMS/PLATFORMS
Windows 7 compatibility support ended.
Windows 2008 R2 compatibility support ended.
Added support for MacOS 11 in the desktop client.
IMPROVEMENTS:
Added Catalan language.
The maximum value for pre-recording and post-recording actions in camera recording events is now 600 seconds.
Export dialog now uses short date and time format by default.
Update packages are now validated before installing to prevent malware injection.
Camera name and export time can now be overlayed onto the footage in the Export Dialog.
Camera name can now be overlayed when capturing a screenshot.
Exported videos in h.264 format can now be played back in Windows Media Player.
Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
The way that ROI data is overlaid on cameras was divided into two groups: “Show Region of Interest” and “Objects”. “Show Region of Interest” makes ROI objects visible on cameras without object tracking support if the “Display on Video” option is enabled in Camera Settings > Plugins. “Show objects” makes ROI objects and camera analytics objects visible only on cameras that support object tracking.
Removed the limitation on Video Wall licenses that prevented more than one active direct control session at a time.
ANALYTICS IMPROVEMENTS:
The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
Dahua analytics plugin:
Models:
All models with supported analytics.
Analytics Features:
Added short object tracking for objects in events. The track duration is about 500ms.
Fast-moving
Parking detection
Loitering,
People gathering
Abandoned object detection(Left object detection)
Intrusion detection
Missing object detection
Tripwire detection (Cross line detection)
Queue size detection
In-area people counting
People flow counting
“Motion+: Detect any motion event” was removed from the list for Bosch analytics.
NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
INFRACHEN ZH-FS160 now supports signal input events.
Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
Motion detection did not work for Axis M3007. Fixed.
VMS-20331:Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
Signal I/O support added for HIKVISION DS-2TD4237*.
The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
Added I/O license support for AXIS A9188.
Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
VIVOTEK FD9189, FD9380*, FD9388*, IT9389-HT,IB9391*, SD9362*, SD9366*, IB9387*, FD8369*,CC8370*, CC9381 failed to initialize correctly via ONVIF. Fixed.
Added support for Axis C1410 Network Mini Speaker.
Hikvision DS-2CD4A26FWD-IZHS8/P incorrectly showed support for Pan and Tilt, even though only Zoom is supported. Fixed.
FPS limitation for Axis Q1645 was increased to 120 fps.
ANALYTICS BUG FIXES:
VMS-20948:Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed “Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
Notification “Alarm detection has ended” for Dahua analytics cameras appeared only when the server stopped. Fixed.
Only the first 5 rules for Dahua analytics worked. Fixed.
Cropped thumbnails of analytics objects were shown in the Notification Panel if “Disable secondary stream” was enabled. Fixed.
Analytics events were not available for VIVOTEK cameras with firmware 2.2002.23.01. Fixed.
BUG FIXES:
In some cases, Cloud system tiles on the Welcome Screen would intermittently switch between an offline and online status. Fixed.
Live view in Web Admin did not work in Safari. Fixed.
CPU usage significantly increased on AWS EC2 instances with ELB enabled and TCP/UDP port 7001 configured as a listener. Fixed.
Unable to view live camera streams or archived video on the Cloud client due to an “Internal Server Error 500”. Fixed.
The “On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
PTZ tours would stop when activated on more than one camera at a time. Fixed.
Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports even if the camera does not support audio at all. Fixed.
The “Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
Failover did not work with cameras that were manually added to the System. Fixed.
Auto-Discovery could not detect some ONVIF cameras. Fixed.
Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
The “Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
Exported video duration was incorrect. Fixed.
PTZ tours were not displayed in the context menu. Fixed.
Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
Screenshots from multisensor cameras included the image from only one sensor. Fixed.
Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
The option “Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
The right side of the overlay in exported videos would get cut off. Fixed.
Storage credentials were not encrypted in the Server log. Fixed.
DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
Fixed an issue where some actions did not sync properly between Servers.
The “Camera IP conflict” event did not work when triggered. Fixed.
Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name “General”.
I/O module license failover did not work. Fixed.
Fixed an issue with the Chinese translation on the “Storage Management” and “Storage analysis” dialogs.
The Server tried to get storage space information about a DVD drive. Fixed.
Users without the appropriate permissions were able to access the Server Monitor. Fixed.
Sometimes the desktop client would crash when opening local files. Fixed.
Two systems with enabled secure connection could not be merged in web admin. Fixed.
Fixed several server and desktop client crashes.
API/SDK CHANGES/FIXES
Added an option for users to change bounding box colors for some analytics objects in compatible Plugins.
The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
Added new URL parameters for exporting over the /media method.
RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
A new web browser session identifier will be generated every time before the session is established.
SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.
Added new URL parameters to the /media method: stream, duration, and mkv.
HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
Hanwha analytics plugin improvements and fixes:
Added support for Box Temperature Detection for Hanwha thermal cameras.
Added a possibility to choose a face bounding box color for Mask tracking.
The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
Fixed a memory leak caused by malformed object tracking metadata from a Hanwha camera, which consumed all available RAM and froze the Server.
Analytics events for PND-A9081RV displayed a thumbnail of the entire camera view instead of best shot.Fixed.
Sometimes updated ROI settings did not apply when saved.Fixed.
Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.
Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch)).
KNOWN LIMITATIONS:
Due to a firmware issue affecting Bosch cameras, sometimes events are triggered but not shown in the desktop client.
Hardware decoding doesn’t work on PC-based Ubuntu systems.
Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
“Error 404. Cannot find the page. Check the URL and try again” shows up on the Web Page tab in Camera Settings for Hanwha NVRs. The web page will be correctly displayed after users click “OK”.
4.2.0.32659 Video Management System PUBLISHED 17 Mar 2021
Release Notes:
OPERATING SYSTEMS/PLATFORMS
Windows 7 compatibility support ended.
Windows 2008 R2 compatibility support ended.
Added support for MacOS 11 in the desktop client.
IMPROVEMENTS:
Added Catalan language.
The maximum value for pre-recording and post-recording actions in camera recording events is now 600 seconds.
Export dialog now uses short date and time format by default.
Update packages are now validated before installing to prevent malware injection.
Camera name and export time can now be overlayed onto the footage in the Export Dialog.
Camera name can now be overlayed when capturing a screenshot.
Exported videos in h.264 format can now be played back in Windows Media Player.
Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
The way that ROI data is overlaid on cameras was divided into two groups: “Show Region of Interest” and “Objects”. “Show Region of Interest” makes ROI objects visible on cameras without object tracking support if the “Display on Video” option is enabled in Camera Settings > Plugins. “Show objects” makes ROI objects and camera analytics objects visible only on cameras that support object tracking.
Removed the limitation on Video Wall licenses that prevented more than one active direct control session at a time.
ANALYTICS IMPROVEMENTS:
The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
Dahua analytics plugin:
Models:
All models with supported analytics.
Analytics Features:
Added short object tracking for objects in events. The track duration is about 500ms.
Fast-moving
Parking detection
Loitering,
People gathering
Abandoned object detection(Left object detection)
Intrusion detection
Missing object detection
Tripwire detection (Cross line detection)
Queue size detection
In-area people counting
People flow counting
“Motion+: Detect any motion event” was removed from the list for Bosch analytics.
NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
INFRACHEN ZH-FS160 now supports signal input events.
Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
Motion detection did not work for Axis M3007. Fixed.
VMS-20331:Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
Signal I/O support added for HIKVISION DS-2TD4237*.
The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
Added I/O license support for AXIS A9188.
Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
VIVOTEK FD9189, FD9380*, FD9388*, IT9389-HT,IB9391*, SD9362*, SD9366*, IB9387*, FD8369*,CC8370*, CC9381 failed to initialize correctly via ONVIF. Fixed.
Added support for Axis C1410 Network Mini Speaker.
Hikvision DS-2CD4A26FWD-IZHS8/P incorrectly showed support for Pan and Tilt, even though only Zoom is supported. Fixed.
FPS limitation for Axis Q1645 was increased to 120 fps.
ANALYTICS BUG FIXES:
VMS-20948:Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed “Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
Notification “Alarm detection has ended” for Dahua analytics cameras appeared only when the server stopped. Fixed.
Only the first 5 rules for Dahua analytics worked. Fixed.
Cropped thumbnails of analytics objects were shown in the Notification Panel if “Disable secondary stream” was enabled. Fixed.
Analytics events were not available for VIVOTEK cameras with firmware 2.2002.23.01. Fixed.
BUG FIXES:
In some cases, Cloud system tiles on the Welcome Screen would intermittently switch between an offline and online status. Fixed.
Live view in Web Admin did not work in Safari. Fixed.
CPU usage significantly increased on AWS EC2 instances with ELB enabled and TCP/UDP port 7001 configured as a listener. Fixed.
Unable to view live camera streams or archived video on the Cloud client due to an “Internal Server Error 500”. Fixed.
The “On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
PTZ tours would stop when activated on more than one camera at a time. Fixed.
Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports even if the camera does not support audio at all. Fixed.
The “Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
Failover did not work with cameras that were manually added to the System. Fixed.
Auto-Discovery could not detect some ONVIF cameras. Fixed.
Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
The “Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
Exported video duration was incorrect. Fixed.
PTZ tours were not displayed in the context menu. Fixed.
Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
Screenshots from multisensor cameras included the image from only one sensor. Fixed.
Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
The option “Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
The right side of the overlay in exported videos would get cut off. Fixed.
Storage credentials were not encrypted in the Server log. Fixed.
DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
Fixed an issue where some actions did not sync properly between Servers.
The “Camera IP conflict” event did not work when triggered. Fixed.
Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name “General”.
I/O module license failover did not work. Fixed.
Fixed an issue with the Chinese translation on the “Storage Management” and “Storage analysis” dialogs.
The Server tried to get storage space information about a DVD drive. Fixed.
Users without the appropriate permissions were able to access the Server Monitor. Fixed.
Sometimes the desktop client would crash when opening local files. Fixed.
Two systems with enabled secure connection could not be merged in web admin. Fixed.
Fixed several server and desktop client crashes.
API/SDK CHANGES/FIXES
Added an option for users to change bounding box colors for some analytics objects in compatible Plugins.
The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
Added new URL parameters for exporting over the /media method.
RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
A new web browser session identifier will be generated every time before the session is established.
SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.
Added new URL parameters to the /media method: stream, duration, and mkv.
HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
Hanwha analytics plugin improvements and fixes:
Added support for Box Temperature Detection for Hanwha thermal cameras.
Added a possibility to choose a face bounding box color for Mask tracking.
The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
Fixed a memory leak caused by malformed object tracking metadata from a Hanwha camera, which consumed all available RAM and froze the Server.
Analytics events for PND-A9081RV displayed a thumbnail of the entire camera view instead of best shot.Fixed.
Sometimes updated ROI settings did not apply when saved.Fixed.
Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.
Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch)).
KNOWN LIMITATIONS:
Due to a firmware issue affecting Bosch cameras, sometimes events are triggered but not shown in the desktop client.
Hardware decoding doesn’t work on PC-based Ubuntu systems.
Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
“Error 404. Cannot find the page. Check the URL and try again” shows up on the Web Page tab in Camera Settings for Hanwha NVRs. The web page will be correctly displayed after users click “OK”.
4.1.0.31948 Video Management System PUBLISHED 14 Oct 2020
Release Notes:
IMPORTANT
The below build is a Patch. It has not been fully tested and may contain certain issues.
NEW FEATURES
Redesigned PTZ controls – PTZ control have been redesigned for improved UX. To enable the new PTZ user interface go to Local Settings in the Desktop Client and uncheck the “Show aim overlay for PTZ cameras” checkbox.
Intel® Quick Sync Video – Intel® Quick Sync Video uses the dedicated media processing capabilities of Intel® Graphics Technology to decode and encode fast, enabling the processor to complete other tasks and improving system responsiveness. Vastly improves the ability of low power hardware (e.g. Intel Atom, Celeron) and the ability of the Desktop Client to decode very high resolution (e.g. 16 MP, 32MP) cameras and streams.
Go to Local Settings in the Desktop Client and check the “Use Hardware Video Decoding” checkbox to enable Intel Quick Sync Video.
“Use Hardware Video Decoding” is unchecked by default.
Fisheye lens projection options – Improve fisheye dewarping precision by selecting the most suitable lens projection type:
Equisolid
Equidistant
Stereographic.
ANALYTICS IMPROVEMENTS/FIXES
The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
Vivotek analytics plugin:
Models: See https://www.vivotek.com/learning/feature-article/24/smart-vca; as of this patch release, the available models consists of the following:
Fixed Dome Cameras: FD9165-HTx, FD9365-xHTVx, FD9391-EHTV, FD9187-Hx, FD9387-xHx,FD9189-Hx, FD9389-xHx, IT9389-Hx
Camera profile names did not show up correctly when configuring event rules for the AXIS Fence Guard plugin.
AXIS LPR analytics plugin events were not triggered. Fixed.
When an analytics plugin is enabled on a camera and its settings are saved, the changes/updated values are not reflected in the GUI after the plugin settings dialog is re-opened.
Detected objects had the wrong timestamps stored in the analytics DB.
NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
New Hikvision cameras supported: DS-2DE4425, DS-2DE4A320
New Axis Cameras supported: AXISP3715, AXISD201-S, AXISD101-S
New Arecont Vision Cameras supported: AV2756, AV12CPD
Fixed a streaming issue for HIKVISION DVR DS-9632NI-I8.
MP2L2 codec is now supported on Hikvision cameras.
Distorted audio on Hikvision DS-2CD4A26FWD-IZHS8/P when MPEG sampling rate was set to 44.1 kHz. Fixed.
Server failed to fetch the stream from Hikvision DVR DS-7216HUHI-K2. Fixed.
Only the first channel worked properly on Hikvision DS-7216HWI-SH/A after the discovery. Fixed.
The last two channels (15 & 16) of a Hikvision 16CH DVR (DS-7216HWI-SH/A) were showing an error. Fixed.
Hanwha XND-6080RV had the wrong stream settings while configuring via Onvif. Fixed.
Some camera models from Sony, Huawei, SMAX, Edimax, and A-MTK had configuration issues that caused the live stream to intermittently stop. Fixed.
The initialization time for some cameras has been improved.
Axis T8311 joystick would stop working after using 2Way audio on a PTZ camera. Fixed.
The incorrect stream resolution was displayed for the MIT Professional 2MP camera. Fixed.
Fixed an issue with 2-way audio for Uniview cameras.
Fixed an issue detecting the input signal for AMTK AH5583T.
IMPROVEMENTS
Only administrators can see servers in the Desktop Client “About” dialog.
Added the ability to playback audio from all devices on the scene in the Desktop Client.
The Server failed to retransmit video from certain UDP streams as RTSP streams. Fixed.
The Server could not store analytics data on some Ubuntu servers due to selecting partitions which it didn’t have write access to. If the Server does not have write access to a particular partition, it can no longer be selected to store analytics data.
”Allow only secure connections” (HTTPS traffic only) is turned on by default.
The limitations for pre- and post-recording are changed in Camera Settings: 90s for pre-recording and 300s for post-recording.
The in-client web browser now saves user credentials between browser sessions.
Added TLS support for LDAP on Linux-based systems.
Hotkeys changes:
[+] [−] keys are no longer used to zoom in or out on the Layout.
Shift + arrow keys are now used to select a camera on the Layout.
C2P cameras now require one analog encoder license per channel.
BUG FIXES
The FPS of a live stream would drop if a third-party software used the RTSP API to pull the stream from the Server. Fixed.
A fix for the error “Storage Issue: Analytics storage DB error. Insufficient permissions on the mount point” was made available. Enable the “forceAnalyticsDbStoragePermissons” advanced option from the WebAdmin interface to apply the fix.
The Desktop Client would crash if a microphone was disconnected during a 2-way audio session. Fixed.
There was no option to disable audio on a camera when “Allow System to optimize camera settings” was unchecked in System Administration. Fixed.
Fixed the GUI glitch that occurred when creating a new role in the User Roles dialog.
Adding a Virtual Camera and searching for a camera manually were not recorded in the Audit Trail. Fixed.
On Ubuntu, the scheduled backup didn’t start as expected if the VMS time was configured manually. Fixed.
Fixed an issue with WebAdmin and Cloud Portal availability for a system with 1000 cameras when accessed outside the network.
The overlay settings for Axis cameras in the “Advanced” tab didn’t work without reopening the camera. Fixed.
The Server returned an invalid thumbnail for the streams with B-frames. Fixed.
In some rare instances the Server would freeze. Fixed.
No motion was detected on multi-sensor panoramic cameras when “Force motion detection for stream” was enabled and set to Primary and “Disable secondary stream” was checked. Fixed.
“Restore from backup” was redesigned to be more straight-forward for Cloud-merged Systems.
The notification “Storage is not configured” disappeared when the Desktop Client was restarted. Fixed.
Server did not destroy the DeviceAgent on camera disconnect. Fixed.
Server improperly returned 500 for the correct ec2/analyticsLookupObjectTracks request. Fixed.
Under certain rare circumstances the client could not connect to the server after upgrading from 3.2 to 4.1. Fixed.
Fixed a file handle leak on Windows servers.
Failed to export a local file to MP4 format. Fixed.
The Motion tab for ArecontVision 12186DN panoramic camera did not display a video stream on ARM servers. Fixed.
Virtual cameras created using video recordings from Android devices have an inaccurate timeline due to differences in timestamp and file creation on Android. Fixed.
The number of licenses in use would not display properly with French regional settings enabled in the Desktop Client. Fixed.
Fixed an issue where some versions of the Desktop Client were unable to perform an in-client update to another 4.1 build.
Fixed an issue where the URL format did not work properly when the timestamp parameter was used to access virtual cameras. The Desktop Client would open and play the archive from the beginning instead of the specified timestamp.
The Desktop Client stability improved.
Sometimes exported video would stutter during playback. Fixed.
Sometimes the navigation menu on the WebAdmin page would appear twice. Fixed.
API/SDK CHANGES/FIXES
Metadata SDK:
Added a method for plugins to get the Server’s built-in SDK version.
Performing a text search for object type in the Desktop Client led to analytics metadata not working properly during playback. Fixed.
Metadata was received from Stub Analytics Plugin only after Server restart. Fixed.
When a plugin is enabled on a camera, and its settings are saved by pressing the “OK” button, settings values were not updated in GUI when the plugin setting dialog is being opened again. Fixed.
Stub Analytics Plugin: throwPluginDiagnosticEventsFromDeviceAgent setting was renamed to throwPluginDiagnosticEventsFromEngine.
Stub Analytics Plugin: Added the method serverSdkVersion() to IUtilityProvider. serverSdkVersion() passes information about the Server’s built-in SDK version to the plugin.
Stub Analytics Plugin: Analytics Events would sometimes not show a thumbnail in the Notifications Panel. Fixed.
API:
Fixed the API documentation for the getCamerasEx method. Removed the “cameraName” and “cameraId” fields.
/api/getEvents return codes updated.
The wrong parameter type was used for the logLevel field on the WebAdmin’s API testing tool page. Fixed.
Added preciseBounds parameter to /ec2/recordedTimePeriods. The time range bounds will match the start and end times of the requests.
RTSP Streaming parameters were missing from the Server API documentation. Fixed.
The licenseUsed value from ec2/getCamerasEx was innacurate for a recording camera on an active schedule. Fixed.
Fixed errors that occurred when running the public node.js examples.
HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
Hanwha Analytics Plugin improvements:
Best shot images in the right panel are now identical to the ones in the camera’s web interface.
Mask detection event added.
Added separate events for Object tracking type events (Face tracking, License Plate tracking, Person tracking, Vehicle tracking).
Description of the events is filled with the attributes’ names and their values.
Added a possibility to filter events by the attribute:value pair.
Fixed an issue in the Hanwha analytics description field.
Motion detection event was removed from the list.
Made it easier to read the descriptions of Analytics Events in the Notification Panel.
Hanwha Analytics Events displayed incorrect names for ROI lines and areas in the Notification Panel. Fixed.
Analytics Events from Hanwha PND-A9081RV were missing object attributes. Fixed.
Fixed a discrepancy between the Desktop Client and the camera’s web interface when the image mode is set to HLC on Hanwha cameras. The HLC level has been renamed from ‘Medium’ to ‘Middle’ in the Desktop Client.
Hanwha XND-6010 did not have audio in archived footage when the audio codec was set to G.726. Fixed.
Hanwha cameras were inaccessible from the Desktop Client if a password containing “%” was used. Fixed.
Level ‘Middle’ for BLC, WDR mode for Hanwha cameras couldn’t be applied via the Desktop Client. Fixed.
KNOWN ISSUES
Hardware decoding doesn’t work on Ubuntu.
Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
PTZ tours are not displayed in the context menu after the first login.
4.1.0.31400 Video Management System PUBLISHED 20 Jul 2020
Release Notes:
CRITICAL COMPATIBILITY NOTICE:
All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
BREAKING CHANGES
MacOS 10.11, 10.12, 10.13 support was dropped: Desktop Client will not work on those OS.
NEW FEATURES
Push Notifications (requires Mobile Client v20.1 or later):
Rules can be created in VMS to send Push Notifications to mobile devices.
Users can receive push notifications from multiple systems and turn on/off notifications for specific systems.
In order to receive Push Notifications, users must be logged into the Cloud in Mobile Client.
Users can create custom text for notifications in the Rules Engine via Desktop Client.
Health Monitoring – Available in the Server Web Admin interface and Cloud Portal, Health Monitoring provides administrators detailed information about a System’s health, including, but not limited to:
Alerts – automatically detected / identified problems with a System
System Info (# of servers, channels, storage located, users, and version)
Network Interfaces (name, server, state, IP address, I/O rates)
Desktop Clients connected to Servers.
New Embedded Browser – Desktop Client now uses a full-featured embedded Chromium browser (v.65.0.3325.230) to display web pages on layouts:
Download Files on Web-Page – the embedded browser in Desktop Client now supports downloading and saving files.
Cameras Web Page in Camera Settings Dialog – camera web pages can now be opened up in the Camera Settings dialog allowing users to configure/access camera web pages inside Desktop Client even when on a different Subnet (i.e., remote connections / outside the LAN / WAN). Server acts like an HTTP(s) proxy from cameras to Desktop Clients.
Video Wall Failover – If a Server with Video Wall licenses fails, the video wall continues working for 7 days. After that, it will be blocked with the error message “Not enough licenses”.
Analytics Events Region of Interest (ROI) – Now it is possible to draw lines, boxes, polygons and more when configuring a video analytic from the Desktop Client (no need to go to the camera web page).
Currently supports Hanwha AI cameras using firmware version 1.41.xx or higher.
PLUGIN / METADATA SDK ENABLED FEATURES
Analytics Events Region of Interest (ROI):
Now it is possible to enable configuration of 3rd party video analytics and draw lines, boxes, polygons and more from the software (no need to go to the camera web page).
Minimum and maximum size of detected objects can be configured from the software.
ROI editor is available in the “Camera settings” dialog and visualized on the video.
This feature is available for developers using the Metadata SDK.
IMPROVEMENTS
Best Server Selection (while connecting to a Cloud-connected Multi-Server System):
In prior releases, Desktop Client would connect to a random available server via Cloud. Now Cloud connections are routed through the Server with the best uplink.
Added the ability for users to specify the preferred Server for connections. The configured Desktop Client will attempt to connect to the preferred Server first, and if it is not reachable, it will detect and connect via the Server with the best uplink.
2-way Audio API – Allows third-party web clients to send audio (from client microphone) to and get audio from cameras.
Added Time Zone option for Virtual Cameras – Time Zone can now be specified for virtual cameras. If “Time Zone” is set to “Auto”, then the time zone is defined by metadata or UTC if there’s no time zone specified in the file. If set to “Client”, the Time Zone is defined by the desktop client.
Server Side Motion Detection improved – False positives detection introduced to increase accuracy of detected motion events (e.g., turning on/off lights or switching camera day/night mode are now likely to be ignored)
Additional action parameter placeholders for the “Do HTTP request” action – Placeholders can be added to the HTTP POST request body to be automatically replaced by the corresponding values from Analytics Event parameters. This feature is only applicable to Analytics and Generic Events. Placeholders syntax:
{event.cameraId} – replaced by the camera ID (e.g., {{{ad1d1b6c-7013-0049-6fd4-ff15450e4716}}})
{event.cameraName} – replaced by the camera name (e.g., PND-9080R)
{event.eventType} – replaced by the event type (e.g., nx.stub.objectInTheArea or nx.stub.lineCrossing)
{event.eventName} – replaced by the event name (e.g., Object in the area or Line crossing)
{event.caption} – replaced by the caption (e.g., “Line crossing – impulse event (caption)”)
{event.description} – replaced by the description (e.g., “Line crossing – impulse event (description)”).
Improved MacOS performance and introduced an experimental setting to limit frame rate and reduce CPU load (see Local Settings -> Advanced).
Improved cloud connectivity on certain network environments.
Added the ability to pin the Timeline in fullscreen mode:
When the Timeline is pinned it will remain fixed on the screen.
If the Timeline is pinned in fullscreen mode and the user leaves fullscreen it will be pinned for all cameras on the layout when the user returns to fullscreen mode.
Database backups are now categorized into the following types:
Created after system merge
Created after updates
Initiated via API
Scheduled.
“Camera selection” dialog was optimized for a large systems.
Added text search in the “Event log” dialog.
“Global Notification Settings” button was removed from the “Show Notification” action.
Added .mpegts files to the list of supported files in Desktop Client.
It is now possible to disable port 80 on firewalls completely and use port 443 for HTTPS connection.
Added the ability to search by object types in the Notification Panel. <param>: <value> returns object where <param> has <value>. For instance, if there are analytic plugins that recognize t-shirt color, gender, and glasses, it is possible to search for analytic events by “T-Shirt: White”, “Gender: Male”, “Glasses: True”.
The default playback state of a camera opened from the Notification Panel has changed. Now a camera remains on Pause once opened.
Users are now imported from LDAP with their Email addresses.
It is now possible to open multiple instances of the Desktop Client by double clicking on the desktop shortcut.
Added information about remaining license deactivations on “License details” and “Confirmation” dialog.
Axis C1004 E speaker did not work as expected. Fixed.
Axis Q3709x fixed.
“Enable audio” was missed in ‘Camera Settings’ dialog for Axis IO module. Fixed.
Pelco cameras were unstable after upgrading from 3.2. Fixed.
AV20CPD-118 uses ONVIF.
Fixed autodiscovery for VIVOTEK SC8131.
Vivotek FD8162 dropped its resolution to very low value after reconnecting, Fixed.
Malformed packets in secondary streams from Uniview cameras caused Smart Motion Detection failures. Fixed.
FPS for secondary stream for Uniview IPC6322SR-X22P-C was not changed. Fixed.
Fixed audio support for ACTi A71.
Fixed an issue with Dahua N25BB5Z connection.
Fixed an issue with stream URL for multi-sensor Dahua cameras.
Analytics enabled for Dahua IPC-HDW4433x.
Fixed Dahua XVR5116HS DVR PTZ issue.
Fixed an issue with stream parameters on the “Advanced” tab for Vivotek FD9187-HT.
Hikvision DS-2TD2636-10 was wrongly triggered by the output after it was opened in VMS. Fixed.
Hikvision analytics events (Line crossing, Intrusion) were triggered only once. Fixed.
‘Contract Violation’ messages appeared on Hikvision analytics events. Fixed.
DWC-PTZ30X stopped working after upgrading from 3.2 to 4.0. Fixed.
Stream profiles assignment fixed for Entropix camera.
Hikvision DS-2TD1217 signal input was triggered but didn’t have any action in the VMS. Fixed.
VideoTec UCHD-30x-VT had interruptions while receiving RTP over multicast. Fixed.
Video stopped working on Vivotek FD8162 when RTP transport was changed to “Multicast”. Fixed.
Fixed an issue with autodiscovery for DWC-PZV2M72T.
Fixed an issue with H.265 for TN-P6236W12.
Motion was continuously detected on DWC-PB6M4T with OSD enabled. Fixed.
BUG FIXES
Fixed client glitches with Intel HD 620 and 630.
Server Web Admin stopped working in Chrome 80. Fixed.
The video stream opened via media server API could not be closed if user permissions or password were changed. Fixed.
Analytics metadata was saved for a part without an archive. Fixed.
The “Confirm storage location for analytics” dialog could not be closed by the “X” button on Desktop Client on Mac. Fixed.
Next/Previous frame navigation didn’t work after reverse playback. Fixed.
2-Way audio did not work, if the client was connected to a server running on a DW Edge camera. Fixed.
Fixed an incorrect message if an update from the file was canceled.
Desktop client tried to auto-reconnect to the system after it was disconnected from Cloud. Fixed.
It was impossible to update the System from file if Desktop Client was the only component to be updated. Fixed.
Sometimes previews of the motion events on the right panel in Desktop Client on Mac displayed with incorrect aspect ratio. Fixed.
Norsk and Dutch (Belgium) were missing on the server’s web page. Fixed.
“Play sound” with a custom audio file didn’t work. Fixed.
Desktop Client on Mac could freeze after multiple transitions to fullscreen mode. Fixed.
Video Wall could hang in fullscreen mode. Fixed.
Virtual Camera was played back incorrectly on the Android client. Fixed.
Virtual Camera could not display files recorded by iPhones on the Timeline properly. Fixed.
Desktop Client could sometimes crash if the “Connect to Server” dialog or webpage on Scene was closed. Fixed.
If trying to view the archive from a camera and switch to another layout and back, the playback position switched to live. Fixed.
The same logicalID could be specified for different layouts. Fixed.
The Desktop Client worked very slowly during export. Fixed
Some RTSP links didn’t work if added manually, but worked in VLC. Fixed.
“Native” ONVIF PTZ presets didn’t work if the preset name in VMS contained some native symbols (like Japanese or Chinese strokes). Fixed.
In rare environments under certain circumstances, the motion detection database may have been corrupted after upgrading to 4.0 which prevented the smart search feature from working correctly. Fixed.
On certain ARM devices (Socionext) Hardware ID was calculated incorrectly causing random server issues. Fixed.
Cloud accounts could not be saved in the “Edit tile” dialog. Fixed.
Server cloud address was displayed on “Add device” dialog. Fixed.
Fixed high CPU usage of minimized Desktop Client with one monitor configuration.
If there were zoom windows on a camera, the “Set to Fullscreen” action would be incorrectly applied to a zoom window instead of the main camera. Fixed.
Fixed a playback bug which occurred after a zoom window was repeatedly opened and closed several times.
Server assigned identical camera IDs for different onboard USB cameras from laptops with the same model and manufacturer. Fixed.
USB webcams were not successfully auto-discovered on servers installed on Ubuntu. Fixed.
Fixed unsupported audio on USB cameras on Ubuntu.
After upgrading to v4.0 “Min days” retention rules could not be set to more than 30 days. Fixed.
Video Wall mode was affected by the “Limit session duration” option in the Desktop Client, as a result, it limited Video Wall sessions. Fixed.
Under complex LDAP configuration conditions Server could fetch less users than expected. Fixed.
Sometimes the webcam light of the laptop turned on even if the camera was not recording and was not opened on Scene. Fixed.
“Enable audio” is disabled now when “Allow System to optimize camera settings” or “Keep camera settings” is set.
The Desktop Client could freeze if a layout was configured to open automatically on startup. Fixed
There were no thumbnails in notification for a generic event with 2 cameras. Fixed.
When primary and secondary streams had different codecs, any gaps in the primary stream when using default export would cause the exported video to be non-playable. Fixed.
Using the CLI to start the Desktop Client and display a specific layout didn’t work if the layout name contained certain symbols (i.e., Japanese strokes). Fixed.
Fixed an issue with incorrect default language in the installer.
Fixed an issue with incorrect default language on Setup Wizard.
In-client context help menu fixes:
Context help for Camera Settings and Server Settings dialogs failed to open up. Fixed.
Context help for “Allow only secure connections” on “System administration” dialog led to an incorrect page. Fixed.
The “–layout-name” CLI parameter did not work for Application Launcher. Fixed.
Fixed occasional crash of Desktop Client in video wall mode.
Fixed occasional crash of Desktop Client while running showreel.
Server could crash when VMAX was removed from the resource tree. Fixed.
Export from cameras with resolution 8MP and greater when transcoding was applied resulted in a broken output file. Fixed.
SMB drive was displayed as “unknown” or as an incorrect storage type. Fixed.
Storage locations with Cyrillic symbols in the path were not discovered. Fixed.
Motion sensitivity did not work for some stitched panorama cameras. Fixed.
In certain environments, Server stopped detecting motion after some time running and occurs until the server is restarted. Fixed.
It was not possible to change reserved space for network drives that required credentials. Fixed.
Bookmarks triggered by instant generic events were not created even if post- and pre-recording was set. Fixed.
Fixed different media server and client crashes.
Fixed some translation issues.
Fixed some vulnerabilities.
Minor UX and UI improvements and fixes.
API/SDK CHANGES/FIXES
SDK Plugin Fixes:
Axis camera plugin from camera SDK didn’t work on Windows. Fixed.
FTP storage plugin sample from storage SDK didn’t work. Fixed.
Image library plugin fixed.
Fixed a memory leak that occured when using an API method to get MPEG-TS streams with transcoding.
Fixed a possible memory leak when using HTTP Streaming API methods.
Added licensing-related RestAPI methods to API documentation.
Video archive downloaded using /media/cameraid.mpegts method with transcoding could not be played back. Fixed.
When trying to request video streams through API (using any /media/ call), the maxWebMTranscoders parameter limited the sessions to 2 even if transcoding was not involved. Now the number of the non-transcoded streams that can be requested through API is unlimited and transcoded-ones are limited to maxWebMTranscoders (2 by default).
API tool in webadmin now works without authentication. The “Test method” button is hidden and fields for post requests are disabled for non-authorized users.
The ec2/analyticsLookupObjectTracks request could hang at certain environments. Fixed.
/api/gettime is now deprecated.
Added the “accurate_seek” url parameter for HTTP Streaming to avoid time difference.
SDKs: improvements to readme.md and Doxygen documentation.
SDKs: improvements to sample building scripts:
Implemented command-line help (`-h`|`–help`|`/?`).
Added the `–release` command-line arg to build Release configuration instead of Debug.
For MSVC, removed forcing the old MSVC2015 compiler (v140 toolset).
Testcamera improvements:
Fixed incorrect syntax in testcamera command help text.
Added multi-track streaming support for testcamera.
Added the “–max-file-size-megabytes” parameter to increase the portion of a video file being streamed (was 100 MB).
Added parameter to specify testcamera mac address (–mac-address-prefix).
API documentation improved:
/ec2/saveCameraUserAttributesList and /ec2/saveCameraUserAttributes: Mark licenseUsed as unused.
/ec2/cameraThumbnail: Fixed incorrect params description: change `roundMethod` to `method`.
Added documentation for /ec2/dumpDatabase and /ec2/restoreDatabase.
The api/ptz method documentation was updated.
Added systemSettings to documentation for api/setupCloudSystem, api/setupLocalSystem.
Description for api/storageStatus and /api/cookeAuthentication methods were updated.
Added description for ‘tag’ parameter for /ec2/bookmarks/add.
Removed /api/executeEventAction from documentation.
Added licensing-related Server API methods to the API documentation.
Improved the description of multiple “tag” parameters in our API documentation.
Added API methods for /api/downloads to the API documentation.
Added a missing parameter to the API documentation for /api/setupCloudSystem and /api/setupLocalSystem.
Server returned 500 and printed ERROR ASSERT on the ec2/saveUsers command without the “id” parameter. Documentation changed, the “”id”” parameter is described as mandatory for “”ec2/saveUsers”” now.”
Added string time format to the API documentation for /ec2/cameraThumbnail.
Added recordingecordQueueB and recordingecordQueueP values to /ec2/metrics/values и /api/metrics/values: dynamic buffering in bytes and per frame.
Added a parameter check for merge possibility without performing the actual merge.
Added an optional GET request parameter “signature” to /media/<cameraId>.mp4. It enables the signature in exported mp4. By default, it’s disabled.
ANALYTICS PLUGIN SETTINGS IMPROVEMENTS/FIXES
Added the possibility to choose a specific video stream that will be used for analysis by a video analytics plugin. This option can be disabled in plugin manifest (hideStreamSelection).
Analytics plugin manifest now supports sections.
Simultaneous operation of multiple Device Agents running on the same camera is now supported.
Analytics settings were changed to their default value after a plugin upgrade. Fixed.
Objects boxes were not shown on the camera if it was not re-opened on a layout after enabling the metadata plugin for the first time. Fixed.
If Default Rotation was changed for a camera after analytics objects detection, the thumbnails of those objects were displayed incorrectly on the Right Panel. Fixed.
Incorrect analytic chunks appeared on the Timeline when Text Search and Area Selection filters were used together. Fixed.
Analytic objects were not shown in Desktop Client when it was connected to the multi-server system where some of the servers did not have the analytics plugin installed. Fixed.
Sometimes playback with analytic chunks stopped working. Fixed.
Improved analytics object search in the area.
Sample Analytics Plugin is included in Metadata SDK.
Improved the description of the method “executeAction” in the Metadata SDK documentation.
Long plugin options descriptions did not fit into the text control. Fixed.
Added the Refresh button to update the settings for the selected plug-in from camera.
Added a new control “Column”. It acts like GroupBox but does not have any frame.
Added a new control “SwitchButton”.
Fixed an issue with bounding boxes of zero size. Metadata objects with bounding boxes of zero size are now correctly shown in the camera item: their text attributes are shown. Such objects can be used to visualize some data calculated by the plugin, e.g., the amount of people appearing in a field of view of a camera.
Servers on Linux machines with Analytics Plugins (built via the SDK) enabled would crash while being shut down. Fixed.
Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (Stretch)).
KNOWN ISSUES/LIMITATIONS
We support only camera web-pages that work in Chrome.
Health monitoring: all metrics and alerts, including aggregated alerts, are erased after the server has been restarted.
Linux Server fails to record analytics metadata to NTFS drives.
Push notifications: sometimes, there are no thumbnails when the associated camera is not recording.
In rare situations on MacOS, 2-way audio doesn’t work after upgrading from 4.0 and previous versions. Reinstall the Desktop client to work around this issue.
USB camera is duplicated as an old offline camera and a new online camera after upgrading from 4.0 to 4.1.
“Line Crossing Object Counting” doesn’t work for DW TD-9541E3 (camera issue).
Analytics DB from 4.0 is partially incompatible with the 4.1 release: a search for metadata objects in a selected area will not work for the objects that were recorded before the update to 4.1 and such objects will not be shown on the image.
Bounding boxes for analytics objects are not shown in Desktop Client when performing text search by an object type.
If the “Enabled” checkbox is not set on Hanwha AI cameras, the line crossing direction will be reset after saving.
Hanwha ROI:
The objects in the Notification Panel may be linked to wrong archive chunks in the timeline.
The border frames of objects may disappear sometimes.
HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
A new Hanwha NVR which is based on Ubuntu 18.04 (tested with 8 channels and 16 channels NVR with kernel 4.15.18):
Integration with Recording, Alarm out and PoE over budget LEDs, input/output alarms
Added a new action “Make buzzer sound”
Added a new event “PoE Over Budget” – event is triggered when current consumption exceeds the predefined limits
Added a new event “Fan Error”
Added the “Power consumption monitoring and control” dialog in “Server settings’.
Hanwha AI camera (tested with model PNO-A9081R and firmware 1.41.01_20200318_R342).
Autofocus icon did not appear if an NVR channel was opened on Scene and just changed the status from offline to online.Fixed.
If the “Backup” media type was used for export from Hanwha NVRs, export from Hanwha SRN-4000 did not work. Fixed.
Operation type for IO sensors was changed when Hanwha NVR was added to the media server. Fixed.
Advanced PTZ didn’t work for Hanwha PTZ camera connected via Hanwha NVR. Fixed.
All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
BREAKING CHANGES:
Android 5.x is no longer supported.
Compatibility with VMS 2.6 and less is not supported.
NEW FEATURES:
Push Notifications (for VMS v4.1 or later):
Rules can be created in VMS to send Push Notifications to mobile devices.
Users can receive push notifications from multiple systems, and turn on and off notifications for specific systems.
In order to receive Push Notifications users must be logged in to the Cloud through their mobile applications.
Notification texts can be configured in VMS.
IMPROVEMENTS:
Session duration is now limited. Mobile clients log out automatically when a session exceeds the specified duration.
Mobile Client pulls video from interfaces according to the “Routing Management” table in VMS.
BUG FIXES:
UI/UX fixed and improvements.
Fixed crash when mobile client was minimized and closed by sliding while thumbnails were loading.
Fixed an issue with “←” and “→” buttons for the first and the last camera on the selected layout. Now it shows the first camera after the last on press on “→” and last after the first on press on “←”.
KNOWN ISSUES:
TESTED OS:
Android 7,8,9,10
iOS 11,12,13
iPadOS 13
INTERNAL:
Fixed a compatibility issue for Nutech customization with DW customization.
All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
BREAKING CHANGES:
Android 5.x is no longer supported.
Compatibility with VMS 2.6 and less is not supported.
NEW FEATURES:
Push Notifications (for VMS v4.1 or later):
Rules can be created in VMS to send Push Notifications to mobile devices.
Users can receive push notifications from multiple systems, and turn on and off notifications for specific systems.
In order to receive Push Notifications users must be logged in to the Cloud through their mobile applications.
Notification texts can be configured in VMS.
IMPROVEMENTS:
Session duration is now limited. Mobile clients log out automatically when a session exceeds the specified duration.
Mobile Client pulls video from interfaces according to the “Routing Management” table in VMS.
BUG FIXES:
UI/UX fixed and improvements.
Fixed crash when mobile client was minimized and closed by sliding while thumbnails were loading.
Fixed an issue with “<” and “>” buttons for the first and the last camera on the selected layout. Now it shows the first camera after the last on press on “>” and last after the first on press on “<“.
Starting August 1st 2019 Google stopped accepting 32-bit applications so this build contains 32-bit and 64-bit applications.
NEW FEATURES:
System Search – If there are 8 or more system tiles Systems can now be filtered by system name, owner name, owner account, and server address.
Enable / Disable Audio – Audio can be switched off on cameras.
Login Lockout – If a user tries to log in with incorrect password 5 more times an error message will appear and the login dialog will be blocked for 1 minute.
Playback using Server or Client Time – Added ability to switch between Server and Client time mode during playback
IMPROVEMENTS:
Time Format Unification – time format (12-hour or 24-hour) now reflects the device OS
Soft Trigger icons are now ordered alphabetically
Added “Disabled by schedule” alert when a Soft Trigger is not available b/c of Rule scheduling
Added “No Live stream” placeholder on virtual camera when viewing in live mode
BUG FIXES:
Live video did not started automatically after the server was restarted. Fixed.
Fixed encoding issue with Chinese traditional language on iOs 13.
Mobile client did not stop pulling video if the system was disconnected from the cloud. Fixed.
Some virtual cameras were played as 8*8 pixels. Fixed.
Several consecutive mobile client connections could lead to server rejecting all incoming connections. Fixed.
Fixed an issue with a blank screen after switching to the camera without an archive.
Fixed an issue with a blank screen after play/pause on camera without an archive.
Fixed an issue with a blank screen after pausing and switching to the camera with an archive.
It was possible to log in to the non-configured system. Fixed.
It was impossible to view 2 minutes up to live from server 3.2. Fixed.
User could not scroll the software trigger using the swipe gestures. Fixed.
If the user tapped and hold on some instant soft trigger, the trigger was not activated on finger release. Fixed.
4.0.0.29988 Video Management System PUBLISHED 31 Oct 2019
Release Notes:
IMPORTANT
UBUNTU 14.04 SUPPORT: Ubuntu 14.04 is no longer supported due to official end of life in April 2019. Please upgrade to Ubuntu 16 or later before updating to this version to avoid issues!
32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
4.0 BETA USERS. Before installing the release version, please remove the old analytics data and plugins. See “https://networkoptix.zendesk.com/hc/en-us/articles/360035628314” for details
NEW OPERATING SYSTEMS/PLATFORMS
ARM Packages released. Please pay attention to the ARM Support Policy details here:
H.265 for ONVIF Devices – The H.265 codec is now supported for cameras detected and managed via ONVIF.
Layout-as-an-Action – A predefined layout can be opened when an event occurs.
Secure Export – EXE and NOV exported files can be protected by a password (option is only available only if export a single stream, not Multi-Video).
Failover on Storage Failure – Failover now also occurs when all designated storage drives fail on a Server.
Virtual Camera – Users can now import offline video files (from wearable cameras, action cams, drones, etc) into archive and associate with a virtual camera which can be used like other cameras in a system.
RTSP / HTTP Dual Stream Support – Users can now add two streams when creating an RTSP/HTTP camera which enables dual streaming and adaptive scaling. When a secondary stream is added, the primary stream also becomes modifiable.
Webcam Support – Webcams (Built-In and USB) are now supported on Windows, Ubuntu Linux, and Raspbian operating systems with dual-streaming and audio support. Great for demos, operator response recording, and more.
Raspberry Pi Camera Support – Install the Server application and add a camera module to turn a Raspberry Pi into a smart IP camera capable of operating on its own or as part of a larger system.
Metadata SDK and Plugins – A software development kit (SDK) for rapid integration of intelligent 3rd party systems and devices. Includes a comprehensive feature set designed for AI and deep learning driven computer vision applications focused on object recognition and automation. Using the Metadata SDK, developers can create Plugins for the Server application that take advantage of key new features, including:
Metadata search by attributes, time interval or region of interest on camera
Object overlays on live video and playback
Camera-specific video analytics settings
Programmatic creation of custom Events in the Rules Engine
Plugin configuration in a new tab in System Administration Dialog.
Added possibility to select storage to store analytics data and other metadata.
Encrypted Video and HTTPS Communications – Added the ability to force the system to use HTTPS and to encrypt video traffic.
C2P Integration – Integration with Convergence to Pixels (aka C2P, http://www.c2p.com/), a product that integrates a wide variety of 3rd party solutions including:
Access Control: Axis A1001, Blue Access Cobalt X1, DMP XR550, Identicard PremiSys, Isonas Pure Access, Keri Systems NXT, RBH AximonV, DSX WinDXS
Custom Watermark over Video – when “Display watermark with username over video” option is checked, the username of the operator who exported the video is displayed on exported video and while viewing.
Cloud System Merge – Cloud connected Systems can now be merged together. Note that Cloud merge now works only on Cloud portal. In order to merge, the same user must have the Owner role in both systems.
Redesigned System Update:
Improved update for systems with multiple servers.
Improved update when bandwidth between servers is low. Update does not fail if a single server drops the connection.
Upgrade for unsupported operating systems can be blocked. If a new version does not support the current operating system for a server the update process will not start.
Updates to the Desktop Client User Interface – comprehensive revamp of UI / UX for improved usability:
Notifications Panel – now includes quick tabs for Notifications, Motion Detection, Bookmarks, Events and Objects as well as the ability to search and filter each respective tab
Resource Panel – Keyword Search has been moved to the top of the Resource panel and operators can now search for Servers, Cameras, Layouts, Showreels, Video Walls, Web Pages, Users and Local Files
Add Device Dialog – added the ability to assign devices to specific servers in a multi-server system
Camera Settings Dialog – redesigned for enhanced readability and usability
Device Selection Dialog – redesigned for enhanced usability
Time Synchronization Dialog – redesigned for enhanced readability
Storage Analytics Dialog. – redesigned for enhanced readability and usability
Action parameters placeholders for the “Do HTTP request” action – Source, Caption or Description placeholders can be added to HTTP POST request body to be automatically replaced by the corresponding values from Generic Event query params. Placeholders syntax:
{event.source}
{event.caption}
{event.description}
Desktop Client CLI launch – Desktop client can be launched with a command line parameter to define initial layout. This allows programming pop-up like behavior.
IMPROVEMENTS
System Scalability – The maximum number of recommended servers, resources, and users in a single System has been increased significantly. If approaching Maximum recommended System size please consult with Support for scalability planning. The maximums below are based on lab testing results and could vary significantly based on the project’s real-world environment.
Maximum Recommended Servers in a System:100
Maximum Recommended Resources (Cameras, NVR Channels, I/O Modules) in a System: 10,000
Maximum Recommended total amount of Users in a System: 1,000.
Paxton Access Control integration support re-implemented.
Update RTSP port – Introduced the ability to modify camera RTSP port from Expert tab.
Overall system security improved with known vulnerabilities addressed.
“Add Device…” option is now available in the main menu.
Added the ability to export several bookmarks in .nov and .exe file from the Bookmark Log dialog.
API Improvements:
Audio export in HLS tracks is supported.
Video Wall advanced API. Improved Rest API methods for working with layouts (getLayout, saveLayout). It is now also possible to display a camera on a specific monitor.
Added watermark for video files exported via HTTP Progressive Downloading API call.
Added mp4 export support for HTTP Progressive Downloading API call.
API: “analytics” periodsType is now listed in ec2/recordedTimePeriods documentation.
Server API improvements and fixes.
New hotkeys for Item actions (top icons):
i = show / hide item Info
m = enter / exit Smart Motion search
p = enter / exit PTZ
d = enter / exit Fisheye Dewarping
w = create Zoom Window.
New hotkeys for Layout actions:
Ctrl + Shift + S = Save Layout As…
→, ↓, PgDn, Space, Enter = next Layout in Showreel
←, ↑, PgUp, Backspace = last Layout in Showreel
Esc = Exit item fullscreen.
Minimum Grid Size for Layout – Users have the option to set a minimum Viewing Grid size (initial number of Viewing Grid items) in layout settings (works in both Desktop client and in Video Wall).
Video Wall Improvements:
It is now possible to add backgrounds to layouts on Video Wall screen.
It is now possible to enable/disable the Timeline on Video Wall.
The Bookmark button was replaced with the Thumbnails button on the Timeline.
Minor UX and UI improvements and fixes.
Added the ability to share cameras between users via drag-and-drop in the Resource Tree.
Licenses:
Edge license keys can be now be deactivated.
More than one Edge license key can now be activated per server.
I/O and Encoder licenses can also now be activated on ARM devices.
Minor context-sensitive help improvements.
Optimized processing of large bookmark databases (500+ MB).
The Local Files list in Resource Panel now updates when a source folder is changed or a file in the folder is removed or added.
Time format is now unified through the whole VMS and is taken from the operating system.
Rules Engine Updates (Events & Actions):
“Set to full screen” and “Exit full screen” actions added to Event Rules engine allowing video items to be displayed in full screen mode based on events.
Checkbox “Omit logging” added to Generic Event. When checked, a Generic Event will not be added to the event log. This allows operators to program display values as a text overlay from Generic Events without making database calls.
“Storage failure” has been renamed to “Storage issue” in the event log/rules.
Added “pre-recording” option to “Device recording” action.
Added “System is updated” event logging to the Audit trail.
“Do HTTP request” action now supports HTTPS urls.
Added event “Plugin event”- Plugins can generate events which can be used to create Rules in the Rules Engine.
Added notification if all servers in the system are not connected to the Internet and time cannot be synchronized with the Internet.
If aspect ratio is set to Auto in the Camera Settings dialog, the aspect ratio of the second stream will be modified to match the first stream.
Added Czech, Brazilian, Swedish, Finnish, Norwegian, Dutch (Belgium) and Brazilian-Portuguese languages support.
Added support for IP address in LDAP URL.
Smart Search is now supported on ARM platforms for H.265 codec streams.
Soft triggers are now sorted alphabetically.
Added the ability to backup database automatically once per day (6 days maximum).
I/O port name shows in related email notifications now.
Minimal buffer size on Desktop client for LIVE mode reduced.
Added server API link for generic event.
Added LDAP search timeout setting.
Added ‘Trust Camera Timestamps’ on “Expert tab. If it is enabled, the archive will be recorded with respect to camera time.
Client now takes into account settings on Routing Management tab and pulls video only from allowed network addresses.
Desktop client can be resized with a command line parameter.
Fetching users from LDAP was optimized a bit.
Changed available listed analytics events in Event Log: analytics events with configured event rule are only shown.
Cloud connectivity (firewalls and proxy servers) improved.
“Admin DN” was renamed to “Admin DN or CN” in LDAP settings.
Added video traffic delivery method indicator on item: Direct connect, NAT traversal (N) and Proxy (P)
Server was sending requests to manually added cameras/streams even when the auto-discovery option was disabled. Now it keeps sending requests only if Failover is enabled.
New hotkey for item: Esc = Exit item fullscreen
Links are supported now in custom text on update notification.
Welcome screen tiles sorting was changed. If a system is hidden it is now removed from the list of tiles.
The following operator actions are no longer allowed on locked layouts: item rotation, cell spacing, aspect ratio changes, interactions with zoom window.
Add client configuration parameters to control the default behavior of the “Info” button. See https://networkoptix.zendesk.com/knowledge/articles/360024662753/en-us?brand_id=1386126.
Added plugins information on the “Server settings” dialog.
NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
New In-Camera Analytics Support:
Added DW MTT analytics support for devices running firmware 4.2.1.0(17898)T)
The following in-camera analytics options were hidden for DW TVT VA cameras:
cross line people counting
crowd density
intruding people detection
object status changed
’Video Cast detection’ also renamed to ‘Abnormal color detection’
Dahua in-camera analytics – tested with firmware 2.622.0000000.31.R, Build Date 2018-08-13
Audio did not work on Axis cameras after upgrade to 9.x firmware. Fixed.
Codec and resolution could not be changed on Axis cameras with 9.x firmware. Fixed.
2-way audio could not be changed on Axis cameras with 9.x firmware. Fixed.
Rule “Output on Soft Trigger” did not work as expected for fixed event duration on AXIS A8105-E. Fixed.
IP address was changing in Resource Panel for Axis cameras with firmware higher than 7.0 causing gaps in the Timeline. Fixed.
Axis I/O module A9161 supported.
Digital Watchdog:
Choppy video experienced with DW-PB6M4T. Fixed.
DWC-MV72i28v was not properly added manually, if ONVIF port differed from 80. Fixed.
DWC-PVX16W – sensors now display separately (no longer stitched).
Multi-channel video streaming for DW multi-sensor cameras is now available through API.
Added 2way audio support for DWC-PF5M1TIR
Preview image did not display on the Fisheye tab for DW CaaS Fisheye cameras. Fixed.
Snapshot in email on motion detection of DWC-PB6M4T panoramic camera with 3 sensors showed image of one random sensor and black for other sensors. Fixed.
Expert setting “Calculate bitrate per GOP” was automatically forced for some DW cameras. Now its default state is “disabled” and it can be modified by operators.
Flickering observed on DW Multi-sensor cameras in Mobile app. Fixed.
Hikvision/Vivotek/Dahua:
”Face detection” was incorrectly detected as an available in-camera analytic for Hikvision cameras. Fixed.
”Line crossing” event didn’t work for Hikvision DS-2CD2555FWD-I and potentially for other models. Fixed.
Desktop client was freezing while viewing H.265 stream from Hikvision DS-2CD6A64F-IHS/NFC in full screen. Fixed.
Hikvision DS-2CD2955FWD-IS failed to stream if audio was enabled and codec was set to g711u. Fixed.
Audio could not be enabled for Hikvision DS-2CD2543G0-IS stream and potentially on other models. Fixed.
Wrong standard resolution was chosen for some Hikvision cameras. Fixed.
After upgrade to version 3.2, codec switched from H.265 to H.264 on Hikvision and Vivotek cameras. Fixed.
Some channels from Hikvision encoders failed to display. Fixed.
VIVOTEK MA9321-EHTV only worked with H265 codec, but not with H264. Fixed.
Max resolution was not always detected correctly for some Dahua cameras. Fixed.
Other Specific Device Updates:
Digital I/O did not work for 2N Helios cameras. Fixed.
Axis encoders, Axis multi-channel cameras and Hikvision multi-channel cameras were added as independent devices causing IP conflict notifications. Fixed.
Server reported RTP errors on UNIVIEW IPC542E-DLC-C when no error existed. Fixed.
Incorrect secondary stream URL was configured on EVO-180WxD. Fixed.
Rule “Generic Event – output trigger” sometimes stopped working on ADAM I/O Modules. Fixed.
Added a possibility to view a multicast stream from ONVIF cameras.
Worked around resolution issue for Honeywell H4W4PER2.
OpenEye c7413-awr supported
BUG FIXES
Snapshot was incorrect in email notification on an Apple Mail client. Fixed.
The Timeline did not appear for offline cameras on offline server in multi-server systems. Fixed.
Single video export did network properly for a few specific cameras. Fixed.
”Target” value was not filled in event log if event camera and action camera were on different servers. Fixed.
PTZ tour speed did not work as expected for ONVIF cameras. Fixed.
Updates tab was broken after opening dialog with a custom update warning. Fixed.
Offline or removed cameras were not displayed in the Resource Panel after storage archive was rebuilt. Fixed.
Could not add external storage with password and enabled quota. Fixed.
Client sometimes froze during “Browse for update File” on MacOS. Fixed.
Sometimes Desktop client failed to connect to Server via Cloud. Fixed.
”Play archive from the web” is removed from email for cameras on server without public IP.
Zoom windows aspect ratio was incorrect for wide items. Fixed.
The Timeline was not shown for video files downloaded from Web Client. Fixed.
Client auto-restart didn’t work on MacOS if two Desktop Clients were opened. Fixed.
Recording did not start when adequate storage space was freed up. Fixed.
.nov file would not open if Desktop Client had not already been opened at least once on MacOs. Fixed.
Server public IP was not detected in rare cases. Fixed.
Adding a new storage with inadequate free space lead to archive removal. Fixed.
Issue with incorrect free space on Advanced settings for storage quota. Fixed.
Auto-discovered multichannel resource channels were distributed between different Servers within the system. Fixed.
Cloud user was not logged out automatically from Desktop Client if password was changed. Fixed.
Incorrect time on Web Client timeline if server local OS time was not synchronized. Fixed.
Incorrect notification occurred for generic event with “+” in source/caption/description. Fixed.
Video archive for some cameras with default password was not available in Web/Cloud Client. Fixed.
Entire system was disconnected from the Cloud if just one Server was detached from the system. Fixed.
Sometimes LPR Analytics feature was not available in Server. Fixed.
Desktop client experienced crashes during Bookmark search with Japanese symbols. Fixed.
Desktop client experienced crashes when adding .*png file to Showreel. Fixed.
Errors displaying the Calendar and the Timeline in the Desktop client when selecting an offline camera on an offline merged server. Fixed.
Gaps in archive occurred when Servers were experiencing high load and time synchronization was turned on. Fixed.
Desktop Client sometimes froze after clicking OK on the “Update is complete” message box. Fixed.
Checkbox “Disable Native presets” in Advanced tab in Camera Settings dialog was disabled for some ONVIF cameras. Fixed.
“Move to position” on dewarped video caused image from camera to black out until the move was complete. Fixed.
Linux-based server monitoring graphs repeatedly dropped to 0 without known reason. Fixed.
In rare cases camera stream URL did not change after camera IP address was modified. Fixed.
Issue with “Restore from backup” feature in Desktop client on Mac OS. Fixed.
H.265 streams pulled from Server could not be played in VLC player. Fixed.
Desktop client did not react to “Time synchronization is disabled” option. Fixed.
Uploading .mp3 files for the “Play sound” action failed. Fixed
Windows-based servers sometimes sent misformatted emails. Fixed
Intrusion Detection notifications were not received from some Hikvision models. Issue has been worked around. Check with support for more info.
Exporting H.265 video stream to .avi file did not work. Fixed.
Layout background images did not work on Mac Client. Fixed.
User could not change the background image in Desktop Client running on Mac OS X. Fixed.
Server misinterpreted the amount of free space on Nx1 causing false-positive “System Drive Full” event. Fixed.
Servers status process worked incorrectly with experimental p2p mode enabled. Fixed.
“Allow System to optimize device settings” checkbox was set incorrectly after upgrade on Ubuntu. Fixed.
Issue with the timestamp on “Export video” dialog for part of an archive with daylight saving time. Fixed.
API function “Download archive” allowed downloading only low quality stream even though camera had only one (high quality) stream. Fixed.
Incorrect screenshot requested from the video archive on some cameras which support codec changing. Fixed.
RTSP stream from server could not be pulled with “codec=mjpeg” parameter. Fixed.
One-click update failed in some multi-server environments. Fixed.
System Administration Dialog window height was too large for display and could not be changed when more than 50 servers were merged in a System. Fixed.
The “Camera disconnected” event was not aggregated by cameras. Fixed.
Fixed playback issues that happened when playing archive with gaps in Web Client.
Wrong screenshots from cameras were displayed in notification panel when Generic Events occurred. Fixed.
Server was unable to play some streams added as RTSP links. Fixed.
Reported stability issues with Server RTSP streaming. Fixed.
Mediaserver continued recording to the target directory even after target device had been unmounted. Fixed.
Sometimes archive was not available after archive reindex for storages with 10000+ files. Fixed.
Motion search was reset if any other camera panel button was pressed. Fixed.
Multicast stream with the same port but with different IP didn’t work. Fixed.
Calendar worked incorrectly for current date with enabled thumbnails on timeline. Fixed.
HLS live stream did not display in Microsoft Edge. Fixed.
Server detected only one analytics event for Hikvision camera after start. Fixed.
When logging in as “Live Viewer”, opening several cameras and pressing Space, “Not enough licenses” message appeared. Fixed.
CIFS storage was not unmounted when server was shut down.Fixed.
Footage from “deleted cameras” was not accessible after rebuilding the Archive Index on a new Server. Fixed.
Now desktop client uses currently connected server for all LDAP request.
Saved password on welcome screen was changed automatically when user changed his password. Fixed.
Client sometimes froze when opening/closing multiple RTSP streams. Fixed.
Incorrect Japanese Translation. Fixed
Server crashed intermittently when importing a large number of users (more than 6000). Fixed.
Slider position was incorrect if user paused video, switched to another tab and back. Fixed.
2-way audio button was displayed on items on preview search layout. Fixed.
Other users local files were shown in resource tree. Fixed.
HLS did not work with a camera that had dot in unique resource name. Fixed.
Desktop client windows did not properly scale when dragging between screens with different resolutions. Fixed.
Bookmark could be searched via a deleted tag. Fixed.
The “Setup new system” dialogue appeared before the EULA was accepted. Fixed.
Smart search area was reset after making a screenshot. Fixed.
HTML tags were not processed correctly in the custom update notification. Fixed.
All exported files were read-only after exporting “read-only” file, regardless of applied export settings. Fixed.
Server Setup dialog was not translated. Fixed.
Layout aspect ratio was not changed if only one camera was opened on the layout and AR was changed for it. Fixed.
Aspect ratio for layout with background changed after the first item dropped to such layout. Fixed.
After reconnecting to another cloud system a mouse click was simulated on MacOS client before a user actually clicked on anything. Fixed.
“Edit” and “Hide” context menu items were not translated on tiles. Fixed.
Exported layout where rotation or aspect ratio change was applied to items displayed as unsaved. Fixed.
Current bitrate was not shown on “Storage Analytics” for cameras with Motion+Low res recording. Fixed.
Camera full screen mode did not work in Chrome. Fixed.
Web client did not work for all new web users. Fixed.
Several memory leaks identified during testing. Fixed.
Sometimes cameras added as RTSP streams froze. Fixed.
Sometimes old archive become unmanaged by Server and not accessible. Fixed.
Fixed issues with synchronization with the internal archive of Lilin cameras.
NEW OPERATING SYSTEMS/PLATFORMS
Universal linux_arm32 distribution for Banana Pi M3 and Raspberry Pi 3 model B.
MacOS 10.15 “Catalina”.
Ubuntu Linux 18.04 LTS now supported.
NVIDIA Jetson Support – Server application and Desktop Client installation packages are now available for NVIDIA Jetson Nano, TX2 and Xavier developer boards with Nvidia JetPack installed. Desktop client for NVIDIA Jetson is an experimental feature now. We appreciate any feedback.
Universal linux_arm64 distribution for ARM-64 platform – Server application and Desktop client installation packages are now available. It is an experimental feature now. We appreciate any feedback.
OS X 10.13: “High Sierra”, 10.14: “Mojave”, 10.15 “Catalina”.
Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (Stretch)).
BREAKING CHANGES
32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported.
Ubuntu 14.04 is no longer supported due to official end of life in April 2019.
Windows Server 2008 support was dropped.
KNOWN LIMITATIONS
USB Webcams will only be discovered if they are recognized by the operating system they are installed upon. Windows often automatically installs the driver for USB webcams. Ubuntu Linux typically requires driver / 3rd party software installation in order for a USB webcam to be recognized.
Audio is disabled for the Raspberry Pi camera.
HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
Hanwha cameras lens control now supported.
Multicast stream support via generic RTSP – User must enable multicast (RTSP) in the video profile for Hanwha IP cameras before streams can be added to a Server using generic RTSP (example RTSP stream address: rtsp://192.168.0.78/multicast/profile5/media.smp).
Temperature change detection (tested on TNO-4030T).
New PTZ Support:
PTZ Override now supported for Box Camera / Zoom Box Camera with RS-422/485
Hanwha XRN-2010 Advanced PTZ Support added
Improved PTZ movement (increased smoothness) for many Hanwha cameras
PTZ capabilities added for all SPE encoders. PTZ capabilities can now be modified on the “Expert” tab in the Camera Settings dialog
Hanwha SNF-8010 camera misreported “PTZ” icon fixed.
Other Device Fixes:
Analog Encoder License support added for Hanwha SPE-* encoders
Hanwha SNP-5300 initialization fixed
Audio setup in NVR camera channels was missing in advanced camera settings. Fixed
If PNM-9000VQ channels each had a different resolution they showed incorrectly in the “Advanced” tab. Fixed
X Series Cameras were discovered twice. Fixed
Camera output via NVR support added
Added ”Smart Zoom” support for Hanwha 4-headed ‘fixed’ lens camera with built-in 2M 32x PTZ camera (PNM-9320VQP). Once “Smart Zoom” button is clicked, users can draw a box on any fixed sensor video to launch the PTZ camera and target the user input zoom area.
Incorrect timeline for SRD-1685. Fixed.
Sometimes SPE-410 was discovered twice. Fixed.
XRN-1610 worked incorrectly if NVR password contained ‘:’ . Fixed.
Hanwha servers RAID diagnostic notification – If one on the disk in the RAID goes offline, notification is generated.
Added ability to view a multicast stream from ONVIF and Hanwha cameras.
Not all chunks were shown on timeline from Hanwha NVR in case of “Cont+Evnt” recording type. Fixed.
Unable to view archive from NVR channel with offline camera. Fixed.
Resolution could be changed via Advanced settings even if the “Keep camera streams and profiles settings” option was set. Fixed.
While controlling PTZ move on XRN-2010 the camera was still moving after the mouse button was released. Fixed.
NVR channel audio checkbox “Enable Audio” was disabled until NVR was re-registered. Fixed.
Incorrect audio bitrate in the “Advanced” tab for PNF-9010. Fixed.
Live and archive video didn’t work in Web Client for systems with NVRs. Fixed.
Starting August 1st 2019 Google stops accepting 32-bit applications and publish them on Play Market. Afterwards previously uploaded 32-bit apps will still be available on Google play, only new applications won’t be accepted.
This version is provided in 32-bit format so it is crucial to update it on Google Play before August 1st.
IMPROVEMENTS:
Earphone speaker was used to play back sound from cameras on iOS. Now loudspeaker is used by default.
BUG FIXES:
Some new mobile devices displayed a black screen instead of video from certain fish-eye cameras. Fixed.
Fixed wrong aspect ratio for Fish-eye cameras while navigating with “<” and ”>” buttons.
The video from cameras was displayed pixelated on some servers with low processor power. Fixed.
Smart Motion Search – Users can now search archived video by selecting an entire video or specific area. When Smart Motion Search has been activated users will see only parts of the archive where motion has been detected.
IMPROVEMENTS:
Added previous / next time period buttons – navigating through archive on the Timeline is easier now.
Timeline zoom level does not change while switching between cameras.
Added Finnish language.
BUG FIXES:
“Best quality” was disabled in portrait mode with QHD video on iPhone devices. Fixed.
Server tiles occupied only a part of the screen on iPad Pro. Fixed.
Known compatibility issues with iPad Pro. Fixed.
Incorrect authorization form was displayed if user input an invalid cloud username and password and then clicked “Back”. Fixed.
3.2.0.20840 Video Management System PUBLISHED 27 Jul 2018
Release Notes:
ATTENTION!!!
If you are on Windows 7, please make sure the following updates are NOT installed. If they are installed, please uninstall them first or you may experience issues with upgrade!:
KB4340556
KB4338818
KB4054530
See details *[here](https://support.hanwhasecurity.com/hc/en-us/articles/360007621613)*
DO NOT UPGRADE SYSTEMS USING THE PAXTON INTEGRATION TO THIS PATCH. This release of v3.2 does not support Paxton Access Control, which is implemented in the build 3.2.0.28100 or higher.
NEW DEVICE SUPPORT/IMPROVEMENTS
Analog Encoder License support for Hanwha SPE-1610/410 encoder models.
BUG FIXES:
Audio playback/export did not function as expected on Hanwha NVRs. Fixed.
Server did not initialize properly If a large storage drive was mounted to server directory. Fixed.
Analytics events did not function as expected for some Hikvision cameras. Fixed.
Italian language icon was missing in the Local Settings Dialog. Fixed.
IMPROVEMENTS:
Added Ukrainian language.
——————————————————————————————————————
———– INITIAL RELEASE NOTES FOR 3.2.0.20807 (Jul 09, 2018) ———–
——————————————————————————————————————
NEW FEATURES
NVR improvements (X, P, Q series)
PTZ support
Cameras advanced settings support
Secondary stream for NVRs support during Live
In-Camera Analytics Support – Users can now use in-camera analytics events when creating rules in the rules engine for Axis, Digital Watchdog, and Hikvision cameras (previously only Hanwha).
Enhanced Export – a completely redesigned video export with the ability to burn in watermark logos during export.
Export Bookmarks from Timeline – a button has been added to allow users to export bookmarks directly from the Timeline.
Custom Camera Logical ID – Users can assign a custom Logical ID in the Camera Settings dialog to create an alias for the Camera ID in server API calls.
Contextual Help Revamp – A fully revamped version of the help manual.
Ability to change image resolution and adjust bitrate (fine tuning) for:
Axis
Acti
Hikvision
ONVIF cameras
PTZ support added for some old Samsung cameras.
H.265 support for DWC-MTT4Wi36.
G.726 audio playback support.
G.726 and G.711 audio export to mp4 support.
FPS limit increased to 10 for Arecont Vision AV12275 and AV12276 cameras
DWC-PVX16W, DWC-PVX16W4, DWC-PVX16W6, DWC-PVX16W28, DWC-PZ21M69T multi-sensor cameras now have stitched view.
IMPROVEMENTS
Redesigned video export.
Vulnerability fixes.
EULA fixes in Windows installer and server web page.
If EULA is updated, it is shown once on client launch and needs to be accepted.
Comprehensive user manual updates.
Analytics event types are split into impulse and stateful.
Developer feedback links were removed.
Improved minimum firmware warning for NVR.
Added message “Too many connections” for NVR in Web Client.
Added “Setup password” message in Web Client.
Cloud Beta warning has been removed from the System Administration dialog.
Events are split into groups in the Event Rules dialog.
Added a context menu to all local system tiles on the Welcome page.
Improved timeline behavior when motion search is activated.
Separate “Web page” tab in “Camera Settings/Advanced” dialog.
Database backup performed automatically prior to merging systems.
If multiple cameras do not support chosen event, a warning message is displayed.
Improved support for multi-sensor cameras (by UI and license).
Screen recording is disabled for users without Export Archive permission.
Checkbox “Launch video wall when Windows starts” is set by default now.
“Do HTTP Request” action improvements: multiple methods are supported (POST, GET, DELETE, PUT etc).
USB storage support. USB storage is not enabled by default but can be enabled with a parameter in config file.
Adaptive Scaling improvements.
Improved context help.
“Local files” are no longer automatically expanded in the Resource Tree.
An administrator fetched by LDAP can now modify LDAP settings and fetch users.
MAC OS FIXES:
Improved timeline on Web Client for retina displays.
Improved marker fade animation when timeline panel hides.
Animation of the time marker for NOV files is not smooth. Fixed.
Bug Fixes:
Cloud connectivity issues on ARM devices. Fixed.
System time was shown in UTC instead of correct time zone. Fixed.
Incorrect timeline in multi-video export. Fixed.
License key was truncated on “System Administration/Licenses”. Fixed.
Calendar showed incorrect date if client and server dates were different. Fixed.
It was possible to change the password for a particular channel on multi-channel devices. Fixed.
Links to the video were added to “Input event” email for a camera without recording. Fixed.
Scene went upside down if client switched to window mode and Resource Tree was resized from maximum to minimum. Fixed.
“The pipe is being closed” issue while upgrading through the installer. Fixed.
Manual activation link was unclickable in “System Administration/Licenses/Manual Activation”. Fixed
Network Storage drive could be initialized first, which was slow. Local drives are now always initialized first, which is fast, so recording starts quickly no matter what.
UDP multicast stream recording could stop after some time although live view was ok. Fixed.
Advanced settings were not shown as a web page for DW-CPRO cameras. Fixed.
“No Signal” error for Hikvision 2CD6362F-I. Fixed.
RTSP streams from VLC as RTSP server could not be viewed in Wave. Fixed.
Connectivity issues with Axis cameras opened in Web Client from Cloud Admin interface. Fixed.
DW cameras showed “404” error instead of web page in the “Advanced” tab. Fixed.
DTV cameras caused severe memory leaks in Media Server. Fixed.
Cameras added as generic RTSP links reappeared instantly after removal. Fixed.
DWC-PB6M4T camera improperly worked after autodiscovery. Fix was tested with firmware ver. 1.0.4.030b build on 2017-01-24.
“Offline” tiles could not be removed from the welcome screen. Fixed.
Resolution was immediately switched to low quality during fast forward and rewind regardless of CPU load. Fixed.
Auto-discovered NVR was shown in the Resource Tree as an unauthorized camera. Fixed.
Default password change was not detected in “Camera Settings” dialog. Fixed.
Motion detection analytics event was not triggered on Wave for ENCODER SPE-1610s. Fixed.
Hanwha XRN-1610 with a new firmware (2.10) did not work in Wave. Fixed.
Hanwha PRN-4011 hung if Client tried to play archive from 15 channels. Fixed
Timeline was not displayed for Hanwha NVR with many cameras and small chunks. Fixed.
Server did not start on RPI. Fixed.
“Enable audio” option was available for Axis cameras without audio support. Fixed.
Server added only a single stream from Axis Q6000. Now all four sensors can be added.
Archive backup bandwidth limit did not work for local drives. Fixed.
Server failed to add NAS with domains specified in username. Fixed
Video wall improperly detected screen geometry if more than six displays were attached. Fixed.
Audit trail did not log unsuccessful login attempts. Fixed.
In multi-server systems, camera could be recorded to several servers simultaneously. Fixed.
Server did not add Axis P3707 camera after a successful search. Fixed.
Single and multi-sensor cameras played asynchronously. Fixed.
Different UI and user manual translation issues. Fixed.
Client sometimes stuck when several clients were open. Fixed.
“Initialize focus” button did not work for Hanwha QND-7080. Fixed.
Uniview DVS4116 auto discovered information was incorrect. Fixed.
Axis horn speaker failed to work after upgrade to 3.1. Fixed.
Local time synchronization might misbehave if CPU clocks were imprecise. Fixed.
Multi-channel cameras had incorrect resolution in “Information” overlay in 2×2 mode. Fixed.
No audio from Acti cameras of AB2L platform. Fixed.
Dahua DH-SD22404T-GN PTZ did not follow in-client joystick commands. Fixed.
Dragging zoom window between ultra-widescreen and normal camera caused aspect ratio misbehavior. Fixed.
Sound from some cameras was played back with distortion on high frequencies. Fixed.
If camera was manually added and camera IP was changed after that, camera IP was not adjusted after new manual search. Fixed.
Various server and client crashes fixed.
Slight API documentation fixes.
TESTED OS:
Windows 7
Windows 8
Windows 8.1
Windows 10
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Windows Server 2016 v1607
Windows 10 Enterprise
Ubuntu 14.04 LTS
Ubuntu 16.04 LTS
OSX 10.11: “El Capitan”
OSX 10.12: “Sierra”
OSX 10.13: “High Sierra”
Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (stretch))
Raspberry PI 3 Model B Vi. 2 Kernel version 4.9 (Linux 8.0 (jessie))
Banana Pi BPI-M1/BPI-M1+ Kernel version 3.4 (Linux 8.0 (jessie))
KNOWN LIMITATIONS:
Advanced Settings do not work for multi-channel cameras (PNM series except PNM-9020) via NVR.
DW Analytics.
Events don’t work if VCA and MD events are enabled simultaneously.
Need to wait for 2 minutes after event is enabled on camera web page.
Events work for all zones but don’t work for a specific zone.
Events stop working if camera CPU is more than 80%.
DW MTT Analytics:
Some events do not work simultaneously on DWC-MTT series cameras.
Camera sends spurious notifications for some events when settings are changed.
Axis analytics. If Axis People Counter is enabled on Axis camera, auto and manual discovery don’t work in software. Camera issue.
Recorded G.726 audio with 16 Kbit bitrate is not played in archive.
3.2.0.20807 Video Management System PUBLISHED 06 Jul 2018
Release Notes:
NEW FEATURES
In-Camera Analytics Support – Users can now use in-camera analytics events when creating rules in the rules engine for Axis, Digital Watchdog, and Hikvision cameras (previously only Hanwha).
Enhanced Export – a completely redesigned video export with the ability to burn in watermark logos during export.
Export Bookmarks from Timeline – a button has been added to allow users to export bookmarks directly from the Timeline.
Custom Camera Logical ID – Users can assign a custom Logical ID in the Camera Settings dialog to create an alias for the Camera ID in server API calls.
Contextual Help Revamp – A fully revamped version of the help manual.
Ability to change image resolution and adjust bitrate (fine tuning) for::
Axis
Acti
Hikvision
ONVIF cameras
PTZ support added for some old Samsung cameras.
Hanwha NVR improvements
PTZ support
Cameras advanced settings support
Secondary stream for NVRs support
H.265 support for DWC-MTT4Wi36.
G.726 audio playback support.
G.726 and G.711 audio export to mp4 support.
FPS limit increased to 10 for Arecont Vision AV12275 and AV12276 cameras
DWC-PVX16W, DWC-PVX16W4, DWC-PVX16W6, DWC-PVX16W28, DWC-PZ21M69T multi-sensor cameras now have stitched view.
IMPROVEMENTS
Redesigned video export.
Vulnerability fixes.
EULA fixes in Windows installer and server web page.
If EULA is updated, it is shown once on client launch and needs to be accepted.
Comprehensive user manual updates.
Analytics event types are split into impulse and stateful.
Developer feedback links were removed.
Improved minimum firmware warning for NVR.
Added message “Too many connections” for NVR in Web Client.
Added “Setup password” message in Web Client.
Cloud Beta warning has been removed from the System Administration dialog.
Events are split into groups in the Event Rules dialog.
Added a context menu to all local system tiles on the Welcome page.
Improved timeline behavior when motion search is activated.
Separate “Web page” tab in “Camera Settings/Advanced” dialog.
Database backup performed automatically prior to merging systems.
If multiple cameras do not support chosen event, a warning message is displayed.
Improved support for multi-sensor cameras (by UI and license).
Screen recording is disabled for users without Export Archive permission.
Checkbox “Launch video wall when Windows starts” is set by default now.
“Do HTTP Request” action improvements: multiple methods are supported (POST, GET, DELETE, PUT etc).
USB storage support. USB storage is not enabled by default but can be enabled with a parameter in config file.
Adaptive Scaling improvements.
Improved context help.
”Local files” are no longer automatically expanded in the Resource Tree.
An administrator fetched by LDAP can now modify LDAP settings and fetch users.
MAC OS FIXES:
Improved timeline on Web Client for retina displays.
Improved marker fade animation when timeline panel hides.
Animation of the time marker for NOV files is not smooth. Fixed.
BUG FIXES:
Cloud connectivity issues on ARM devices. Fixed.
System time was shown in UTC instead of correct time zone. Fixed.
Incorrect timeline in multi-video export. Fixed.
License key was truncated on “System Administration/Licenses”. Fixed.
Calendar showed incorrect date if client and server dates were different. Fixed.
It was possible to change the password for a particular channel on multi-channel devices. Fixed.
Links to the video were added to “Input event” email for a camera without recording. Fixed.
Scene went upside down if client switched to window mode and Resource Tree was resized from maximum to minimum. Fixed.
“The pipe is being closed” issue while upgrading through the installer. Fixed.
Manual activation link was unclickable in “System Administration/Licenses/Manual Activation”. Fixed
Network Storage drive could be initialized first, which was slow. Local drives are now always initialized first, which is fast, so recording starts quickly no matter what.
UDP multicast stream recording could stop after some time although live view was ok. Fixed.
Advanced settings were not shown as a web page for DW-CPRO cameras. Fixed.
“No Signal” error for Hikvision 2CD6362F-I. Fixed.
RTSP streams from VLC as RTSP server could not be viewed in Nx. Fixed.
Connectivity issues with Axis cameras opened in Web Client from Cloud Admin interface. Fixed.
DW cameras showed “404” error instead of web page in the “Advanced” tab. Fixed.
DTV cameras caused severe memory leaks in Media Server. Fixed.
Cameras added as generic RTSP links reappeared instantly after removal. Fixed.
DWC-PB6M4T camera improperly worked after autodiscovery. Fix was tested with firmware ver. 1.0.4.030b build on 2017-01-24.
“Offline” tiles could not be removed from the welcome screen. Fixed.
Resolution was immediately switched to low quality during fast forward and rewind regardless of CPU load. Fixed.
Auto-discovered NVR was shown in the Resource Tree as an unauthorized camera. Fixed.
Default password change was not detected in “Camera Settings” dialog. Fixed.
Motion detection analytics event was not triggered on Wave for ENCODER SPE-1610s. Fixed.
Hanwha XRN-1610 with a new firmware (2.10) did not work in Wave. Fixed.
Hanwha PRN-4011 hung if Client tried to play archive from 15 channels. Fixed
Timeline was not displayed for Hanwha NVR with many cameras and small chunks. Fixed.
Server did not start on RPI. Fixed.
“Enable audio” option was available for Axis cameras without audio support. Fixed.
Server added only a single stream from Axis Q6000. Now all four sensors can be added.
Archive backup bandwidth limit did not work for local drives. Fixed.
Server failed to add NAS with domains specified in username. Fixed.
Video wall improperly detected screen geometry if more than six displays were attached. Fixed.
Audit trail did not log unsuccessful login attempts. Fixed.
In multi-server systems, camera could be recorded to several servers simultaneously. Fixed.
Server did not add Axis P3707 camera after a successful search. Fixed.
Single and multi-sensor cameras played asynchronously. Fixed.
Different UI and user manual translation issues. Fixed.
Client sometimes stuck when several clients were open. Fixed.
”Initialize focus” button did not work for Hanwha QND-7080. Fixed.
Uniview DVS4116 auto discovered information was incorrect. Fixed.
Axis horn speaker failed to work after upgrade to 3.1. Fixed.
Local time synchronization might misbehave if CPU clocks were imprecise. Fixed.
Multi-channel cameras had incorrect resolution in “Information” overlay in 2×2 mode. Fixed.
No audio from Acti cameras of AB2L platform. Fixed.
Dahua DH-SD22404T-GN PTZ did not follow in-client joystick commands. Fixed.
Dragging zoom window between ultra-widescreen and normal camera caused aspect ratio misbehavior. Fixed.
Sound from some cameras was played back with distortion on high frequencies. Fixed.
If camera was manually added and camera IP was changed after that, camera IP was not adjusted after new manual search. Fixed.
Various server and client crashes fixed.
Slight API documentation fixes.
TESTED OS:
Windows 7
Windows 8
Windows 8.1
Windows 10
Windows Server 2008
Windows Server 2008 R2
Windows Server 2012
Windows Server 2012 R2
Windows Server 2016 v1607
Windows 10 Enterprise
Ubuntu 14.04 LTS
Ubuntu 16.04 LTS
OSX 10.11: “El Capitan”
OSX 10.12: “Sierra”
OSX 10.13: “High Sierra”
Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (stretch))
Raspberry PI 3 Model B Vi. 2 Kernel version 4.9 (Linux 8.0 (jessie))
Banana Pi BPI-M1/BPI-M1+ Kernel version 3.4 (Linux 8.0 (jessie))
KNOWN LIMITATIONS:
DW Analytics.
Events don’t work if VCA and MD events are enabled simultaneously.
Need to wait for 2 minutes after event is enabled on camera web page.
Events work for all zones but don’t work for a specific zone.
Events stop working if camera CPU is more than 80%.
DW MTT Analytics:
Some events do not work simultaneously on DWC-MTT series cameras.
Camera sends spurious notifications for some events when settings are changed.
Axis analytics. If Axis People Counter is enabled on Axis camera, auto and manual discovery don’t work in software. Camera issue.
Recorded G.726 audio with 16 Kbit bitrate is not played in archive.
Export H.265 to .avi is not supported.
Advanced Settings do not work for multi-channel cameras via NVR.
Wave VMS Stable Releases
Sök i kunskapsbas
Wave VMS Stable Releases
4.2.0.32841 Video Management System
PUBLISHED 27 Apr 2021
Release Notes:
In-Client Upgrade:
Download Links:
LINUX
WINDOWS
MACOS
ARM
SDK
4.2.0.32659 Video Management System
PUBLISHED 17 Mar 2021
Release Notes:
In-Client Upgrade:
Download Links:
LINUX
WINDOWS
MACOS
ARM
SDK
20.4.32276 Mobile Client
PUBLISHED 19 Dec 2020
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
4.1.0.31948 Video Management System
PUBLISHED 14 Oct 2020
Release Notes:
In-Client Upgrade:
Download Links:
LINUX
WINDOWS
MACOS
ARM
SDK
20.3.31784 Mobile Client
PUBLISHED 15 Sep 2020
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
4.1.0.31400 Video Management System
PUBLISHED 20 Jul 2020
Release Notes:
In-Client Upgrade:
Download Links:
LINUX
WINDOWS
MACOS
ARM
SDK
20.2.31377 Mobile Client
PUBLISHED 16 Jul 2020
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
20.1.31254 Mobile Client
PUBLISHED 08 Jul 2020
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
19.6.30204 Mobile Client
PUBLISHED 27 Dec 2019
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
19.5.30066 Mobile Client
PUBLISHED 04 Dec 2019
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
4.0.0.29988 Video Management System
PUBLISHED 31 Oct 2019
Release Notes:
In-Client Upgrade:
Download Links:
LINUX
WINDOWS
MACOS
ARM
SDK
19.4.29834 Mobile Client
PUBLISHED 04 Oct 2019
Release Notes:
In-Client Upgrade:
Download Links:
IOS
19.3.29420 Mobile Client
PUBLISHED 24 Jul 2019
Release Notes:
In-Client Upgrade:
Download Links:
IOS
ANDROID
19.1.29041 Mobile Client
PUBLISHED 24 May 2019
Release Notes:
In-Client Upgrade:
Download Links:
ANDROID
IOS
18.4.24021 Mobile Client
PUBLISHED 16 Oct 2018
Release Notes:
In-Client Upgrade:
Download Links:
ANDROID
IOS
3.2.0.20840 Video Management System
PUBLISHED 27 Jul 2018
Release Notes:
In-Client Upgrade:
Download Links:
ARM
LINUX
MACOS
WINDOWS
3.2.0.20807 Video Management System
PUBLISHED 06 Jul 2018
Release Notes:
In-Client Upgrade:
Download Links:
ARM
LINUX
MACOS
WINDOWS
17.3.0.16043 Mobile Client
PUBLISHED 20 Sep 2017
Release Notes:
In-Client Upgrade:
Download Links:
ANDROID
IOS