Hanwha Techwin

Soft trigger i Wave med Generic event

  1. Vi kommer att behöva ha tillgång till Wave serverns websida som vi når via våran webbläsare lokalt på waveserverns ip address :7001 där vi kan logga in med user: admin och det lösenord som ni givit till lokal admin.
  2. Man kan även nå serverns webgränssnitt via Hanwhas vmsproxy. Det du måste veta är då vad ditt system heter på Wavesync. Logga in på Wave sync och klicka på ditt system. i webbadressen kommer du se ett nummer likt nedan. Detta är ditt systems id.
  1. Om du kopierar det numret och byter ut det röda numret nedan till ditt då kommer du direkt in till din server.
  2. https://6d250824-4424-422c-b3e3-782e05679b9c.relay.vmsproxy.com/static/index.html#/settings/server
  3. Logga in med ditt lokala admin och admin lösenordet.

Tryck på For Developers och sedan API Testing Tool (New)

Gå tillbaka in i Wave Klienten

Skapa en Softtrigger(utlösare) i Wave. Höger klicka på kamera bilden och välj Camera rules (Kamera regler)

Skapa en utlösare välj en eller flera kameror den skall vara synlig på och vilka användare som ska få se knappen.

Döp knappen ”Larm på” och välj ikon. På åtgärd gör du en http-förfrågan.

URL i http förfrågan skall vara https://Wave serverns IP:7001/api/createEvent?caption=ALARMON

Samt admin till wave samt lösenordet för admin kontot i wave.

Det vi gör med detta skript är att vi skapar ett event som heter ALARMON på Wave Servern som vi sedan kan lyssna efter och göra en regel emot.

2. Gör en likadan för Alarm Av ( https://Wave serverns ip:7001/api/createEvent?caption=ALARMOFF )

3. För att få endast en utlösare att synas åtgången så skall vi göra så här

Skapa en regel Generisk händelse (Generic event)

Nu ska vi Lyssna efter det event som vi skapat här ovan för att kunna bygga en regel eller flera regler som vi vill skall köras när man trycker på knappen.

Nedan kan du inte kopiera id raden i Http innehållet. Här måste vi gå tillbaka in i webgränssnittet på Wave servern och använda API Testing TOOL. Se nedan hur vi finner den infon.

Tryck Copy och öppna Notepad på din datorn och klistra in all text. Nu skall vi leta!

Nu skall vi försöka leta upp Larm av och se vilket id den skall ha.

Så tillbaka till Wave, Denna regel är för att säga till Wave att Larm På utlösare (soft trigger) skall synas i kamera bilden. Disabled = False (alltså den är synlig. Admin och admin lösenord.

Nu skall vi göra en till fast för ALARMOFF

Här nedan ser vi regler för våra utlösare (soft trigger). Nedan ser vi ALARMON i vit den är aktiv och alltså är larmet av. När vi trycker på utlösaren Larm på då avaktiveras den utlösaren och aktiverar utlösaren ALARMOFF. Det ger oss alltså bara 1 utlösare åtgången i Wave och vi kan därför veta om larmet är på eller av.

Nu måste vi göra samma förfarande för ALARMOFF,

in i webgränssnittet för servern och använd API tool, Men nu skall vi söka på Larm p (då å inte finns i skriptet bort ser jag från det. se bild nedan.

Larmet av, valet finns att larma på

Larmet på, valet finns att larma av

Nu skall vi koppla flera kameror till denna utlösare så att det händer nått =)

Nu skapar vi en generisk händelse som ska lyssna på ALARMON och kommer då utföra detta skript till kameran

Vi skriver alltså in inloggningsuppgifterna till kameran. Detta ät en Dahua tioc kamera men du kan använda vilken tillverkare oh modell du vill men skriptet till kamerorna kommer skilja sig.

För att se dessa skript se vår andra lathund här https://www.adisupport.se/knowledge-base/tioc-kameran-i-wave

kamera 1 larma på vid ALARMON

Kamera 2 Larma på vid ALARMON

Samma sak fast larma av

Här Kamera 1 Larma av vid ALARMOFF

Kamera 2 Larma av vid ALARMOFF

Tack för mig

Wave VMS Stable Releases

4.2.0.32841 Video Management System
PUBLISHED 27 Apr 2021

Release Notes:

  • ++++++ HOTFIX RELEASE IMPROVEMNTS / BUG FIXES ++++++
  • ANALYTIC BUG FIXES:
    • Fixed an issue where analytic events did not show up in the Notification Panel for Hikvision DS-2CD3T56G2-4IS on firmware V5.5.150 build 200927.
    • Instant analytic events stopped showing up in the Notification Panel after the first time they were triggered. Fixed.
  • BUG FIXES:
    • Certain sections of the desktop client had incorrectly rendered UI text on Macs with the M1 SoC. Fixed.
    • An issue caused the Server to not start on Raspberry Pi 3. Fixed.
    • The lens position and zoom level of fisheye cameras were not saved in the layout. Fixed.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
    • Added advanced PTZ support for Hikvision IPC6412LR-X5P, IPC6854SR-X38UP-VC, IPC6222E-X33UP, IPC6222EI-X22UP-C.
    • Fixed an RTP error that occurred with H.265-encoded primary streams on DW cameras.
    • Server did not use ONVIF to configure stream settings for Arecont Vision cameras from the Contera Panoramic series (AV08CPD-118, AV20CPD-118, AV8476DN, and AV20476DN) and DUO series (AV4856DN, AV10856DN, and AV16856DN). Fixed.
  • ++++++ 4.2 RELEASE NOTES ++++++
  • OPERATING SYSTEMS/PLATFORMS
    • Windows 7 compatibility support ended.
    • Windows 2008 R2 compatibility support ended.
    • Added support for MacOS 11 in the desktop client.
  • IMPROVEMENTS:
    • Added Catalan language.
    • The maximum value for pre-recording and post-recording actions in camera recording events is now 600 seconds.
    • Export dialog now uses short date and time format by default.
    • Update packages are now validated before installing to prevent malware injection.
    • Camera name and export time can now be overlayed onto the footage in the Export Dialog.
    • Camera name can now be overlayed when capturing a screenshot.
    • Exported videos in h.264 format can now be played back in Windows Media Player.
    • Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
    • The way that ROI data is overlaid on cameras was divided into two groups: ”Show Region of Interest” and ”Objects”. “Show Region of Interest” makes ROI objects visible on cameras without object tracking support if the ”Display on Video” option is enabled in Camera Settings > Plugins. “Show objects” makes ROI objects and camera analytics objects visible only on cameras that support object tracking.
    • Removed the limitation on Video Wall licenses that prevented more than one active direct control session at a time.
  • ANALYTICS IMPROVEMENTS:
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Dahua analytics plugin:
      • Models:
        • All models with supported analytics.
      • Analytics Features:
        • Added short object tracking for objects in events. The track duration is about 500ms.
        • Fast-moving
        • Parking detection
        • Loitering,
        • People gathering
        • Abandoned object detection(Left object detection)
        • Intrusion detection
        • Missing object detection
        • Tripwire detection (Cross line detection)
        • Queue size detection
        • In-area people counting
        • People flow counting
    • “Motion+: Detect any motion event” was removed from the list for Bosch analytics.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
    • New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
    • Encoders added to the analog list:
      • Axis q7414x
      • Abus HDCC90011
      • Advidia VP-16-V3
      • Alibi ALI-HVR5016H
      • Alumia QSS301-08-P8
      • Amcrest NV4108E-HS, AMDV8M16-H5, nv4108e-hs, AMDV10818-H5
      • Bolid RGI-1622P16
      • Bosch Videojet Multi4000
      • CBC Ganz ZN-AIBOX16
      • Dahua DH-XVR5116HE-X, DH-NVR6064, X72A3A4, dhi-nvr5208x, dhi-nvr2116x, dhi-nvr5224x, dh-nvr5432x, n41b1p2, , X51B1E, X51A3E2, C52A2N
      • Dcode DEN408-64R-B
      • EPCOM EV-5008TURBOUS, EV-1016-TURBOX
      • FLIR DNR832, DNR716
      • Grundig GRN-R2108P
      • Haitai X Mtum Co IPXM4
      • Hikvision DS-7104x, DS-7616NI-I2/16P, DS-7216HUHI-F2/N, DS-7216HWIx, DS-7216HGHIx, DS-7308HQHI-SH
      • Hunt CCTV HWS-04AD, CCTV HAR526-32, HNR32P6-16, HAR326-4, HNR32P6-16
      • InVid UN1B-16X16
      • Lorex LNR608, LNR616, N881A3
      • LunaIP L-IPR-5216-EP-4K
      • Luxon HYB163TB
      • LTS LTN8932H-P16, LTD8304K-ET, LTN8716K-P16, LTN8716T-HT
      • Nelly’s Security NSDV-208UK
      • Optio OPDVR04
      • Osiris OS-NVR8M8P-4H1-4K
      • Panasonic k-nl404k, K-NL416K
      • RVi 1HDR08K, RVi-R08MA
      • Smartec STR-HD1625
      • SecurityTronix TVR-AR314-8
      • SpecoTVI-16CH-720P-4TB-NSP, OS103T
      • Tecsar Lead 4ch1h4poe-5-sm
      • ToughDog Security TDHDX161-4K-2T
      • Tyco TYCE4C
      • UniView NVR516-128
      • Visiotech XS-XVR6116-VS2
      • Vicon VLR-ENC-16-A
      • Winic AR326-4
      • X2-CCTV-NVR-x
    • Advanced PTZ support:
      • Avigilon 2.0C-H4IRPTZ-DP30x
      • Advanced ptz mapping for DS-2DE5425IW-AE
      • Axis Q740x
      • Milesight MS-C2971x, MS-C5361x
      • Hikvision DS-2DP3236ZIXS, DS-2DF9C435IH
      • Uniview IPC6252SL-X33UP
    • Multi-sensor cameras:
      • Axis P3715PLVE
      • Avigilon 15C-H4A-3MH-270, 12W-H3-4MH-DP1-B
      • Dahua ipc-pdbw82041-b360
      • Digital Watchdog DWC-PVX16w2.
      • Digital Watchdog DWC-PVX16W*, DWC-PV2M4T, DWC-PB6M4T, DWC-PZ21M69T, DWC-PB2M4TIR
      • Hikvision DS-2PT5326IZ-DE, DS-2TD2617*
      • Hikvision DS-2CD6D52G0-IHS
      • I-View FE-6MIPS06-F01
      • Pelco IMM12018, IMM12027, IMM12036 (or Optera IMM12036?)
      • Secubest NVM2-A21
      • Secubest NVM5-520
      • Safire SF-IPPAN362HA-2Y
      • Sony SNC-WL862
      • Uniview IPC8542ER5-DUP
      • Vivotek VC8201*
    • INFRACHEN ZH-FS160 now supports signal input events.
    • Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
    • Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
    • D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
    • When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
    • Motion detection did not work for Axis M3007. Fixed.
    • VMS-20331:Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
    • Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
    • The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
    • The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
    • SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
    • Signal I/O support added for HIKVISION DS-2TD4237*.
    • The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
    • Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
    • Added I/O license support for AXIS A9188.
    • Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
    • Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
    • VIVOTEK FD9189, FD9380*, FD9388*, IT9389-HT,IB9391*, SD9362*, SD9366*, IB9387*, FD8369*,CC8370*, CC9381 failed to initialize correctly via ONVIF. Fixed.
    • Added support for Axis C1410 Network Mini Speaker.
    • Hikvision DS-2CD4A26FWD-IZHS8/P incorrectly showed support for Pan and Tilt, even though only Zoom is supported. Fixed.
    • FPS limitation for Axis Q1645 was increased to 120 fps.
  • ANALYTICS BUG FIXES:
    • VMS-20948:Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed ”Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
    • VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
    • Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
    • Notification ”Alarm detection has ended” for Dahua analytics cameras appeared only when the server stopped. Fixed.
    • Only the first 5 rules for Dahua analytics worked. Fixed.
    • Cropped thumbnails of analytics objects were shown in the Notification Panel if ”Disable secondary stream” was enabled. Fixed.
    • Analytics events were not available for VIVOTEK cameras with firmware 2.2002.23.01. Fixed.
  • BUG FIXES:
    • In some cases, Cloud system tiles on the Welcome Screen would intermittently switch between an offline and online status. Fixed.
    • Live view in Web Admin did not work in Safari. Fixed.
    • CPU usage significantly increased on AWS EC2 instances with ELB enabled and TCP/UDP port 7001 configured as a listener. Fixed.
    • Unable to view live camera streams or archived video on the Cloud client due to an ”Internal Server Error 500”. Fixed.
    • The ”On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
    • The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
    • PTZ tours would stop when activated on more than one camera at a time. Fixed.
    • Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
    • Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
    • The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
    • The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports even if the camera does not support audio at all. Fixed.
    • The ”Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
    • Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
    • The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
    • Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
    • On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
    • In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
    • Failover did not work with cameras that were manually added to the System. Fixed.
    • Auto-Discovery could not detect some ONVIF cameras. Fixed.
    • Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
    • The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
    • The ”Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
    • Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
    • Exported video duration was incorrect. Fixed.
    • PTZ tours were not displayed in the context menu. Fixed.
    • Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
    • On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
    • The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
    • Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
    • Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
    • The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
    • Screenshots from multisensor cameras included the image from only one sensor. Fixed.
    • Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
    • The option ”Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
    • Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
    • When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
    • The right side of the overlay in exported videos would get cut off. Fixed.
    • Storage credentials were not encrypted in the Server log. Fixed.
    • DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
    • Fixed an issue where some actions did not sync properly between Servers.
    • The ”Camera IP conflict” event did not work when triggered. Fixed.
    • Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name ”General”.
    • I/O module license failover did not work. Fixed.
    • Fixed an issue with the Chinese translation on the “Storage Management” and “Storage analysis” dialogs.
    • The Server tried to get storage space information about a DVD drive. Fixed.
    • Users without the appropriate permissions were able to access the Server Monitor. Fixed.
    • Sometimes the desktop client would crash when opening local files. Fixed.
    • Two systems with enabled secure connection could not be merged in web admin. Fixed.
    • Fixed several server and desktop client crashes.
  • API/SDK CHANGES/FIXES
    • Added an option for users to change bounding box colors for some analytics objects in compatible Plugins.
    • The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
    • Added new URL parameters for exporting over the /media method.
    • RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
    • A new web browser session identifier will be generated every time before the session is established.
    • SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
    • Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.
    • Added new URL parameters to the /media method: stream, duration, and mkv.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
    • Hanwha analytics plugin improvements and fixes:
      • Added support for Box Temperature Detection for Hanwha thermal cameras.
      • Added a possibility to choose a face bounding box color for Mask tracking.
      • The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
      • Fixed a memory leak caused by malformed object tracking metadata from a Hanwha camera, which consumed all available RAM and froze the Server.
      • Analytics events for PND-A9081RV displayed a thumbnail of the entire camera view instead of best shot.Fixed.
      • Sometimes updated ROI settings did not apply when saved.Fixed.
    • Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
    • The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.
  • TESTED OPERATING SYSTEMS:
    • Windows 7, 8, 8.1, 10/Enterprise, 2008 R2, 2012, 2012 R2, 2016 v1607, 2019
    • Ubuntu LTS: 16.04, 18.04, 20.04
    • MacOS 10.14: “Mojave”, 10.15 “Catalina”, 11.0
    • Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch)).
  • KNOWN LIMITATIONS:
    • Due to a firmware issue affecting Bosch cameras, sometimes events are triggered but not shown in the desktop client.
    • Hardware decoding doesn’t work on PC-based Ubuntu systems.
    • Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
    • ”Error 404. Cannot find the page. Check the URL and try again” shows up on the Web Page tab in Camera Settings for Hanwha NVRs. The web page will be correctly displayed after users click “OK”.

In-Client Upgrade:

Build Number: 32841
Password: 1qrqud

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK


4.2.0.32659 Video Management System
PUBLISHED 17 Mar 2021

Release Notes:

  • OPERATING SYSTEMS/PLATFORMS
    • Windows 7 compatibility support ended.
    • Windows 2008 R2 compatibility support ended.
    • Added support for MacOS 11 in the desktop client.
  • IMPROVEMENTS:
    • Added Catalan language.
    • The maximum value for pre-recording and post-recording actions in camera recording events is now 600 seconds.
    • Export dialog now uses short date and time format by default.
    • Update packages are now validated before installing to prevent malware injection.
    • Camera name and export time can now be overlayed onto the footage in the Export Dialog.
    • Camera name can now be overlayed when capturing a screenshot.
    • Exported videos in h.264 format can now be played back in Windows Media Player.
    • Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
    • The way that ROI data is overlaid on cameras was divided into two groups: ”Show Region of Interest” and ”Objects”. “Show Region of Interest” makes ROI objects visible on cameras without object tracking support if the ”Display on Video” option is enabled in Camera Settings > Plugins. “Show objects” makes ROI objects and camera analytics objects visible only on cameras that support object tracking.
    • Removed the limitation on Video Wall licenses that prevented more than one active direct control session at a time.
  • ANALYTICS IMPROVEMENTS:
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Dahua analytics plugin:
      • Models:
        • All models with supported analytics.
      • Analytics Features:
        • Added short object tracking for objects in events. The track duration is about 500ms.
        • Fast-moving
        • Parking detection
        • Loitering,
        • People gathering
        • Abandoned object detection(Left object detection)
        • Intrusion detection
        • Missing object detection
        • Tripwire detection (Cross line detection)
        • Queue size detection
        • In-area people counting
        • People flow counting
    • “Motion+: Detect any motion event” was removed from the list for Bosch analytics.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
    • New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
    • Encoders added to the analog list:
      • Axis q7414x
      • Abus HDCC90011
      • Advidia VP-16-V3
      • Alibi ALI-HVR5016H
      • Alumia QSS301-08-P8
      • Amcrest NV4108E-HS, AMDV8M16-H5, nv4108e-hs, AMDV10818-H5
      • Bolid RGI-1622P16
      • Bosch Videojet Multi4000
      • CBC Ganz ZN-AIBOX16
      • Dahua DH-XVR5116HE-X, DH-NVR6064, X72A3A4, dhi-nvr5208x, dhi-nvr2116x, dhi-nvr5224x, dh-nvr5432x, n41b1p2, , X51B1E, X51A3E2, C52A2N
      • Dcode DEN408-64R-B
      • EPCOM EV-5008TURBOUS, EV-1016-TURBOX
      • FLIR DNR832, DNR716
      • Grundig GRN-R2108P
      • Haitai X Mtum Co IPXM4
      • Hikvision DS-7104x, DS-7616NI-I2/16P, DS-7216HUHI-F2/N, DS-7216HWIx, DS-7216HGHIx, DS-7308HQHI-SH
      • Hunt CCTV HWS-04AD, CCTV HAR526-32, HNR32P6-16, HAR326-4, HNR32P6-16
      • InVid UN1B-16X16
      • Lorex LNR608, LNR616, N881A3
      • LunaIP L-IPR-5216-EP-4K
      • Luxon HYB163TB
      • LTS LTN8932H-P16, LTD8304K-ET, LTN8716K-P16, LTN8716T-HT
      • Nelly’s Security NSDV-208UK
      • Optio OPDVR04
      • Osiris OS-NVR8M8P-4H1-4K
      • Panasonic k-nl404k, K-NL416K
      • RVi 1HDR08K, RVi-R08MA
      • Smartec STR-HD1625
      • SecurityTronix TVR-AR314-8
      • SpecoTVI-16CH-720P-4TB-NSP, OS103T
      • Tecsar Lead 4ch1h4poe-5-sm
      • ToughDog Security TDHDX161-4K-2T
      • Tyco TYCE4C
      • UniView NVR516-128
      • Visiotech XS-XVR6116-VS2
      • Vicon VLR-ENC-16-A
      • Winic AR326-4
      • X2-CCTV-NVR-x
    • Advanced PTZ support:
      • Avigilon 2.0C-H4IRPTZ-DP30x
      • Advanced ptz mapping for DS-2DE5425IW-AE
      • Axis Q740x
      • Milesight MS-C2971x, MS-C5361x
      • Hikvision DS-2DP3236ZIXS, DS-2DF9C435IH
      • Uniview IPC6252SL-X33UP
    • Multi-sensor cameras:
      • Axis P3715PLVE
      • Avigilon 15C-H4A-3MH-270, 12W-H3-4MH-DP1-B
      • Dahua ipc-pdbw82041-b360
      • Digital Watchdog DWC-PVX16w2.
      • Digital Watchdog DWC-PVX16W*, DWC-PV2M4T, DWC-PB6M4T, DWC-PZ21M69T, DWC-PB2M4TIR
      • Hikvision DS-2PT5326IZ-DE, DS-2TD2617*
      • Hikvision DS-2CD6D52G0-IHS
      • I-View FE-6MIPS06-F01
      • Pelco IMM12018, IMM12027, IMM12036 (or Optera IMM12036?)
      • Secubest NVM2-A21
      • Secubest NVM5-520
      • Safire SF-IPPAN362HA-2Y
      • Sony SNC-WL862
      • Uniview IPC8542ER5-DUP
      • Vivotek VC8201*
    • INFRACHEN ZH-FS160 now supports signal input events.
    • Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
    • Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
    • D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
    • When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
    • Motion detection did not work for Axis M3007. Fixed.
    • VMS-20331:Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
    • Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
    • The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
    • The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
    • SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
    • Signal I/O support added for HIKVISION DS-2TD4237*.
    • The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
    • Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
    • Added I/O license support for AXIS A9188.
    • Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
    • Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
    • VIVOTEK FD9189, FD9380*, FD9388*, IT9389-HT,IB9391*, SD9362*, SD9366*, IB9387*, FD8369*,CC8370*, CC9381 failed to initialize correctly via ONVIF. Fixed.
    • Added support for Axis C1410 Network Mini Speaker.
    • Hikvision DS-2CD4A26FWD-IZHS8/P incorrectly showed support for Pan and Tilt, even though only Zoom is supported. Fixed.
    • FPS limitation for Axis Q1645 was increased to 120 fps.
  • ANALYTICS BUG FIXES:
    • VMS-20948:Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed ”Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
    • VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
    • Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
    • Notification ”Alarm detection has ended” for Dahua analytics cameras appeared only when the server stopped. Fixed.
    • Only the first 5 rules for Dahua analytics worked. Fixed.
    • Cropped thumbnails of analytics objects were shown in the Notification Panel if ”Disable secondary stream” was enabled. Fixed.
    • Analytics events were not available for VIVOTEK cameras with firmware 2.2002.23.01. Fixed.
  • BUG FIXES:
    • In some cases, Cloud system tiles on the Welcome Screen would intermittently switch between an offline and online status. Fixed.
    • Live view in Web Admin did not work in Safari. Fixed.
    • CPU usage significantly increased on AWS EC2 instances with ELB enabled and TCP/UDP port 7001 configured as a listener. Fixed.
    • Unable to view live camera streams or archived video on the Cloud client due to an ”Internal Server Error 500”. Fixed.
    • The ”On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
    • The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
    • PTZ tours would stop when activated on more than one camera at a time. Fixed.
    • Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
    • Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
    • The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
    • The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports even if the camera does not support audio at all. Fixed.
    • The ”Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
    • Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
    • The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
    • Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
    • On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
    • In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
    • Failover did not work with cameras that were manually added to the System. Fixed.
    • Auto-Discovery could not detect some ONVIF cameras. Fixed.
    • Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
    • The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
    • The ”Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
    • Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
    • Exported video duration was incorrect. Fixed.
    • PTZ tours were not displayed in the context menu. Fixed.
    • Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
    • On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
    • The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
    • Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
    • Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
    • The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
    • Screenshots from multisensor cameras included the image from only one sensor. Fixed.
    • Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
    • The option ”Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
    • Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
    • When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
    • The right side of the overlay in exported videos would get cut off. Fixed.
    • Storage credentials were not encrypted in the Server log. Fixed.
    • DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
    • Fixed an issue where some actions did not sync properly between Servers.
    • The ”Camera IP conflict” event did not work when triggered. Fixed.
    • Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name ”General”.
    • I/O module license failover did not work. Fixed.
    • Fixed an issue with the Chinese translation on the “Storage Management” and “Storage analysis” dialogs.
    • The Server tried to get storage space information about a DVD drive. Fixed.
    • Users without the appropriate permissions were able to access the Server Monitor. Fixed.
    • Sometimes the desktop client would crash when opening local files. Fixed.
    • Two systems with enabled secure connection could not be merged in web admin. Fixed.
    • Fixed several server and desktop client crashes.
  • API/SDK CHANGES/FIXES
    • Added an option for users to change bounding box colors for some analytics objects in compatible Plugins.
    • The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
    • Added new URL parameters for exporting over the /media method.
    • RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
    • A new web browser session identifier will be generated every time before the session is established.
    • SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
    • Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.
    • Added new URL parameters to the /media method: stream, duration, and mkv.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
    • Hanwha analytics plugin improvements and fixes:
      • Added support for Box Temperature Detection for Hanwha thermal cameras.
      • Added a possibility to choose a face bounding box color for Mask tracking.
      • The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
      • Fixed a memory leak caused by malformed object tracking metadata from a Hanwha camera, which consumed all available RAM and froze the Server.
      • Analytics events for PND-A9081RV displayed a thumbnail of the entire camera view instead of best shot.Fixed.
      • Sometimes updated ROI settings did not apply when saved.Fixed.
    • Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
    • The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.
  • TESTED OPERATING SYSTEMS:
    • Windows 7, 8, 8.1, 10/Enterprise, 2008 R2, 2012, 2012 R2, 2016 v1607, 2019
    • Ubuntu LTS: 16.04, 18.04, 20.04
    • MacOS 10.14: “Mojave”, 10.15 “Catalina”, 11.0
    • Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch)).
  • KNOWN LIMITATIONS:
    • Due to a firmware issue affecting Bosch cameras, sometimes events are triggered but not shown in the desktop client.
    • Hardware decoding doesn’t work on PC-based Ubuntu systems.
    • Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
    • ”Error 404. Cannot find the page. Check the URL and try again” shows up on the Web Page tab in Camera Settings for Hanwha NVRs. The web page will be correctly displayed after users click “OK”.

In-Client Upgrade:

Build Number: 32659
Password: 5nu397

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

20.4.32276 Mobile Client
PUBLISHED 19 Dec 2020

Release Notes:

  • NEW SUPPORTED OS:
    • Android 11
    • iOS 14
    • iPadOS 14
  • BUG FIXES:
    • UI/UX fixes.
    • Improved Cloud connectivity within different mobile networks.
    • All characters were displayed as capital letters in Oxygen OS. Fixed.
    • Mobile client did not connect to Server if it was opened from Cloud Portal by clicking the ”Open in Nx Witness” button. Fixed.
    • Sometimes push notifications opened the mobile client with a camera list instead of the associated camera. Fixed.
    • Mobile clients could not properly reconnect to Server if a user switched between apps. Fixed.
    • Mobile client crashed after a long idle time. Fixed.
    • Mobile client on iPad Pro crashed while connecting to a system with more than 30 cameras. Fixed.
  • TESTED OS:
    • Android 8,9,10,11
    • iOS 12,13,14
    • iPadOS 13,14

In-Client Upgrade:

Build Number: 32276
Password: tn8i9d

Download Links:

 IOS
 ANDROID

4.1.0.31948 Video Management System
PUBLISHED 14 Oct 2020

Release Notes:

  • IMPORTANT
    • The below build is a Patch. It has not been fully tested and may contain certain issues.
  • NEW FEATURES
    • Redesigned PTZ controls – PTZ control have been redesigned for improved UX. To enable the new PTZ user interface go to Local Settings in the Desktop Client and uncheck the ”Show aim overlay for PTZ cameras” checkbox.
    • Intel® Quick Sync Video – Intel® Quick Sync Video uses the dedicated media processing capabilities of Intel® Graphics Technology to decode and encode fast, enabling the processor to complete other tasks and improving system responsiveness. Vastly improves the ability of low power hardware (e.g. Intel Atom, Celeron) and the ability of the Desktop Client to decode very high resolution (e.g. 16 MP, 32MP) cameras and streams.
      • Go to Local Settings in the Desktop Client and check the “Use Hardware Video Decoding” checkbox to enable Intel Quick Sync Video.
      • “Use Hardware Video Decoding” is unchecked by default.
    • Fisheye lens projection options – Improve fisheye dewarping precision by selecting the most suitable lens projection type:
      • Equisolid
      • Equidistant
      • Stereographic.
  • ANALYTICS IMPROVEMENTS/FIXES
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Vivotek analytics plugin:
      • Models: See https://www.vivotek.com/learning/feature-article/24/smart-vca; as of this patch release, the available models consists of the following:
        • Fixed Dome Cameras: FD9165-HTx, FD9365-xHTVx, FD9391-EHTV, FD9187-Hx, FD9387-xHx,FD9189-Hx, FD9389-xHx, IT9389-Hx
        • Bullet Cameras: IB9365-xHTx, IB9391-EHT, IB9387-xHx, IB9389-xHx
        • 360° Cameras: FE9191, FE9391-EV, FE9382-EHV-v2
        • 180° Cameras: MS9321-EHV, MS9390-HV
        • Mobile Dome Cameras: MD9561-H, MD9581-H
      • Analytics Features:
        • Added ROI support and object tracking
        • Crowd detection
        • Intrusion detection
        • Line crossing
        • Loitering detection
        • Missing object
        • Running detection
        • Unattended object
        • Face detection (for some cameras, such as FD9165-HT)
      • Tested devices: FE9191, FD9165-HT
    • Hikvision Thermal Analytics plugin:
      • Models:
        • Hikvision Thermal cameras
      • Analytics Features:
        • Object tracking
        • Thermal alarm
        • Thermal pre-alarm
        • Thermal regions group
        • Thermal alarm for region 1/2/3/4
        • Thermal pre-alarm for region 1/2/3/4
      • Tested devices: DS-2TD1217B-6/PA (FW V5.5.24 build 200212), DS-2TD2117-3/V1 (FW V5.5.16 build 190429), DS-2TD1217-6/V1 (FW V5.5.18 build 191202).
    • Bosch analytics plugin:
      • Models:
        • All models with supported analytics.
      • Analytics Features:
        • Excessive brightness
        • IVA: Intrusion (one field). Object in field
        • IVA: Intrusion (two fields). Left to right
        • IVA: Intrusion (two fields). Right to left
        • IVA: TrafficIncidents. Dropped object
        • IVA: TrafficIncidents. Pedestrian
        • IVA: TrafficIncidents. Slow vehicle
        • IVA: TrafficIncidents. Stopped vehicle
        • IVA: TrafficIncidents. Wrong way
        • Insufficient brightness
        • MOTION+: Detect any motion
        • Motion detection
        • Object detection
        • Scene change.
    • Added analytics for Provision ISR cameras.
      • Models:
        • BX-341IPE
        • I4-340IPE-36, I4-340IPE-:VF, I6-340IPE-MVF
        • DAI-340IPE-28, DAI-340IPE-MVF
        • DI-340IPE-28, DI-340IPE-MVF
        • DMA-340IPE-28.
      • Analytics Features:
        • Motion Detection
        • Perimeter Intrusion
        • Line Crossing
        • Scene Change
        • Video Blur Detection
        • Abnormal color detection
        • Entering Object Detection
        • Leaving Object Detection
        • Line Crossing Object Counting.
    • Camera profile names did not show up correctly when configuring event rules for the AXIS Fence Guard plugin.
    • AXIS LPR analytics plugin events were not triggered. Fixed.
    • When an analytics plugin is enabled on a camera and its settings are saved, the changes/updated values are not reflected in the GUI after the plugin settings dialog is re-opened.
    • Detected objects had the wrong timestamps stored in the analytics DB.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Hikvision cameras supported: DS-2DE4425, DS-2DE4A320
    • New Axis Cameras supported: AXISP3715, AXISD201-S, AXISD101-S
    • New Arecont Vision Cameras supported: AV2756, AV12CPD
    • Encoders added to the analog list:
      • Dahua XVR5104x, DHI-NVR4208-8p-4ks2, DH-HCVR5216an-s3, x51a3e
      • Eneo XPM16
      • Geovision GV-VS2800, GV-VS2420, GV-VS21600
      • Hikvision DS-7216x
      • Siqura S-64 E
      • Truen co., ltd. TCS-3000
      • Bosch VIP X1 XF E, VIP X1 XF IVA
      • Cantek AR315-8
      • Digital Watchdog DW-ENHD16, DW-EN4K16
      • Etrovision Technology EV3151A
      • EZ-IP EZIP-NVR2A08HS-8P
      • Honeywell HEN1614, HEN161
      • LunaIP L-IPR-5216-EP-4K
      • Optio OPDVR04, OPDVR08, OPDVR16
      • Provision ISR DVS-IP5-4
      • Risco RVNVR080020A
      • UniView NVR304-32EP-B
      • Z3 Technology FSDI-DCK-10
    • Multi-Sensor cameras:
      • Hikvision DS-2PT5326x, DS-2PT3122x, DS-2CD6944G0-IHS
      • Dahua IPC-PDBW8802-A180
      • Mobotix S16A
    • Advanced PTZ Support for:
      • Dahua SD59430U-HNI
      • Digital Watchdog DWC-MPTZ336x, DWC-MPTZ830x
      • Hikvision DS-2DP1636ZIX-D/250, DS-2DF8425IXx, DS-2DE5174, DS-2DE4A225x
      • Panasonic WV-S6130
      • Milesight MS-C2942-RB
    • Hikvision fixes/improvements:
      • Hikvision DS-2CD7A26G0* now supports the signal input event.
      • Signal output did not work on Hikvision DS-7732NI-I4. Fixed.
      • Fixed an input signal problem on Hikvision DS-2TD2617B-6/PA.
      • Hikvision DS-2TD1217* incorrectly reported PTZ support. Fixed.
      • Fixed a streaming issue for HIKVISION DVR DS-9632NI-I8.
      • MP2L2 codec is now supported on Hikvision cameras.
      • Distorted audio on Hikvision DS-2CD4A26FWD-IZHS8/P when MPEG sampling rate was set to 44.1 kHz. Fixed.
      • Server failed to fetch the stream from Hikvision DVR DS-7216HUHI-K2. Fixed.
      • Only the first channel worked properly on Hikvision DS-7216HWI-SH/A after the discovery. Fixed.
      • The last two channels (15 & 16) of a Hikvision 16CH DVR (DS-7216HWI-SH/A) were showing an error. Fixed.
    • Hanwha XND-6080RV had the wrong stream settings while configuring via Onvif. Fixed.
    • Some camera models from Sony, Huawei, SMAX, Edimax, and A-MTK had configuration issues that caused the live stream to intermittently stop. Fixed.
    • The initialization time for some cameras has been improved.
    • Axis T8311 joystick would stop working after using 2Way audio on a PTZ camera. Fixed.
    • The incorrect stream resolution was displayed for the MIT Professional 2MP camera. Fixed.
    • Fixed an issue with 2-way audio for Uniview cameras.
    • Fixed an issue detecting the input signal for AMTK AH5583T.
  • IMPROVEMENTS
    • Only administrators can see servers in the Desktop Client “About” dialog.
    • Added the ability to playback audio from all devices on the scene in the Desktop Client.
    • The Server failed to retransmit video from certain UDP streams as RTSP streams. Fixed.
    • The Server could not store analytics data on some Ubuntu servers due to selecting partitions which it didn’t have write access to. If the Server does not have write access to a particular partition, it can no longer be selected to store analytics data.
    • ”Allow only secure connections” (HTTPS traffic only) is turned on by default.
    • The limitations for pre- and post-recording are changed in Camera Settings: 90s for pre-recording and 300s for post-recording.
    • The in-client web browser now saves user credentials between browser sessions.
    • Added TLS support for LDAP on Linux-based systems.
    • Hotkeys changes:
      • [+] [−] keys are no longer used to zoom in or out on the Layout.
      • Shift + arrow keys are now used to select a camera on the Layout.
    • C2P cameras now require one analog encoder license per channel.
  • BUG FIXES
    • The FPS of a live stream would drop if a third-party software used the RTSP API to pull the stream from the Server. Fixed.
    • A fix for the error “Storage Issue: Analytics storage DB error. Insufficient permissions on the mount point” was made available. Enable the “forceAnalyticsDbStoragePermissons” advanced option from the WebAdmin interface to apply the fix.
    • The Desktop Client would crash if a microphone was disconnected during a 2-way audio session. Fixed.
    • There was no option to disable audio on a camera when ”Allow System to optimize camera settings” was unchecked in System Administration. Fixed.
    • Fixed the GUI glitch that occurred when creating a new role in the User Roles dialog.
    • Adding a Virtual Camera and searching for a camera manually were not recorded in the Audit Trail. Fixed.
    • On Ubuntu, the scheduled backup didn’t start as expected if the VMS time was configured manually. Fixed.
    • Fixed an issue with WebAdmin and Cloud Portal availability for a system with 1000 cameras when accessed outside the network.
    • The overlay settings for Axis cameras in the ”Advanced” tab didn’t work without reopening the camera. Fixed.
    • The Server returned an invalid thumbnail for the streams with B-frames. Fixed.
    • In some rare instances the Server would freeze. Fixed.
    • No motion was detected on multi-sensor panoramic cameras when “Force motion detection for stream” was enabled and set to Primary and ”Disable secondary stream” was checked. Fixed.
    • “Restore from backup” was redesigned to be more straight-forward for Cloud-merged Systems.
    • The notification ”Storage is not configured” disappeared when the Desktop Client was restarted. Fixed.
    • Server did not destroy the DeviceAgent on camera disconnect. Fixed.
    • Server improperly returned 500 for the correct ec2/analyticsLookupObjectTracks request. Fixed.
    • Under certain rare circumstances the client could not connect to the server after upgrading from 3.2 to 4.1. Fixed.
    • Fixed a file handle leak on Windows servers.
    • Failed to export a local file to MP4 format. Fixed.
    • The Motion tab for ArecontVision 12186DN panoramic camera did not display a video stream on ARM servers. Fixed.
    • Virtual cameras created using video recordings from Android devices have an inaccurate timeline due to differences in timestamp and file creation on Android. Fixed.
    • The number of licenses in use would not display properly with French regional settings enabled in the Desktop Client. Fixed.
    • Fixed an issue where some versions of the Desktop Client were unable to perform an in-client update to another 4.1 build.
    • Fixed an issue where the URL format did not work properly when the timestamp parameter was used to access virtual cameras. The Desktop Client would open and play the archive from the beginning instead of the specified timestamp.
    • The Desktop Client stability improved.
    • Sometimes exported video would stutter during playback. Fixed.
    • Sometimes the navigation menu on the WebAdmin page would appear twice. Fixed.
  • API/SDK CHANGES/FIXES
    • Metadata SDK:
      • Added a method for plugins to get the Server’s built-in SDK version.
      • Performing a text search for object type in the Desktop Client led to analytics metadata not working properly during playback. Fixed.
      • Metadata was received from Stub Analytics Plugin only after Server restart. Fixed.
      • When a plugin is enabled on a camera, and its settings are saved by pressing the ”OK” button, settings values were not updated in GUI when the plugin setting dialog is being opened again. Fixed.
      • Stub Analytics Plugin: throwPluginDiagnosticEventsFromDeviceAgent setting was renamed to throwPluginDiagnosticEventsFromEngine.
      • Stub Analytics Plugin: Added the method serverSdkVersion() to IUtilityProvider. serverSdkVersion() passes information about the Server’s built-in SDK version to the plugin.
      • Stub Analytics Plugin: Analytics Events would sometimes not show a thumbnail in the Notifications Panel. Fixed.
    • API:
      • Fixed the API documentation for the getCamerasEx method. Removed the “cameraName” and “cameraId” fields.
      • /api/getEvents return codes updated.
      • The wrong parameter type was used for the logLevel field on the WebAdmin’s API testing tool page. Fixed.
      • Added preciseBounds parameter to /ec2/recordedTimePeriods. The time range bounds will match the start and end times of the requests.
      • RTSP Streaming parameters were missing from the Server API documentation. Fixed.
      • The licenseUsed value from ec2/getCamerasEx was innacurate for a recording camera on an active schedule. Fixed.
    • Fixed errors that occurred when running the public node.js examples.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • Hanwha Analytics Plugin improvements:
      • Best shot images in the right panel are now identical to the ones in the camera’s web interface.
      • Mask detection event added.
      • Added separate events for Object tracking type events (Face tracking, License Plate tracking, Person tracking, Vehicle tracking).
      • Description of the events is filled with the attributes’ names and their values.
      • Added a possibility to filter events by the attribute:value pair.
      • Fixed an issue in the Hanwha analytics description field.
      • Motion detection event was removed from the list.
      • Made it easier to read the descriptions of Analytics Events in the Notification Panel.
      • Hanwha Analytics Events displayed incorrect names for ROI lines and areas in the Notification Panel. Fixed.
      • Analytics Events from Hanwha PND-A9081RV were missing object attributes. Fixed.
    • Fixed a discrepancy between the Desktop Client and the camera’s web interface when the image mode is set to HLC on Hanwha cameras. The HLC level has been renamed from ‘Medium’ to ‘Middle’ in the Desktop Client.
    • Hanwha XND-6010 did not have audio in archived footage when the audio codec was set to G.726. Fixed.
    • Hanwha cameras were inaccessible from the Desktop Client if a password containing “%” was used. Fixed.
    • Level ‘Middle’ for BLC, WDR mode for Hanwha cameras couldn’t be applied via the Desktop Client. Fixed.
  • KNOWN ISSUES
    • Hardware decoding doesn’t work on Ubuntu.
    • Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
    • PTZ tours are not displayed in the context menu after the first login.

In-Client Upgrade:

Build Number: 31948
Password: 1d9x8j

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

20.3.31784 Mobile Client
PUBLISHED 15 Sep 2020

Release Notes:

  • BUG FIXES:
    • Fixed an issue with cloud connectivity in some mobile networks.
    • Fixed a client crash on iOS 14/iPadOS 14 when 2-way audio was enabled.

In-Client Upgrade:

Build Number: 31784
Password: 9fzlbm

Download Links:

 IOS
 ANDROID

4.1.0.31400 Video Management System
PUBLISHED 20 Jul 2020

Release Notes:

  • CRITICAL COMPATIBILITY NOTICE:
  • All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
  • BREAKING CHANGES
    • MacOS 10.11, 10.12, 10.13 support was dropped: Desktop Client will not work on those OS.
  • NEW FEATURES
    • Push Notifications (requires Mobile Client v20.1 or later):
      • Rules can be created in VMS to send Push Notifications to mobile devices.
      • Users can receive push notifications from multiple systems and turn on/off notifications for specific systems.
      • In order to receive Push Notifications, users must be logged into the Cloud in Mobile Client.
      • Users can create custom text for notifications in the Rules Engine via Desktop Client.
    • Health Monitoring – Available in the Server Web Admin interface and Cloud Portal, Health Monitoring provides administrators detailed information about a System’s health, including, but not limited to:
      • Alerts – automatically detected / identified problems with a System
      • System Info (# of servers, channels, storage located, users, and version)
      • Servers (storage detailed state, CPU usage, NICs state, hardware spec, etc.)
      • Cameras (online/offline state, resolution, fps, quality, firmware version, etc.)
      • Storage Locations (path, server, type, status, read/write rate, size, usage %)
      • Network Interfaces (name, server, state, IP address, I/O rates)
      • Desktop Clients connected to Servers.
    • New Embedded Browser – Desktop Client now uses a full-featured embedded Chromium browser (v.65.0.3325.230) to display web pages on layouts:
      • Download Files on Web-Page – the embedded browser in Desktop Client now supports downloading and saving files.
      • Cameras Web Page in Camera Settings Dialog – camera web pages can now be opened up in the Camera Settings dialog allowing users to configure/access camera web pages inside Desktop Client even when on a different Subnet (i.e., remote connections / outside the LAN / WAN). Server acts like an HTTP(s) proxy from cameras to Desktop Clients.
    • Video Wall Failover – If a Server with Video Wall licenses fails, the video wall continues working for 7 days. After that, it will be blocked with the error message ”Not enough licenses”.
    • Analytics Events Region of Interest (ROI) – Now it is possible to draw lines, boxes, polygons and more when configuring a video analytic from the Desktop Client (no need to go to the camera web page).
      • Currently supports Hanwha AI cameras using firmware version 1.41.xx or higher.
  • PLUGIN / METADATA SDK ENABLED FEATURES
    • Analytics Events Region of Interest (ROI):
      • Now it is possible to enable configuration of 3rd party video analytics and draw lines, boxes, polygons and more from the software (no need to go to the camera web page).
      • Minimum and maximum size of detected objects can be configured from the software.
      • ROI editor is available in the ”Camera settings” dialog and visualized on the video.
      • This feature is available for developers using the Metadata SDK.
  • IMPROVEMENTS
    • Best Server Selection (while connecting to a Cloud-connected Multi-Server System):
      • In prior releases, Desktop Client would connect to a random available server via Cloud. Now Cloud connections are routed through the Server with the best uplink.
      • Added the ability for users to specify the preferred Server for connections. The configured Desktop Client will attempt to connect to the preferred Server first, and if it is not reachable, it will detect and connect via the Server with the best uplink.
    • 2-way Audio API – Allows third-party web clients to send audio (from client microphone) to and get audio from cameras.
    • Added Time Zone option for Virtual Cameras – Time Zone can now be specified for virtual cameras. If ”Time Zone” is set to ”Auto”, then the time zone is defined by metadata or UTC if there’s no time zone specified in the file. If set to ”Client”, the Time Zone is defined by the desktop client.
    • Server Side Motion Detection improved – False positives detection introduced to increase accuracy of detected motion events (e.g., turning on/off lights or switching camera day/night mode are now likely to be ignored)
    • Additional action parameter placeholders for the ”Do HTTP request” action – Placeholders can be added to the HTTP POST request body to be automatically replaced by the corresponding values from Analytics Event parameters. This feature is only applicable to Analytics and Generic Events. Placeholders syntax:
      • {event.cameraId} – replaced by the camera ID (e.g., {{{ad1d1b6c-7013-0049-6fd4-ff15450e4716}}})
      • {event.cameraName} – replaced by the camera name (e.g., PND-9080R)
      • {event.eventType} – replaced by the event type (e.g., nx.stub.objectInTheArea or nx.stub.lineCrossing)
      • {event.eventName} – replaced by the event name (e.g., Object in the area or Line crossing)
      • {event.caption} – replaced by the caption (e.g., “Line crossing – impulse event (caption)”)
      • {event.description} – replaced by the description (e.g., ”Line crossing – impulse event (description)”).
    • Improved MacOS performance and introduced an experimental setting to limit frame rate and reduce CPU load (see Local Settings -> Advanced).
    • Improved cloud connectivity on certain network environments.
    • Added the ability to pin the Timeline in fullscreen mode:
      • When the Timeline is pinned it will remain fixed on the screen.
      • If the Timeline is pinned in fullscreen mode and the user leaves fullscreen it will be pinned for all cameras on the layout when the user returns to fullscreen mode.
    • Database backups are now categorized into the following types:
      • Created after system merge
      • Created after updates
      • Initiated via API
      • Scheduled.
    • ”Camera selection” dialog was optimized for a large systems.
    • Added text search in the ”Event log” dialog.
    • ”Global Notification Settings” button was removed from the ”Show Notification” action.
    • Added .mpegts files to the list of supported files in Desktop Client.
    • It is now possible to disable port 80 on firewalls completely and use port 443 for HTTPS connection.
    • Added the ability to search by object types in the Notification Panel. <param>: <value> returns object where <param> has <value>. For instance, if there are analytic plugins that recognize t-shirt color, gender, and glasses, it is possible to search for analytic events by “T-Shirt: White”, “Gender: Male”, “Glasses: True”.
    • The default playback state of a camera opened from the Notification Panel has changed. Now a camera remains on Pause once opened.
    • Users are now imported from LDAP with their Email addresses.
    • It is now possible to open multiple instances of the Desktop Client by double clicking on the desktop shortcut.
    • Added information about remaining license deactivations on ”License details” and ”Confirmation” dialog.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Supported Devices:
      • Arecont Vision AV20975x, AV12975x, AV12976x, AV10856x, AV8476x, AV5426x, AV5456x, AV20476x, AV4856x, AV5756x
      • AXIS C8033 Network Audio Bridge
      • Axis P1377, P1378, P3719, M1137, M3115, M3116, M3205, M3206, M1134, Q6074, Q9216, M3066, M3065, M3064, M3068, M3067, M3075, P5654, Q6010, P3925, 3935, D201-S, D101-A and other Axis camera models
      • Dahua DH-PSD81602P-A360
      • Entropix DSC-TVC-0200
      • ICRealtime ICIP-PANO-A007, ICIP-T802-I.
      • Network Digital Video B1210DM
      • Secula SCI-04DA01
      • Vitek VTC-TNB8X4MS
      • Vivotek ma9322
    • DW TVT In-Camera Analytics – tested with TD-9541E3 firmware 1.4-1514121:
      • Abnormal color detection
      • Line Crossing
      • Motion Detection
      • Perimeter Intrusion
      • Scene Change
      • Video Blur Detection
      • Entering Object Detection [exclusive]
      • Leaving Object Detection [exclusive]
    • DW MB9/MT9/MV9 series cameras:
      • Abnormal color detection
      • Line Crossing
      • Motion Detection
      • Perimeter Intrusion
      • Scene Change
      • Video Blur Detection
    • Dahua In-Camera Analytics – tested with Dahua IPC-HDW5442TM-AS with firmware 2.800.00000000.80R, build date 2019-09-02:
      • Parking detection
      • Rioter detection (People gathering detection)
      • Stay detection
      • Wander detection (Loitering detection)
      • Fast moving detection
    • Input/Output fixes:
      • ”HIKVISION DS-2CD2135FWDx, DS-2CD2955FWDx, DS-2CD2955FWDx, DS-2CD2742FWD-IZS
      • Hunt cameras
      • Tiandy cameras
      • Vista VK2-4MPXVRDIR28V12M
    • New Devices Supported with Analog Encoder License:
      • 3R Global IPM32R16P, XPM08, XPM16, IPM32R32P, ILT08R, IPM32R16P, IPM32R32P
      • 3R XST16, XPM4M32, XST08, IPM32r32p
      • 3xLOGIC V250-4-SMBK family
      • ACTi V31,
      • ActiveCam AC-HR-1116
      • Alibi ALI-QVR3004H, ALI-QVR3008H
      • Allnet all-cam2400-nvr-kit
      • Amcrest NV4108-HS, NV4432-HS
      • AvertX 438IR
      • Axis P7304, M7104, Q7424x, P8221,
      • Bosch VIP-X16x
      • Dahua XVR5116, DH/HCVR1604x, X51A2, DH-NVR616, DH-NVR4832-16P-4k, IPC-HUM8431-e1, DHI-NVR608-32-4KS2, DH-XVR5116HE-X, DHI-NVR5816-4KS2, DHI-HCVR72*AN-4M, DH-XVR5216AN-4KL-X, DHI-NVR616D-128-4KS2, ITSE0804-GN5B-D, N42B2P2, DH-NVR4208-8P-4K, DH-NVR4832-4K, DHI-NVR5216-4KS2, DHI-NVR5424x, DH-NVR608-32-4KS2, DHI-NVR5208-4KS2, DH-NVR5216-4K, DHI-NVR5432x, DHI-NVR608-64-4KS2, DHI-XVR5216A,
      • Dallmeier DVE-16
      • Digimerge DV916
      • Digital Watchdog DW-ENHD16, DW-EN4K16, STR-HD1625, VLR-ENC-16-A
      • Eclipse ESG-NVR32-8, ESG-NVR8P
      • EdgeHandler EHA200
      • ENS Security NVR302A-16-4KS2
      • Epcom EV1016HDX, EV1016TURBO, EV1004TURBO, S16TURBOX, S08-TURBO-X
      • Hikvision DS-7332HUHI-K4, DS-7732HUHI-K4, DS-7616NI-SP, DS-7732, DS-8116, DS-7204, DS-7208HQHI-SH, DS-7204HUHI-K1, DS-6704HWI, DS-7608NI. DS-7216x, DS-7316HQHI-F4/N, DS-7216HQHI-F2, DS-7208HGHI-SH, DS-7208HGHI-SH/A(B)
      • HiWatch DS-H208U
      • Honeywell HEN162x family, HRGX81
      • Hunt CCTV HAR314-4,
      • IC Realtime NVR7000K
      • Indigovision BX100
      • Intelbras HDCVI 1016, MHDX_3116
      • Interlogix TVE-420, TVE-820
      • InVidTech UD1B-16, UN1A-32×16
      • Lorex LNR608
      • LTS LTD8316K
      • March Networks Edge 16e
      • Merit LILIN VS212
      • NSS NVS-AH04
      • NVR2821-04009B
      • Ocean CCTV DR-TW1516E
      • Panasonic K-NL416K, WJ-GXE100
      • Pelco NET5501
      • RAS Security DVR08CVI-4K
      • RVi rvi-hdr08la-t, R16LA, 1HDR16K, IPN16/2-PRO-4K
      • Sampo DR-TW2516A
      • Siqura S-64 E V2, , S-64 E V2-XT
      • Space Technology ST_HDVR162PRO-D-V2
      • ToughDog Security TDHDX161-4K-2T
      • TVI ST-HDVR-161
      • Uniview NVR302-16Q, NVR301, NVR308-32E-B
      • Vip Vision NVR8PRO7, NVR16PRO7
      • Vista VIPER-HDAENC16
      • Winic NR32P6-16, Winic AR304-4
      • X-Security XS-XVR6116-VS2
    • Forced Onvif PTZ for:
      • Hikvision DS-2TD4237x, DS-2TD4136x, DS-2TD4166x, DS-MH6171Ix, DS-2DE4A225x, DS-2DE4A425x
    • Advanced PTZ support for:
      • Dahua DH-SD22204T-GN and DH-SD49225T-HN
      • DWC-MPTZ830X, DWC-MPTZ36x, DWC-MPTZ336x
      • GeoVision GV-SD3732-IR, GV-SD2722-IR
      • Hikvision DS-2DE4215IWx, DS-2DE4xAx215IWx, DS-2DE5330W-AE, DS-2DE4225W-DE, DS-2DE4Ax25IW, DS-2DF8836x, DS-2TD4166T-25, DS-2TD4237-25, DS-2DE4215IWx, DS-2DE4A215IWx, DS-2DE4A320x, DS-2DE4A225x, DS-2DE4A425x
      • IPC-B620H-Z
      • Milesight MS-C5361x, MS-C5341x, MS-C8241-X36RPB, MS-C2941-X30RPB, S-C2942-RB, MS-C8241-X36RPB, MS-C5361-EPB
      • Pelco P2230x-ESR, P2820-ESRx
      • Vivotek SD9374x
      • Fixed wrong mapping for GV-SD3732x, GV-SD2722x.
    • New Multi-Sensor Camera Support (Single License):
      • 3xLogic VX-8S-180-AWD
      • Avigilon 24C-H4A-3MH-270
      • Axis AXIS-P3719
      • Dahua IPC-HDBW4231F-E2-M12,
      • DW EN4K16
      • IC Realtime IPEL-M60F-IRW1
    • Other Specific Device Updates:
      • Axis C1004 E speaker did not work as expected. Fixed.
      • Axis Q3709x fixed.
      • ”Enable audio” was missed in ‘Camera Settings’ dialog for Axis IO module. Fixed.
      • Pelco cameras were unstable after upgrading from 3.2. Fixed.
      • AV20CPD-118 uses ONVIF.
      • Fixed autodiscovery for VIVOTEK SC8131.
      • Vivotek FD8162 dropped its resolution to very low value after reconnecting, Fixed.
      • Malformed packets in secondary streams from Uniview cameras caused Smart Motion Detection failures. Fixed.
      • FPS for secondary stream for Uniview IPC6322SR-X22P-C was not changed. Fixed.
      • Fixed audio support for ACTi A71.
      • Fixed an issue with Dahua N25BB5Z connection.
      • Fixed an issue with stream URL for multi-sensor Dahua cameras.
      • Analytics enabled for Dahua IPC-HDW4433x.
      • Fixed Dahua XVR5116HS DVR PTZ issue.
      • Fixed an issue with stream parameters on the ”Advanced” tab for Vivotek FD9187-HT.
      • Hikvision DS-2TD2636-10 was wrongly triggered by the output after it was opened in VMS. Fixed.
      • Hikvision analytics events (Line crossing, Intrusion) were triggered only once. Fixed.
      • ’Contract Violation’ messages appeared on Hikvision analytics events. Fixed.
      • DWC-PTZ30X stopped working after upgrading from 3.2 to 4.0. Fixed.
      • Stream profiles assignment fixed for Entropix camera.
      • Hikvision DS-2TD1217 signal input was triggered but didn’t have any action in the VMS. Fixed.
      • VideoTec UCHD-30x-VT had interruptions while receiving RTP over multicast. Fixed.
      • Video stopped working on Vivotek FD8162 when RTP transport was changed to ”Multicast”. Fixed.
      • Fixed an issue with autodiscovery for DWC-PZV2M72T.
      • Fixed an issue with H.265 for TN-P6236W12.
      • Motion was continuously detected on DWC-PB6M4T with OSD enabled. Fixed.
  • BUG FIXES
    • Fixed client glitches with Intel HD 620 and 630.
    • Server Web Admin stopped working in Chrome 80. Fixed.
    • The video stream opened via media server API could not be closed if user permissions or password were changed. Fixed.
    • Analytics metadata was saved for a part without an archive. Fixed.
    • The ”Confirm storage location for analytics” dialog could not be closed by the ”X” button on Desktop Client on Mac. Fixed.
    • Next/Previous frame navigation didn’t work after reverse playback. Fixed.
    • 2-Way audio did not work, if the client was connected to a server running on a DW Edge camera. Fixed.
    • Fixed an incorrect message if an update from the file was canceled.
    • Desktop client tried to auto-reconnect to the system after it was disconnected from Cloud. Fixed.
    • It was impossible to update the System from file if Desktop Client was the only component to be updated. Fixed.
    • Sometimes previews of the motion events on the right panel in Desktop Client on Mac displayed with incorrect aspect ratio. Fixed.
    • Norsk and Dutch (Belgium) were missing on the server’s web page. Fixed.
    • ”Play sound” with a custom audio file didn’t work. Fixed.
    • Desktop Client on Mac could freeze after multiple transitions to fullscreen mode. Fixed.
    • Video Wall could hang in fullscreen mode. Fixed.
    • Virtual Camera was played back incorrectly on the Android client. Fixed.
    • Virtual Camera could not display files recorded by iPhones on the Timeline properly. Fixed.
    • Desktop Client could sometimes crash if the ”Connect to Server” dialog or webpage on Scene was closed. Fixed.
    • If trying to view the archive from a camera and switch to another layout and back, the playback position switched to live. Fixed.
    • The same logicalID could be specified for different layouts. Fixed.
    • The Desktop Client worked very slowly during export. Fixed
    • Some RTSP links didn’t work if added manually, but worked in VLC. Fixed.
    • ”Native” ONVIF PTZ presets didn’t work if the preset name in VMS contained some native symbols (like Japanese or Chinese strokes). Fixed.
    • In rare environments under certain circumstances, the motion detection database may have been corrupted after upgrading to 4.0 which prevented the smart search feature from working correctly. Fixed.
    • On certain ARM devices (Socionext) Hardware ID was calculated incorrectly causing random server issues. Fixed.
    • Cloud accounts could not be saved in the ”Edit tile” dialog. Fixed.
    • Server cloud address was displayed on ”Add device” dialog. Fixed.
    • Fixed high CPU usage of minimized Desktop Client with one monitor configuration.
    • If there were zoom windows on a camera, the “Set to Fullscreen” action would be incorrectly applied to a zoom window instead of the main camera. Fixed.
    • Fixed a playback bug which occurred after a zoom window was repeatedly opened and closed several times.
    • Server assigned identical camera IDs for different onboard USB cameras from laptops with the same model and manufacturer. Fixed.
    • USB webcams were not successfully auto-discovered on servers installed on Ubuntu. Fixed.
    • Fixed unsupported audio on USB cameras on Ubuntu.
    • After upgrading to v4.0 “Min days” retention rules could not be set to more than 30 days. Fixed.
    • Video Wall mode was affected by the ”Limit session duration” option in the Desktop Client, as a result, it limited Video Wall sessions. Fixed.
    • Under complex LDAP configuration conditions Server could fetch less users than expected. Fixed.
    • Sometimes the webcam light of the laptop turned on even if the camera was not recording and was not opened on Scene. Fixed.
    • ”Enable audio” is disabled now when ”Allow System to optimize camera settings” or ”Keep camera settings” is set.
    • The Desktop Client could freeze if a layout was configured to open automatically on startup. Fixed
    • There were no thumbnails in notification for a generic event with 2 cameras. Fixed.
    • When primary and secondary streams had different codecs, any gaps in the primary stream when using default export would cause the exported video to be non-playable. Fixed.
    • Using the CLI to start the Desktop Client and display a specific layout didn’t work if the layout name contained certain symbols (i.e., Japanese strokes). Fixed.
    • Fixed an issue with incorrect default language in the installer.
    • Fixed an issue with incorrect default language on Setup Wizard.
    • In-client context help menu fixes:
      • Context help for Camera Settings and Server Settings dialogs failed to open up. Fixed.
      • Context help for ”Allow only secure connections” on “System administration” dialog led to an incorrect page. Fixed.
    • The “–layout-name” CLI parameter did not work for Application Launcher. Fixed.
    • Fixed occasional crash of Desktop Client in video wall mode.
    • Fixed occasional crash of Desktop Client while running showreel.
    • Server could crash when VMAX was removed from the resource tree. Fixed.
    • Export from cameras with resolution 8MP and greater when transcoding was applied resulted in a broken output file. Fixed.
    • SMB drive was displayed as ”unknown” or as an incorrect storage type. Fixed.
    • Storage locations with Cyrillic symbols in the path were not discovered. Fixed.
    • Motion sensitivity did not work for some stitched panorama cameras. Fixed.
    • In certain environments, Server stopped detecting motion after some time running and occurs until the server is restarted. Fixed.
    • It was not possible to change reserved space for network drives that required credentials. Fixed.
    • Bookmarks triggered by instant generic events were not created even if post- and pre-recording was set. Fixed.
    • Fixed different media server and client crashes.
    • Fixed some translation issues.
    • Fixed some vulnerabilities.
    • Minor UX and UI improvements and fixes.
  • API/SDK CHANGES/FIXES
    • SDK Plugin Fixes:
      • Axis camera plugin from camera SDK didn’t work on Windows. Fixed.
      • FTP storage plugin sample from storage SDK didn’t work. Fixed.
      • Image library plugin fixed.
    • Fixed a memory leak that occured when using an API method to get MPEG-TS streams with transcoding.
    • Fixed a possible memory leak when using HTTP Streaming API methods.
    • Added licensing-related RestAPI methods to API documentation.
    • Video archive downloaded using /media/cameraid.mpegts method with transcoding could not be played back. Fixed.
    • When trying to request video streams through API (using any /media/ call), the maxWebMTranscoders parameter limited the sessions to 2 even if transcoding was not involved. Now the number of the non-transcoded streams that can be requested through API is unlimited and transcoded-ones are limited to maxWebMTranscoders (2 by default).
    • API tool in webadmin now works without authentication. The ”Test method” button is hidden and fields for post requests are disabled for non-authorized users.
    • The ec2/analyticsLookupObjectTracks request could hang at certain environments. Fixed.
    • /api/gettime is now deprecated.
    • Added the “accurate_seek” url parameter for HTTP Streaming to avoid time difference.
    • SDKs: improvements to readme.md and Doxygen documentation.
    • SDKs: improvements to sample building scripts:
    • Implemented command-line help (`-h`|`–help`|`/?`).
    • Added the `–release` command-line arg to build Release configuration instead of Debug.
    • For MSVC, removed forcing the old MSVC2015 compiler (v140 toolset).
    • Testcamera improvements:
      • Fixed incorrect syntax in testcamera command help text.
      • Added multi-track streaming support for testcamera.
      • Added the “–max-file-size-megabytes” parameter to increase the portion of a video file being streamed (was 100 MB).
      • Added parameter to specify testcamera mac address (–mac-address-prefix).
    • API documentation improved:
      • /ec2/saveCameraUserAttributesList and /ec2/saveCameraUserAttributes: Mark licenseUsed as unused.
      • /ec2/cameraThumbnail: Fixed incorrect params description: change `roundMethod` to `method`.
      • Added documentation for /ec2/dumpDatabase and /ec2/restoreDatabase.
      • The api/ptz method documentation was updated.
      • Added systemSettings to documentation for api/setupCloudSystem, api/setupLocalSystem.
      • Description for api/storageStatus and /api/cookeAuthentication methods were updated.
      • Added description for ‘tag’ parameter for /ec2/bookmarks/add.
      • Removed /api/executeEventAction from documentation.
      • Added licensing-related Server API methods to the API documentation.
      • Improved the description of multiple ”tag” parameters in our API documentation.
      • Added API methods for /api/downloads to the API documentation.
      • Added a missing parameter to the API documentation for /api/setupCloudSystem and /api/setupLocalSystem.
      • Server returned 500 and printed ERROR ASSERT on the ec2/saveUsers command without the “id” parameter. Documentation changed, the ””id”” parameter is described as mandatory for ””ec2/saveUsers”” now.”
    • Added string time format to the API documentation for /ec2/cameraThumbnail.
    • Added recordingecordQueueB and recordingecordQueueP values to /ec2/metrics/values и /api/metrics/values: dynamic buffering in bytes and per frame.
    • Added a parameter check for merge possibility without performing the actual merge.
    • Added an optional GET request parameter ”signature” to /media/<cameraId>.mp4. It enables the signature in exported mp4. By default, it’s disabled.
  • ANALYTICS PLUGIN SETTINGS IMPROVEMENTS/FIXES
    • Added the possibility to choose a specific video stream that will be used for analysis by a video analytics plugin. This option can be disabled in plugin manifest (hideStreamSelection).
    • Analytics plugin manifest now supports sections.
    • Simultaneous operation of multiple Device Agents running on the same camera is now supported.
    • Analytics settings were changed to their default value after a plugin upgrade. Fixed.
    • Objects boxes were not shown on the camera if it was not re-opened on a layout after enabling the metadata plugin for the first time. Fixed.
    • If Default Rotation was changed for a camera after analytics objects detection, the thumbnails of those objects were displayed incorrectly on the Right Panel. Fixed.
    • Incorrect analytic chunks appeared on the Timeline when Text Search and Area Selection filters were used together. Fixed.
    • Analytic objects were not shown in Desktop Client when it was connected to the multi-server system where some of the servers did not have the analytics plugin installed. Fixed.
    • Sometimes playback with analytic chunks stopped working. Fixed.
    • Improved analytics object search in the area.
    • Sample Analytics Plugin is included in Metadata SDK.
    • Improved the description of the method “executeAction” in the Metadata SDK documentation.
    • Long plugin options descriptions did not fit into the text control. Fixed.
    • Added the Refresh button to update the settings for the selected plug-in from camera.
    • Added a new control ”Column”. It acts like GroupBox but does not have any frame.
    • Added a new control ”SwitchButton”.
    • Fixed an issue with bounding boxes of zero size. Metadata objects with bounding boxes of zero size are now correctly shown in the camera item: their text attributes are shown. Such objects can be used to visualize some data calculated by the plugin, e.g., the amount of people appearing in a field of view of a camera.
    • Servers on Linux machines with Analytics Plugins (built via the SDK) enabled would crash while being shut down. Fixed.
  • NEW OPERATING SYSTEMS/PLATFORMS
    • Added support for Windows Server 2019.
    • Added support for Ubuntu 20.04.
  • TESTED OPERATING SYSTEMS
    • Windows 7, 8, 8.1, 10/Enterprise, 2008 R2, 2012, 2012 R2, 2016 v1607, 2019
    • Ubuntu LTS: 16.04, 18.04, 20.04
    • MacOS 10.14: “Mojave”, 10.15 “Catalina”
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (Stretch)).
  • KNOWN ISSUES/LIMITATIONS
    • We support only camera web-pages that work in Chrome.
    • Health monitoring: all metrics and alerts, including aggregated alerts, are erased after the server has been restarted.
    • Linux Server fails to record analytics metadata to NTFS drives.
    • Push notifications: sometimes, there are no thumbnails when the associated camera is not recording.
    • In rare situations on MacOS, 2-way audio doesn’t work after upgrading from 4.0 and previous versions. Reinstall the Desktop client to work around this issue.
    • USB camera is duplicated as an old offline camera and a new online camera after upgrading from 4.0 to 4.1.
    • ”Line Crossing Object Counting” doesn’t work for DW TD-9541E3 (camera issue).
    • Analytics DB from 4.0 is partially incompatible with the 4.1 release: a search for metadata objects in a selected area will not work for the objects that were recorded before the update to 4.1 and such objects will not be shown on the image.
    • Bounding boxes for analytics objects are not shown in Desktop Client when performing text search by an object type.
    • If the “Enabled” checkbox is not set on Hanwha AI cameras, the line crossing direction will be reset after saving.
    • Hanwha ROI:
      • The objects in the Notification Panel may be linked to wrong archive chunks in the timeline.
      • The border frames of objects may disappear sometimes.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • A new Hanwha NVR which is based on Ubuntu 18.04 (tested with 8 channels and 16 channels NVR with kernel 4.15.18):
      • Integration with Recording, Alarm out and PoE over budget LEDs, input/output alarms
      • Added a new action ”Make buzzer sound”
      • Added a new event ”PoE Over Budget” – event is triggered when current consumption exceeds the predefined limits
      • Added a new event ”Fan Error”
      • Added the ”Power consumption monitoring and control” dialog in ”Server settings’.
    • Hanwha AI camera (tested with model PNO-A9081R and firmware 1.41.01_20200318_R342).
    • Autofocus icon did not appear if an NVR channel was opened on Scene and just changed the status from offline to online.Fixed.
    • If the ”Backup” media type was used for export from Hanwha NVRs, export from Hanwha SRN-4000 did not work. Fixed.
    • Operation type for IO sensors was changed when Hanwha NVR was added to the media server. Fixed.
    • Advanced PTZ didn’t work for Hanwha PTZ camera connected via Hanwha NVR. Fixed.
    • Fixed unexpected WAVE XRN encoder sensors change.

In-Client Upgrade:

Build Number: 31400
Password: hqsh7p

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

20.2.31377 Mobile Client
PUBLISHED 16 Jul 2020

Release Notes:

  • Fixed issue with the Apple app review.
  • CRITICAL COMPATIBILITY NOTICE:
    • All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
  • BREAKING CHANGES:
    • Android 5.x is no longer supported.
    • Compatibility with VMS 2.6 and less is not supported.
  • NEW FEATURES:
    • Push Notifications (for VMS v4.1 or later):
      • Rules can be created in VMS to send Push Notifications to mobile devices.
      • Users can receive push notifications from multiple systems, and turn on and off notifications for specific systems.
      • In order to receive Push Notifications users must be logged in to the Cloud through their mobile applications.
      • Notification texts can be configured in VMS.
  • IMPROVEMENTS:
    • Session duration is now limited. Mobile clients log out automatically when a session exceeds the specified duration.
    • Mobile Client pulls video from interfaces according to the ”Routing Management” table in VMS.
  • BUG FIXES:
    • UI/UX fixed and improvements.
    • Fixed crash when mobile client was minimized and closed by sliding while thumbnails were loading.
    • Fixed an issue with ”←” and ”→” buttons for the first and the last camera on the selected layout. Now it shows the first camera after the last on press on ”→” and last after the first on press on ”←”.
  • KNOWN ISSUES:
  • TESTED OS:
    • Android 7,8,9,10
    • iOS 11,12,13
    • iPadOS 13
  • INTERNAL:
    • Fixed a compatibility issue for Nutech customization with DW customization.

In-Client Upgrade:

Build Number: 31377
Password: lyuj0p

Download Links:

 IOS
 ANDROID

20.1.31254 Mobile Client
PUBLISHED 08 Jul 2020

Release Notes:

  • CRITICAL COMPATIBILITY NOTICE:
    • All users must update to the v20.1 Mobile release in order to be able to connect to a v4.1 System via the Mobile Client. Mobile Clients v19.6 or earlier will not be able to access Systems running v4.1 or later.
  • BREAKING CHANGES:
    • Android 5.x is no longer supported.
    • Compatibility with VMS 2.6 and less is not supported.
  • NEW FEATURES:
    • Push Notifications (for VMS v4.1 or later):
      • Rules can be created in VMS to send Push Notifications to mobile devices.
      • Users can receive push notifications from multiple systems, and turn on and off notifications for specific systems.
      • In order to receive Push Notifications users must be logged in to the Cloud through their mobile applications.
      • Notification texts can be configured in VMS.
  • IMPROVEMENTS:
    • Session duration is now limited. Mobile clients log out automatically when a session exceeds the specified duration.
    • Mobile Client pulls video from interfaces according to the ”Routing Management” table in VMS.
  • BUG FIXES:
    • UI/UX fixed and improvements.
    • Fixed crash when mobile client was minimized and closed by sliding while thumbnails were loading.
    • Fixed an issue with ”<” and ”>” buttons for the first and the last camera on the selected layout. Now it shows the first camera after the last on press on ”>” and last after the first on press on ”<”.
  • TESTED OS:
    • Android 7,8,9,10
    • iOS 11,12,13
    • iPadOS 13

In-Client Upgrade:

Build Number: 31254
Password: dpr3tt

Download Links:

 IOS
 ANDROID

19.6.30204 Mobile Client
PUBLISHED 27 Dec 2019

Release Notes:

  • BUG FIXES:
    • Fixed several issues with user permissions with custom roles such as: accessing cameras, PTZ control etc.

In-Client Upgrade:

Build Number: 30204
Password: 544095

Download Links:

 IOS
 ANDROID

19.5.30066 Mobile Client
PUBLISHED 04 Dec 2019

Release Notes:

  • IMPORTANT!
    • Starting August 1st 2019 Google stopped accepting 32-bit applications so this build contains 32-bit and 64-bit applications.
  • NEW FEATURES:
    • System Search – If there are 8 or more system tiles Systems can now be filtered by system name, owner name, owner account, and server address.
    • Enable / Disable Audio – Audio can be switched off on cameras.
    • Login Lockout – If a user tries to log in with incorrect password 5 more times an error message will appear and the login dialog will be blocked for 1 minute.
    • Playback using Server or Client Time – Added ability to switch between Server and Client time mode during playback
  • IMPROVEMENTS:
    • Time Format Unification – time format (12-hour or 24-hour) now reflects the device OS
    • Soft Trigger icons are now ordered alphabetically
    • Added “Disabled by schedule” alert when a Soft Trigger is not available b/c of Rule scheduling
    • Added ”No Live stream” placeholder on virtual camera when viewing in live mode
  • BUG FIXES:
    • Live video did not started automatically after the server was restarted. Fixed.
    • Fixed encoding issue with Chinese traditional language on iOs 13.
    • Mobile client did not stop pulling video if the system was disconnected from the cloud. Fixed.
    • Some virtual cameras were played as 8*8 pixels. Fixed.
    • Several consecutive mobile client connections could lead to server rejecting all incoming connections. Fixed.
    • Fixed an issue with a blank screen after switching to the camera without an archive.
    • Fixed an issue with a blank screen after play/pause on camera without an archive.
    • Fixed an issue with a blank screen after pausing and switching to the camera with an archive.
    • It was possible to log in to the non-configured system. Fixed.
    • It was impossible to view 2 minutes up to live from server 3.2. Fixed.
    • User could not scroll the software trigger using the swipe gestures. Fixed.
    • If the user tapped and hold on some instant soft trigger, the trigger was not activated on finger release. Fixed.
    • Fixed error while opening a virtual camera.
    • Fixed some translation issues.
    • Other UI / UX fixed and improvements
  • NEW SUPPORTED OPERATING SYSTEMS:
    • Android Q
    • iOS 13
    • iPadOS 13
  • TESTED OPERATING SYSTEMS:
    • Android 5
    • Android 6
    • Android 7
    • Android 8
    • Android 9
    • iOS 11.4
    • iOS 12.1
    • iOS 12.2

In-Client Upgrade:

Build Number: 30066
Password: t1s9rc

Download Links:

 IOS
 ANDROID

4.0.0.29988 Video Management System
PUBLISHED 31 Oct 2019

Release Notes:

  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 is no longer supported due to official end of life in April 2019. Please upgrade to Ubuntu 16 or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
    • 4.0 BETA USERS. Before installing the release version, please remove the old analytics data and plugins. See “https://networkoptix.zendesk.com/hc/en-us/articles/360035628314” for details
  • NEW OPERATING SYSTEMS/PLATFORMS
    • ARM Packages released. Please pay attention to the ARM Support Policy details here:
    • https://support.networkoptix.com/hc/en-us/articles/360035919314
  • IMPROVEMENTS
    • Added web-page to media server settings documentation.
    • Default period of scheduled database backup was changed to 1 week (6 weeks maximum).
  • BUG FIXES
    • Sometimes user could not log in to the system after cloud merge. Fixed.
    • Fixed an issue with high memory usage during UDP video stream recording.
    • Web Page Calendar worked incorrectly on Windows in time zones with DST. Fixed.
    • Fixed an issue concerning cloud users with a TLD greater than 6 chars.
    • There was no warning about the minimum requirements for the Client application. Fixed.
    • Graphical artifacts observed on different Mac devices. Fixed.
    • No audio in RTSP tracks from server with multicast streams as a source. Fixed.
    • Fixed H.265 decoding issue for generic multicast.
    • Sometimes the desktop client was frozen after jumping from an archived video to a live stream.
    • Stream URL was not refreshed after applying some changes on ”Expert” tab. Fixed.
    • Modal windows faded into the background on Mac OS 10.15. Fixed
    • Media server stopped working correctly if Advanced settings for an analog encoder were changed from the desktop client. Fixed.
    • Preview search in the desktop client worked incorrectly. Fixed.
    • Not all screens were displayed in video wall overview mode. Fixed.
    • ”Keep camera stream and profile settings” became enabled after disabling and re-enabling ”Allow System to optimize camera settings”. Fixed.
    • Fixed different media server and client crashes.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • ACTI B78 camera could not be auto-discovered. Fixed.
    • Forced ONVIF for cameras:
      • ACTI Z31, Z32, Z81, Z82, Z76, Z91, Z92, Z950, A950
    • Found a workaround for the issue with Dahua URLs streams.
    • Fixed an issue with encoder selection for secondary streams on ONVIF cameras.
    • Primary stream resolution was too low for Amcrest IP4M-1026. Fixed.
    • Input/Output fixes:
      • HIKVISION DS-2CD2955FWD*
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
    • There was ”Too Many Connections” issue if more than 5 NVR channels were opened on Scene. Fixed.
    • Server could not get chunks from NVR if response time was too long. Fixed.
  • ==================== Previous Release ===================
  • NEW FEATURES
    • H.265 for ONVIF Devices – The H.265 codec is now supported for cameras detected and managed via ONVIF.
    • Layout-as-an-Action – A predefined layout can be opened when an event occurs.
    • Secure Export – EXE and NOV exported files can be protected by a password (option is only available only if export a single stream, not Multi-Video).
    • Failover on Storage Failure – Failover now also occurs when all designated storage drives fail on a Server.
    • Virtual Camera – Users can now import offline video files (from wearable cameras, action cams, drones, etc) into archive and associate with a virtual camera which can be used like other cameras in a system.
    • RTSP / HTTP Dual Stream Support – Users can now add two streams when creating an RTSP/HTTP camera which enables dual streaming and adaptive scaling. When a secondary stream is added, the primary stream also becomes modifiable.
    • Webcam Support – Webcams (Built-In and USB) are now supported on Windows, Ubuntu Linux, and Raspbian operating systems with dual-streaming and audio support. Great for demos, operator response recording, and more.
    • Raspberry Pi Camera Support – Install the Server application and add a camera module to turn a Raspberry Pi into a smart IP camera capable of operating on its own or as part of a larger system.
    • Metadata SDK and Plugins – A software development kit (SDK) for rapid integration of intelligent 3rd party systems and devices. Includes a comprehensive feature set designed for AI and deep learning driven computer vision applications focused on object recognition and automation. Using the Metadata SDK, developers can create Plugins for the Server application that take advantage of key new features, including:
      • Metadata search by attributes, time interval or region of interest on camera
      • Object overlays on live video and playback
      • Camera-specific video analytics settings
      • Programmatic creation of custom Events in the Rules Engine
      • Plugin configuration in a new tab in System Administration Dialog.
      • Added possibility to select storage to store analytics data and other metadata.
    • Encrypted Video and HTTPS Communications – Added the ability to force the system to use HTTPS and to encrypt video traffic.
    • C2P Integration – Integration with Convergence to Pixels (aka C2P, http://www.c2p.com/), a product that integrates a wide variety of 3rd party solutions including:
      • Access Control: Axis A1001, Blue Access Cobalt X1, DMP XR550, Identicard PremiSys, Isonas Pure Access, Keri Systems NXT, RBH AximonV, DSX WinDXS
      • Asset Tracking: iWeigh, DHL, SEUR, Barcode Readers (Generic)
      • Audio Analytics: Shotspotter
      • Automation: AVEVA Wonderware, Advantec ADAM 5000 series
      • Banking: Diebold Nixdorf Opteva ATMs, Fiserv, Biometrics (IMID Access
      • LPR: Elsag MPH900, HTS C50, Q-Free Intrada, Mango DSP Viper, Neural Labs VPAR, Platesmart ARES, Vigilant Solutions, Inex Tech IZ ALPR Cameras
      • Point-of-Sale: Agilisys InfoGenesis POS, Oracle Micros Simphony/VSS, NCR Radiant 1500 Series, NCR Retalix StorePoint, POSitouch, Heartland Xpient IRIS Restaurant POS, LOC SMS, IBM-RMS
      • Video Analytics: iRONYUN.
    • Custom Watermark over Video – when ”Display watermark with username over video” option is checked, the username of the operator who exported the video is displayed on exported video and while viewing.
    • Cloud System Merge – Cloud connected Systems can now be merged together. Note that Cloud merge now works only on Cloud portal. In order to merge, the same user must have the Owner role in both systems.
    • Redesigned System Update:
      • Improved update for systems with multiple servers.
      • Improved update when bandwidth between servers is low. Update does not fail if a single server drops the connection.
      • Upgrade for unsupported operating systems can be blocked. If a new version does not support the current operating system for a server the update process will not start.
    • Updates to the Desktop Client User Interface – comprehensive revamp of UI / UX for improved usability:
      • Notifications Panel – now includes quick tabs for Notifications, Motion Detection, Bookmarks, Events and Objects as well as the ability to search and filter each respective tab
      • Resource Panel – Keyword Search has been moved to the top of the Resource panel and operators can now search for Servers, Cameras, Layouts, Showreels, Video Walls, Web Pages, Users and Local Files
      • Add Device Dialog – added the ability to assign devices to specific servers in a multi-server system
      • Camera Settings Dialog – redesigned for enhanced readability and usability
      • Device Selection Dialog – redesigned for enhanced usability
      • Time Synchronization Dialog – redesigned for enhanced readability
      • Storage Analytics Dialog. – redesigned for enhanced readability and usability
    • Action parameters placeholders for the ”Do HTTP request” action – Source, Caption or Description placeholders can be added to HTTP POST request body to be automatically replaced by the corresponding values from Generic Event query params. Placeholders syntax:
      • {event.source}
      • {event.caption}
      • {event.description}
    • Desktop Client CLI launch – Desktop client can be launched with a command line parameter to define initial layout. This allows programming pop-up like behavior.
  • IMPROVEMENTS
    • System Scalability – The maximum number of recommended servers, resources, and users in a single System has been increased significantly. If approaching Maximum recommended System size please consult with Support for scalability planning. The maximums below are based on lab testing results and could vary significantly based on the project’s real-world environment.
      • Maximum Recommended Servers in a System:100
      • Maximum Recommended Resources (Cameras, NVR Channels, I/O Modules) in a System: 10,000
      • Maximum Recommended total amount of Users in a System: 1,000.
    • Paxton Access Control integration support re-implemented.
    • Update RTSP port – Introduced the ability to modify camera RTSP port from Expert tab.
    • Overall system security improved with known vulnerabilities addressed.
    • ”Add Device…” option is now available in the main menu.
    • Added the ability to export several bookmarks in .nov and .exe file from the Bookmark Log dialog.
    • API Improvements:
      • Audio export in HLS tracks is supported.
      • Video Wall advanced API. Improved Rest API methods for working with layouts (getLayout, saveLayout). It is now also possible to display a camera on a specific monitor.
      • Added watermark for video files exported via HTTP Progressive Downloading API call.
      • Added mp4 export support for HTTP Progressive Downloading API call.
      • API: ”analytics” periodsType is now listed in ec2/recordedTimePeriods documentation.
      • Server API improvements and fixes.
    • New hotkeys for Item actions (top icons):
      • i = show / hide item Info
      • m = enter / exit Smart Motion search
      • p = enter / exit PTZ
      • d = enter / exit Fisheye Dewarping
      • w = create Zoom Window.
    • New hotkeys for Layout actions:
      • Ctrl + Shift + S = Save Layout As…
      • →, ↓, PgDn, Space, Enter = next Layout in Showreel
      • ←, ↑, PgUp, Backspace = last Layout in Showreel
      • Esc = Exit item fullscreen.
    • Minimum Grid Size for Layout – Users have the option to set a minimum Viewing Grid size (initial number of Viewing Grid items) in layout settings (works in both Desktop client and in Video Wall).
    • Video Wall Improvements:
      • It is now possible to add backgrounds to layouts on Video Wall screen.
      • It is now possible to enable/disable the Timeline on Video Wall.
    • The Bookmark button was replaced with the Thumbnails button on the Timeline.
    • Minor UX and UI improvements and fixes.
    • Added the ability to share cameras between users via drag-and-drop in the Resource Tree.
    • Licenses:
      • Edge license keys can be now be deactivated.
      • More than one Edge license key can now be activated per server.
      • I/O and Encoder licenses can also now be activated on ARM devices.
    • Minor context-sensitive help improvements.
    • Optimized processing of large bookmark databases (500+ MB).
    • The Local Files list in Resource Panel now updates when a source folder is changed or a file in the folder is removed or added.
    • Time format is now unified through the whole VMS and is taken from the operating system.
    • Rules Engine Updates (Events & Actions):
      • ”Set to full screen” and ”Exit full screen” actions added to Event Rules engine allowing video items to be displayed in full screen mode based on events.
      • Checkbox “Omit logging” added to Generic Event. When checked, a Generic Event will not be added to the event log. This allows operators to program display values as a text overlay from Generic Events without making database calls.
      • ”Storage failure” has been renamed to ”Storage issue” in the event log/rules.
      • Added “pre-recording” option to “Device recording” action.
      • Added “System is updated” event logging to the Audit trail.
      • ”Do HTTP request” action now supports HTTPS urls.
      • Added event ”Plugin event”- Plugins can generate events which can be used to create Rules in the Rules Engine.
      • Added notification if all servers in the system are not connected to the Internet and time cannot be synchronized with the Internet.
    • If aspect ratio is set to Auto in the Camera Settings dialog, the aspect ratio of the second stream will be modified to match the first stream.
    • Added Czech, Brazilian, Swedish, Finnish, Norwegian, Dutch (Belgium) and Brazilian-Portuguese languages support.
    • Added support for IP address in LDAP URL.
    • Smart Search is now supported on ARM platforms for H.265 codec streams.
    • Soft triggers are now sorted alphabetically.
    • Added the ability to backup database automatically once per day (6 days maximum).
    • I/O port name shows in related email notifications now.
    • Minimal buffer size on Desktop client for LIVE mode reduced.
    • Added server API link for generic event.
    • Added LDAP search timeout setting.
    • Added ’Trust Camera Timestamps’ on ”Expert tab. If it is enabled, the archive will be recorded with respect to camera time.
    • Client now takes into account settings on Routing Management tab and pulls video only from allowed network addresses.
    • Desktop client can be resized with a command line parameter.
    • Fetching users from LDAP was optimized a bit.
    • Changed available listed analytics events in Event Log: analytics events with configured event rule are only shown.
    • Cloud connectivity (firewalls and proxy servers) improved.
    • ”Admin DN” was renamed to ”Admin DN or CN” in LDAP settings.
    • Added video traffic delivery method indicator on item: Direct connect, NAT traversal (N) and Proxy (P)
    • Server was sending requests to manually added cameras/streams even when the auto-discovery option was disabled. Now it keeps sending requests only if Failover is enabled.
    • New hotkey for item: Esc = Exit item fullscreen
    • Links are supported now in custom text on update notification.
    • Welcome screen tiles sorting was changed. If a system is hidden it is now removed from the list of tiles.
    • The following operator actions are no longer allowed on locked layouts: item rotation, cell spacing, aspect ratio changes, interactions with zoom window.
    • Add client configuration parameters to control the default behavior of the ”Info” button. See https://networkoptix.zendesk.com/knowledge/articles/360024662753/en-us?brand_id=1386126.
    • Added plugins information on the “Server settings” dialog.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New In-Camera Analytics Support:
      • Added DW MTT analytics support for devices running firmware 4.2.1.0(17898)T)
    • The following in-camera analytics options were hidden for DW TVT VA cameras:
      • cross line people counting
      • crowd density
      • intruding people detection
      • object status changed
      • ’Video Cast detection’ also renamed to ‘Abnormal color detection’
    • Dahua in-camera analytics – tested with firmware 2.622.0000000.31.R, Build Date 2018-08-13
      • Motion detection
      • Face detection
      • Alarm detection
      • Storage absence detection
      • Storage failure detection
      • Storage low space detection
      • Video blind detection
      • Scene change detection (Video abnormal detection)
      • Audio anomaly detection (Audio input abnormal detection)
      • Login error detection
    • Dahua in-camera analytics – Not tested, but potentially supported:
      • Video loss detection
      • Defocus detection
      • Tripwire detection (Cross line detection)
      • Intrusion detection (Cross region detection)
      • Abandoned object detection (Left object detection)
      • Missing object detection (Taken away detection)
      • Audio intensity change detection (Audio mutation detection)
      • High temperature detection
      • Alarm output detection
    • Input/Output fixes:
      • Hikvision OEM (NC328-VBZ)
      • IPC222ER-F36
      • Hikvision DS-2CD2625FWDxxx, Hikvision|DS-2CD2625FWDxxx, DS-2TD2166xxx, DS-2DF8223I, DS-2DF8223I-AEL, DS-2CD2155FWD-IS, DS-2CD4A26FWD-xxx, iDS-2CD8426xxx
      • 2N Helios IP Verso and Helios IP Force
      • All Uniview models
      • DW-ENHD* encoders
      • Outputs are considered as inputs for DW-MV421D. Fixed
      • Fixed Input for DWC-PVF9M2TIR
      • Input/Output fixes for HIKVISION DS-2TD1217-6/V1
    • Added H.265 support for:
      • Vivotek FD9371-HTV
      • DWC-MB45DiA, DWC-MV85DiA, DWC-PB6M4T, DWC-PF5M1TIR.
    • PTZ Improvements:
      • Removed PTZ capabilities for: DW PZ21M69T, DWC-PVX16W,DWC-PZ21M69T,DWC-PB6M4T,DWC-MTT4Wi28,DWC-MTT4Wi36,DWC-MTT4Wi6,DWC-MVT4Wi28,DWC-MVT4Wi36,DWC-MVT4Wi6,DWC-MBT4Wi28,DWC-MBT4Wi36,DWC-MD72i4V,DWC-MD724V
      • Zoom only capabilities: DWC-MB45DiA, DWC-MTT4WiA, DWC-MVT4WiA
      • Relative PTZ move improvements for ONVIF devices – PTZ now works more accurately for ONVIF devices
      • PTZ support by ISAPI for Hikvision cameras
      • Acti B915
      • Bosch MIC IP starlight 7000HD/7000i
    • Advanced PTZ support for:
      • Flir CP-6302, FC-644ID
      • IPC_HCMN2108
      • Dahua SD50225U-HNI, DH-SD49225T-HN
      • Uniview IPC6252SR-X22U,IPC6252SL-X33UP, IPC6322SR−X22P−C
      • LTS PTZIP762X20IR
      • PTZ presets supported on Bosch VG5-7230-EPC5
      • Hikvision DS-2DF8836IV-AEL, DS-2DE4A320IW-DE
      • Vivotek SD9365/SD9366
      • Videotec UCHD-30x-VT
      • Dahua PDN6CT230HN, SD50225U-HNI
    • New Multi-Sensor Camera Support (Single License):
      • Dahua IPC-HDBW7233X-AS-E2-0280B, IPC-PDBW8800xxx, IPC-PDBW5831P-B360, PSD81602-A360, IPC-HDBW4231F-E2-M, IPC-hdbw4233x, IPC-hdbw7233x
      • Hikvision DS-2PT3326IZ-DE3, DS-2cd6d24fwd, DS-2TD2636, DS-2CD6924F*, DS-2CD6D54* and DS-2CD6D24 camera families
      • Axis P3707, P3709, Q3708, Q3709, Q6000, P3717, F34, FA54
      • Vivotek MA8391, MA9321
      • Avigilon 9W-H3-3Mxxx
      • Geovision GV-SV48000
      • Secubest NVM3-A16
      • SHS-2215IZ
      • Manually added DWC-PVX16W camera appeared as a multi-sensor node with 3 channels and 1 independent one. Fixed
      • FLIR: DH-390.
    • New Devices Supported with Analog Encoder License:
      • Dahua DH-XVR encoder line, DHI-NVR5832, DH-NVR4232, DH-NVR4216, DHI-NVR52a16, IPC-PDB4830-b360, IPC-hdbw13a0e, DHI-NVR5832-16p-4ks2, DH-NVR4232-4k, DH-NVR4216-8p-4k, DHI-NVR52a16-16p-4ks2, X52a3a, DH-xvr5108hs-x, DH-xvr4108hs-x, DHI-nvr4416-16p-4ks2, DH-xvr5108hs-4kl-x, DH-xvr5108hs-x, DHI-nvr4432-4ks2, DH-xvr7104he-4kl-x, DH-xvr5116he-x, DH-xvr7108e-4kl-b-x
      • Hikvision DS-6708, DS-7208HQHI-K2+, DS-8116, DS-9016, DS-6701HFI, DS-9804, DS-7732, DS-7708, DS-6708HQHI-SATA, DS-7116hqhi-k1, DS-7208hthi-k2, DS-7204hqhi, DS-6716huhi, DS-7216hqhi
      • Uniview DVS4101, DVS4104, EC1504-HF, NVR304-16EP, NVR308-64E, NVR308-32R-B, NVR304-32E*, NVR302-16S-P16, NVR302-08S-P8, NVR201-04U, NVR-301-08S, NVR301-081-P8, NVR201-041P
      • Bosch VIP X1600 XFM4, VIP X1600 M4S, VIDEOJET MULTI 4000
      • Sony SNT-EP104, SNT-EP154, SNT-EX101E
      • Vivotek VS8100, VS8102
      • Digital Watchdog: DW-ENHD16x
      • Vista VIPER-HDA encoders
      • Novicam TR2116A
      • Vicon VLR-ENC-16
      • RVI: rvi-hdr16lb-m_v.2
      • ACTi V24
      • Sharp YC-r0814.
      • HiWatch: DS-h116g
      • LTS LTN8716K-HT
      • Visualint VI-M-4-1000
      • HAR324-16
      • Hunt Electronics HAR324-16
      • Zynek zkd408a, zkd608a, zkd408b
      • ENEO MAM-6me1012mta,
      • Epcom EV1016turbox
      • Costar CRT1200en
      • Swann DVR16-4500
    • Arecont Vision:
      • AV02CID-100, AV12ZMD-401, 08ZMV-300, AV20CMB-100, AV05CID, AV20975, AV12975, AV12976.
      • AV40185 sensor order incorrect. Fixed.
      • Fixed Arecont AV08CPD-118.
      • When taking a screenshot from a 2-sensor AV camera, only 1 sensor was displayed. Fixed.
      • Motion detection didn’t work on AV20CPD-118. Fixed.
      • The lens order of Arecont’s AV4656DN (Duo) was incorrect. Fixed.
      • Increased target bitrate for multi-sensor Arecont Vision cameras in RTSP mode
      • Server pulled RTSP stream from multisensor Arecont Vision cameras with much lower fps than expected. Fixed.
    • Axis:
      • AXISP1375, AXISQ6215, AXISM4206, AXISA8207, AXISP1445, AXISP3807, AXISP3235, AXISP3518, AXISD201-S, AXISQ3527, AXISP9106, **Axis M7011, M7014, P7216, Q7424RMKII supported.
      • Audio did not work on Axis cameras after upgrade to 9.x firmware. Fixed.
      • Codec and resolution could not be changed on Axis cameras with 9.x firmware. Fixed.
      • 2-way audio could not be changed on Axis cameras with 9.x firmware. Fixed.
    • Rule “Output on Soft Trigger” did not work as expected for fixed event duration on AXIS A8105-E. Fixed.
      • IP address was changing in Resource Panel for Axis cameras with firmware higher than 7.0 causing gaps in the Timeline. Fixed.
      • Axis I/O module A9161 supported.
    • Digital Watchdog:
      • Choppy video experienced with DW-PB6M4T. Fixed.
      • DWC-MV72i28v was not properly added manually, if ONVIF port differed from 80. Fixed.
      • DWC-PVX16W – sensors now display separately (no longer stitched).
      • Multi-channel video streaming for DW multi-sensor cameras is now available through API.
      • Added 2way audio support for DWC-PF5M1TIR
      • Preview image did not display on the Fisheye tab for DW CaaS Fisheye cameras. Fixed.
      • Snapshot in email on motion detection of DWC-PB6M4T panoramic camera with 3 sensors showed image of one random sensor and black for other sensors. Fixed.
      • Expert setting “Calculate bitrate per GOP” was automatically forced for some DW cameras. Now its default state is “disabled” and it can be modified by operators.
      • Flickering observed on DW Multi-sensor cameras in Mobile app. Fixed.
    • Hikvision/Vivotek/Dahua:
      • ”Face detection” was incorrectly detected as an available in-camera analytic for Hikvision cameras. Fixed.
      • ”Line crossing” event didn’t work for Hikvision DS-2CD2555FWD-I and potentially for other models. Fixed.
      • Desktop client was freezing while viewing H.265 stream from Hikvision DS-2CD6A64F-IHS/NFC in full screen. Fixed.
      • Hikvision DS-2CD2955FWD-IS failed to stream if audio was enabled and codec was set to g711u. Fixed.
      • Audio could not be enabled for Hikvision DS-2CD2543G0-IS stream and potentially on other models. Fixed.
      • Wrong standard resolution was chosen for some Hikvision cameras. Fixed.
      • After upgrade to version 3.2, codec switched from H.265 to H.264 on Hikvision and Vivotek cameras. Fixed.
      • Some channels from Hikvision encoders failed to display. Fixed.
      • Hikvision 6716 encoder performance improvements
      • Hikvision DS-2DE2A204IW-DE3 framerate issue resolved
      • Implemented PTZ control for Pelco cameras on Hikvision DS-7332HUHI-K4 DVR.
      • Vivotek FD8162 showed erroneous Advanced PTZ capabilities. Fixed
      • VIVOTEK MA9321-EHTV only worked with H265 codec, but not with H264. Fixed.
      • Max resolution was not always detected correctly for some Dahua cameras. Fixed.
    • Other Specific Device Updates:
      • Digital I/O did not work for 2N Helios cameras. Fixed.
      • Axis encoders, Axis multi-channel cameras and Hikvision multi-channel cameras were added as independent devices causing IP conflict notifications. Fixed.
      • Server reported RTP errors on UNIVIEW IPC542E-DLC-C when no error existed. Fixed.
      • Incorrect secondary stream URL was configured on EVO-180WxD. Fixed.
      • Rule “Generic Event – output trigger” sometimes stopped working on ADAM I/O Modules. Fixed.
      • Added a possibility to view a multicast stream from ONVIF cameras.
      • Worked around resolution issue for Honeywell H4W4PER2.
      • OpenEye c7413-awr supported
  • BUG FIXES
    • Snapshot was incorrect in email notification on an Apple Mail client. Fixed.
    • The Timeline did not appear for offline cameras on offline server in multi-server systems. Fixed.
    • Single video export did network properly for a few specific cameras. Fixed.
    • ”Target” value was not filled in event log if event camera and action camera were on different servers. Fixed.
    • PTZ tour speed did not work as expected for ONVIF cameras. Fixed.
    • Updates tab was broken after opening dialog with a custom update warning. Fixed.
    • Offline or removed cameras were not displayed in the Resource Panel after storage archive was rebuilt. Fixed.
    • Could not add external storage with password and enabled quota. Fixed.
    • Client sometimes froze during ”Browse for update File” on MacOS. Fixed.
    • Sometimes Desktop client failed to connect to Server via Cloud. Fixed.
    • ”Play archive from the web” is removed from email for cameras on server without public IP.
    • Zoom windows aspect ratio was incorrect for wide items. Fixed.
    • The Timeline was not shown for video files downloaded from Web Client. Fixed.
    • Client auto-restart didn’t work on MacOS if two Desktop Clients were opened. Fixed.
    • Recording did not start when adequate storage space was freed up. Fixed.
    • .nov file would not open if Desktop Client had not already been opened at least once on MacOs. Fixed.
    • Server public IP was not detected in rare cases. Fixed.
    • Adding a new storage with inadequate free space lead to archive removal. Fixed.
    • Issue with incorrect free space on Advanced settings for storage quota. Fixed.
    • Auto-discovered multichannel resource channels were distributed between different Servers within the system. Fixed.
    • Cloud user was not logged out automatically from Desktop Client if password was changed. Fixed.
    • Incorrect time on Web Client timeline if server local OS time was not synchronized. Fixed.
    • Incorrect notification occurred for generic event with “+” in source/caption/description. Fixed.
    • Video archive for some cameras with default password was not available in Web/Cloud Client. Fixed.
    • Entire system was disconnected from the Cloud if just one Server was detached from the system. Fixed.
    • Sometimes LPR Analytics feature was not available in Server. Fixed.
    • Desktop client experienced crashes during Bookmark search with Japanese symbols. Fixed.
    • Desktop client experienced crashes when adding .*png file to Showreel. Fixed.
    • Errors displaying the Calendar and the Timeline in the Desktop client when selecting an offline camera on an offline merged server. Fixed.
    • Gaps in archive occurred when Servers were experiencing high load and time synchronization was turned on. Fixed.
    • Desktop Client sometimes froze after clicking OK on the ”Update is complete” message box. Fixed.
    • Checkbox ”Disable Native presets” in Advanced tab in Camera Settings dialog was disabled for some ONVIF cameras. Fixed.
    • ”Move to position” on dewarped video caused image from camera to black out until the move was complete. Fixed.
    • Linux-based server monitoring graphs repeatedly dropped to 0 without known reason. Fixed.
    • In rare cases camera stream URL did not change after camera IP address was modified. Fixed.
    • Issue with ”Restore from backup” feature in Desktop client on Mac OS. Fixed.
    • H.265 streams pulled from Server could not be played in VLC player. Fixed.
    • Desktop client did not react to ”Time synchronization is disabled” option. Fixed.
    • Uploading .mp3 files for the ”Play sound” action failed. Fixed
    • Windows-based servers sometimes sent misformatted emails. Fixed
    • Intrusion Detection notifications were not received from some Hikvision models. Issue has been worked around. Check with support for more info.
    • Exporting H.265 video stream to .avi file did not work. Fixed.
    • Layout background images did not work on Mac Client. Fixed.
    • User could not change the background image in Desktop Client running on Mac OS X. Fixed.
    • Server misinterpreted the amount of free space on Nx1 causing false-positive ”System Drive Full” event. Fixed.
    • Servers status process worked incorrectly with experimental p2p mode enabled. Fixed.
    • ”Allow System to optimize device settings” checkbox was set incorrectly after upgrade on Ubuntu. Fixed.
    • Issue with the timestamp on “Export video” dialog for part of an archive with daylight saving time. Fixed.
    • API function “Download archive” allowed downloading only low quality stream even though camera had only one (high quality) stream. Fixed.
    • Incorrect screenshot requested from the video archive on some cameras which support codec changing. Fixed.
    • RTSP stream from server could not be pulled with ”codec=mjpeg” parameter. Fixed.
    • One-click update failed in some multi-server environments. Fixed.
    • System Administration Dialog window height was too large for display and could not be changed when more than 50 servers were merged in a System. Fixed.
    • The ”Camera disconnected” event was not aggregated by cameras. Fixed.
    • Fixed playback issues that happened when playing archive with gaps in Web Client.
    • Wrong screenshots from cameras were displayed in notification panel when Generic Events occurred. Fixed.
    • Server was unable to play some streams added as RTSP links. Fixed.
    • Reported stability issues with Server RTSP streaming. Fixed.
    • Mediaserver continued recording to the target directory even after target device had been unmounted. Fixed.
    • Sometimes archive was not available after archive reindex for storages with 10000+ files. Fixed.
    • Motion search was reset if any other camera panel button was pressed. Fixed.
    • Multicast stream with the same port but with different IP didn’t work. Fixed.
    • Calendar worked incorrectly for current date with enabled thumbnails on timeline. Fixed.
    • HLS live stream did not display in Microsoft Edge. Fixed.
    • Server detected only one analytics event for Hikvision camera after start. Fixed.
    • When logging in as ”Live Viewer”, opening several cameras and pressing Space, “Not enough licenses” message appeared. Fixed.
    • CIFS storage was not unmounted when server was shut down.Fixed.
    • Footage from ”deleted cameras” was not accessible after rebuilding the Archive Index on a new Server. Fixed.
    • Now desktop client uses currently connected server for all LDAP request.
    • Saved password on welcome screen was changed automatically when user changed his password. Fixed.
    • Client sometimes froze when opening/closing multiple RTSP streams. Fixed.
    • Incorrect Japanese Translation. Fixed
    • Server crashed intermittently when importing a large number of users (more than 6000). Fixed.
    • Slider position was incorrect if user paused video, switched to another tab and back. Fixed.
    • 2-way audio button was displayed on items on preview search layout. Fixed.
    • Other users local files were shown in resource tree. Fixed.
    • HLS did not work with a camera that had dot in unique resource name. Fixed.
    • Desktop client windows did not properly scale when dragging between screens with different resolutions. Fixed.
    • Bookmark could be searched via a deleted tag. Fixed.
    • The ”Setup new system” dialogue appeared before the EULA was accepted. Fixed.
    • Smart search area was reset after making a screenshot. Fixed.
    • HTML tags were not processed correctly in the custom update notification. Fixed.
    • All exported files were read-only after exporting ”read-only” file, regardless of applied export settings. Fixed.
    • Server Setup dialog was not translated. Fixed.
    • Layout aspect ratio was not changed if only one camera was opened on the layout and AR was changed for it. Fixed.
    • Aspect ratio for layout with background changed after the first item dropped to such layout. Fixed.
    • After reconnecting to another cloud system a mouse click was simulated on MacOS client before a user actually clicked on anything. Fixed.
    • ”Edit” and ”Hide” context menu items were not translated on tiles. Fixed.
    • Exported layout where rotation or aspect ratio change was applied to items displayed as unsaved. Fixed.
    • Current bitrate was not shown on “Storage Analytics” for cameras with Motion+Low res recording. Fixed.
    • Camera full screen mode did not work in Chrome. Fixed.
    • Web client did not work for all new web users. Fixed.
    • Several memory leaks identified during testing. Fixed.
    • Sometimes cameras added as RTSP streams froze. Fixed.
    • Sometimes old archive become unmanaged by Server and not accessible. Fixed.
    • Fixed issues with synchronization with the internal archive of Lilin cameras.
  • NEW OPERATING SYSTEMS/PLATFORMS
    • Universal linux_arm32 distribution for Banana Pi M3 and Raspberry Pi 3 model B.
    • MacOS 10.15 “Catalina”.
    • Ubuntu Linux 18.04 LTS now supported.
    • NVIDIA Jetson Support – Server application and Desktop Client installation packages are now available for NVIDIA Jetson Nano, TX2 and Xavier developer boards with Nvidia JetPack installed. Desktop client for NVIDIA Jetson is an experimental feature now. We appreciate any feedback.
    • Universal linux_arm64 distribution for ARM-64 platform – Server application and Desktop client installation packages are now available. It is an experimental feature now. We appreciate any feedback.
  • TESTED OPERATING SYSTEMS
    • Windows 7, 8, 8.1, 10/Enterprise, 2008 R2, 2012, 2012 R2, 2016 v1607
    • Ubuntu LTS: 16.04, 18.04
    • OS X 10.13: ”High Sierra”, 10.14: “Mojave”, 10.15 “Catalina”.
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (Stretch)).
  • BREAKING CHANGES
    • 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported.
    • Ubuntu 14.04 is no longer supported due to official end of life in April 2019.
    • Windows Server 2008 support was dropped.
  • KNOWN LIMITATIONS
    • USB Webcams will only be discovered if they are recognized by the operating system they are installed upon. Windows often automatically installs the driver for USB webcams. Ubuntu Linux typically requires driver / 3rd party software installation in order for a USB webcam to be recognized.
    • Audio is disabled for the Raspberry Pi camera.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • Hanwha cameras lens control now supported.
    • Multicast stream support via generic RTSP – User must enable multicast (RTSP) in the video profile for Hanwha IP cameras before streams can be added to a Server using generic RTSP (example RTSP stream address: rtsp://192.168.0.78/multicast/profile5/media.smp).
    • New Device Support:
      • Hanwha NVR (Including PTZ): QRN-1610S, QRN-810S, QRN-410S.
    • New Hanwha In-Camera Analytics Events:
      • Queue Management (queue-meter)
      • Shock Detection
      • Temperature change detection (tested on TNO-4030T).
    • New PTZ Support:
      • PTZ Override now supported for Box Camera / Zoom Box Camera with RS-422/485
      • Hanwha XRN-2010 Advanced PTZ Support added
      • Improved PTZ movement (increased smoothness) for many Hanwha cameras
      • PTZ capabilities added for all SPE encoders. PTZ capabilities can now be modified on the “Expert” tab in the Camera Settings dialog
    • Hanwha SNF-8010 camera misreported ”PTZ” icon fixed.
    • Other Device Fixes:
      • Analog Encoder License support added for Hanwha SPE-* encoders
      • Hanwha SNP-5300 initialization fixed
      • Audio setup in NVR camera channels was missing in advanced camera settings. Fixed
      • If PNM-9000VQ channels each had a different resolution they showed incorrectly in the “Advanced” tab. Fixed
      • X Series Cameras were discovered twice. Fixed
      • Camera output via NVR support added
      • Added ”Smart Zoom” support for Hanwha 4-headed ’fixed’ lens camera with built-in 2M 32x PTZ camera (PNM-9320VQP). Once “Smart Zoom” button is clicked, users can draw a box on any fixed sensor video to launch the PTZ camera and target the user input zoom area.
    • Incorrect timeline for SRD-1685. Fixed.
    • Sometimes SPE-410 was discovered twice. Fixed.
    • XRN-1610 worked incorrectly if NVR password contained ’:’ . Fixed.
    • Hanwha servers RAID diagnostic notification – If one on the disk in the RAID goes offline, notification is generated.
    • Added ability to view a multicast stream from ONVIF and Hanwha cameras.
    • Not all chunks were shown on timeline from Hanwha NVR in case of ”Cont+Evnt” recording type. Fixed.
    • Unable to view archive from NVR channel with offline camera. Fixed.
    • Resolution could be changed via Advanced settings even if the “Keep camera streams and profiles settings” option was set. Fixed.
    • While controlling PTZ move on XRN-2010 the camera was still moving after the mouse button was released. Fixed.
    • NVR channel audio checkbox ”Enable Audio” was disabled until NVR was re-registered. Fixed.
    • Incorrect audio bitrate in the “Advanced” tab for PNF-9010. Fixed.
    • Live and archive video didn’t work in Web Client for systems with NVRs. Fixed.

In-Client Upgrade:

Build Number: 29988
Password: hiavud

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

19.4.29834 Mobile Client
PUBLISHED 04 Oct 2019

Release Notes:

  • IMPORTANT!
    • After installing this release battery life on iPhone 11 may be affected.
  • BUG FIXES:
    • Fixed compatibility issues with iPhone 11.

In-Client Upgrade:

Build Number: 29834
Password: p24f09

Download Links:

 IOS

19.3.29420 Mobile Client
PUBLISHED 24 Jul 2019

Release Notes:

  • IMPORTANT!
  • Starting August 1st 2019 Google stops accepting 32-bit applications and publish them on Play Market. Afterwards previously uploaded 32-bit apps will still be available on Google play, only new applications won’t be accepted.
  • This version is provided in 32-bit format so it is crucial to update it on Google Play before August 1st.
  • IMPROVEMENTS:
    • Earphone speaker was used to play back sound from cameras on iOS. Now loudspeaker is used by default.
  • BUG FIXES:
    • Some new mobile devices displayed a black screen instead of video from certain fish-eye cameras. Fixed.
    • Fixed wrong aspect ratio for Fish-eye cameras while navigating with “<” and ”>” buttons.
    • The video from cameras was displayed pixelated on some servers with low processor power. Fixed.
  • TESTED OS:
    • Android 8
    • Android 9
    • iOS 11.4
    • iOS 12.1
    • iOS 12.3

In-Client Upgrade:

Build Number: 29420
Password: xez5gm

Download Links:

 IOS
 ANDROID

19.1.29041 Mobile Client
PUBLISHED 24 May 2019

Release Notes:

  • NEW FEATURES:
    • Smart Motion Search – Users can now search archived video by selecting an entire video or specific area. When Smart Motion Search has been activated users will see only parts of the archive where motion has been detected.
  • IMPROVEMENTS:
    • Added previous / next time period buttons – navigating through archive on the Timeline is easier now.
    • Timeline zoom level does not change while switching between cameras.
    • Added Finnish language.
  • BUG FIXES:
  • ”Best quality” was disabled in portrait mode with QHD video on iPhone devices. Fixed.
    • Server tiles occupied only a part of the screen on iPad Pro. Fixed.
    • Known compatibility issues with iPad Pro. Fixed.
    • Incorrect authorization form was displayed if user input an invalid cloud username and password and then clicked “Back”. Fixed.
    • Playback controls intermittently disappear. Fixed.
  • BREAKING CHANGES:
    • Android 4.x is no longer supported.
    • iOS 10.x and earlier are no longer supported.
  • KNOWN ISSUES:
  • TESTED OS:
    • Android 5
    • Android 6
    • Android 7
    • Android 8
    • Android 9
    • iOS 11.4
    • iOS 12.1
    • iOS 12.2

In-Client Upgrade:

Build Number: 29041
Password: lqob5p

Download Links:

 ANDROID
 IOS

18.4.24021 Mobile Client
PUBLISHED 16 Oct 2018

Release Notes:

  • IMPORTANT!
    • After installing this release battery life on iPhone XS/XS Max may be affected.
  • BUG FIXES:
    • Fixed compatibility issues with iPhone XS/XS Max.
    • Non-cloud connections can be removed with “Delete” button on the “Edit connection” dialog.

In-Client Upgrade:

Build Number: 24021
Password: lcyine

Download Links:

 ANDROID
 IOS

3.2.0.20840 Video Management System
PUBLISHED 27 Jul 2018

Release Notes:

  • ATTENTION!!!
    • If you are on Windows 7, please make sure the following updates are NOT installed. If they are installed, please uninstall them first or you may experience issues with upgrade!:
      • KB4340556
      • KB4338818
      • KB4054530
    • See details *[here](https://support.hanwhasecurity.com/hc/en-us/articles/360007621613)*
    • DO NOT UPGRADE SYSTEMS USING THE PAXTON INTEGRATION TO THIS PATCH. This release of v3.2 does not support Paxton Access Control, which is implemented in the build 3.2.0.28100 or higher.
  • NEW DEVICE SUPPORT/IMPROVEMENTS
    • Analog Encoder License support for Hanwha SPE-1610/410 encoder models.
  • BUG FIXES:
    • Audio playback/export did not function as expected on Hanwha NVRs. Fixed.
    • Server did not initialize properly If a large storage drive was mounted to server directory. Fixed.
    • Analytics events did not function as expected for some Hikvision cameras. Fixed.
    • Italian language icon was missing in the Local Settings Dialog. Fixed.
  • IMPROVEMENTS:
    • Added Ukrainian language.
  • ——————————————————————————————————————
  • ———– INITIAL RELEASE NOTES FOR 3.2.0.20807 (Jul 09, 2018) ———–
  • ——————————————————————————————————————
  • NEW FEATURES
    • NVR improvements (X, P, Q series)
      • PTZ support
      • Cameras advanced settings support
      • Secondary stream for NVRs support during Live
    • In-Camera Analytics Support – Users can now use in-camera analytics events when creating rules in the rules engine for Axis, Digital Watchdog, and Hikvision cameras (previously only Hanwha).
    • Enhanced Export – a completely redesigned video export with the ability to burn in watermark logos during export.
    • Export Bookmarks from Timeline – a button has been added to allow users to export bookmarks directly from the Timeline.
    • Custom Camera Logical ID – Users can assign a custom Logical ID in the Camera Settings dialog to create an alias for the Camera ID in server API calls.
    • Contextual Help Revamp – A fully revamped version of the help manual.
  • NEW DEVICE SUPPORT/IMPROVEMENTS
    • Improved NVR playback (Hanwha X, P, Q series)
    • Device support added for:
      • Hanwha network video encoder SPE-410, SPE-1610
      • Arecont Vision AV08ZMD-300,AV02CID-100,AV05CID-100, AV02CMB-100, AV05CMB-100, AV02CLB-100, AV05CLB-100, AV02CLD-100, AV05CLD-100, AV08CPD-118, AV20CPD-118
      • Axis Q6214, M5054, D2050, Q6124, M5054, D2050, P1367, P1368, F40-Q1765, XF60-Q1765, P40-Q1765, F34, FA54, M5525, Q8742, P1275, Q8741, FA1105, FA4115, P1245, P1265, F1004, M3048, F8804, P3375, F4005, F1025, F1005, Q3517, Q8685, P3374, FA1125, F1015, F1035, Q3504, Q8642, Q8641, XF60-Q2901, XP40-Q1942, XF40-Q2901,P1447, Q3515, P1447, Q3515, M5065, M3058, M3015, P1290, Q6125, M3057, Q1645, Q1647, M5055, M3016, P1280, P1448.
      • Axis F44 encoder
      • Hikvision DS-7216, DS-2DF6223-CX
      • Hikvision 6704 encoder
    • 2-Way Audio support for:
      • ONVIF devices
      • Sony SNC-CX600,SNC-VM600, SNC-VM630, SNC-VM641, SNC-VB632, SNC-VB642, SNC-WR632, SNC-WR602, SNC-WR630, SNC-EM641
      • DW camera line
      • Hikvision cameras with firmware 5.3 and newer
    • Advanced PTZ support for:
      • UNIVIEW IPC6253SR-X33
      • Securicorp SCL-SDM03MVIR-WD3533X.
      • Hikvision DS-2DF8436IX-AELW, DS-2DF8236IZ-AEL, DS-2DE4220W, DS-2DE4220IW, DS-2DE7330IW-AE,DS-2DP1636ZIX-D/236
      • Vista VK2-HD30-PM
    • Analog Encoder License support for:
      • Acti V23
      • UNIVEW NVR302-16S-P16 *,NVR302-08S-P8
      • Sony SNT-EX104, SNT-EX154, SNT-EP154
      • Dahua DHI-HCVR7108H-V2, DHI-HCVR7108H-S2
      • Siqura EVE FOUR
      • Hikvision DS-6708
    • Input/Output fixes for:
      • Hikvision DS-2DE4A220IW-DE, DS-2CD2522FWD,DS-2CD2142FWD and OEM’ed versions, DS-6716, DS-6708
      • DWC-PF5M1TIR, DWC-MB45DiA, DWC-MV85DiA, DWC-PB6M4T
    • Ability to change image resolution and adjust bitrate (fine tuning) for:
      • Axis
      • Acti
      • Hikvision
      • ONVIF cameras
    • PTZ support added for some old Samsung cameras.
    • H.265 support for DWC-MTT4Wi36.
    • G.726 audio playback support.
    • G.726 and G.711 audio export to mp4 support.
    • FPS limit increased to 10 for Arecont Vision AV12275 and AV12276 cameras
    • DWC-PVX16W, DWC-PVX16W4, DWC-PVX16W6, DWC-PVX16W28, DWC-PZ21M69T multi-sensor cameras now have stitched view.
  • IMPROVEMENTS
    • Redesigned video export.
    • Vulnerability fixes.
    • EULA fixes in Windows installer and server web page.
    • If EULA is updated, it is shown once on client launch and needs to be accepted.
    • Comprehensive user manual updates.
    • Analytics event types are split into impulse and stateful.
    • Developer feedback links were removed.
    • Improved minimum firmware warning for NVR.
    • Added message ”Too many connections” for NVR in Web Client.
    • Added ”Setup password” message in Web Client.
    • Cloud Beta warning has been removed from the System Administration dialog.
    • Events are split into groups in the Event Rules dialog.
    • Added a context menu to all local system tiles on the Welcome page.
    • Improved timeline behavior when motion search is activated.
    • Separate ”Web page” tab in ”Camera Settings/Advanced” dialog.
    • Database backup performed automatically prior to merging systems.
    • If multiple cameras do not support chosen event, a warning message is displayed.
    • Improved support for multi-sensor cameras (by UI and license).
    • Screen recording is disabled for users without Export Archive permission.
    • Checkbox ”Launch video wall when Windows starts” is set by default now.
    • ”Do HTTP Request” action improvements: multiple methods are supported (POST, GET, DELETE, PUT etc).
    • USB storage support. USB storage is not enabled by default but can be enabled with a parameter in config file.
    • Adaptive Scaling improvements.
    • Improved context help.
    • ”Local files” are no longer automatically expanded in the Resource Tree.
    • An administrator fetched by LDAP can now modify LDAP settings and fetch users.
  • MAC OS FIXES:
    • Improved timeline on Web Client for retina displays.
    • Improved marker fade animation when timeline panel hides.
    • Animation of the time marker for NOV files is not smooth. Fixed.
  • Bug Fixes:
    • Cloud connectivity issues on ARM devices. Fixed.
    • System time was shown in UTC instead of correct time zone. Fixed.
    • Incorrect timeline in multi-video export. Fixed.
    • License key was truncated on ”System Administration/Licenses”. Fixed.
    • Calendar showed incorrect date if client and server dates were different. Fixed.
    • It was possible to change the password for a particular channel on multi-channel devices. Fixed.
    • Links to the video were added to ”Input event” email for a camera without recording. Fixed.
    • Scene went upside down if client switched to window mode and Resource Tree was resized from maximum to minimum. Fixed.
    • ”The pipe is being closed” issue while upgrading through the installer. Fixed.
    • Manual activation link was unclickable in ”System Administration/Licenses/Manual Activation”. Fixed
    • Network Storage drive could be initialized first, which was slow. Local drives are now always initialized first, which is fast, so recording starts quickly no matter what.
    • UDP multicast stream recording could stop after some time although live view was ok. Fixed.
    • Advanced settings were not shown as a web page for DW-CPRO cameras. Fixed.
    • ”No Signal” error for Hikvision 2CD6362F-I. Fixed.
    • RTSP streams from VLC as RTSP server could not be viewed in Wave. Fixed.
    • Connectivity issues with Axis cameras opened in Web Client from Cloud Admin interface. Fixed.
    • DW cameras showed ”404” error instead of web page in the ”Advanced” tab. Fixed.
    • DTV cameras caused severe memory leaks in Media Server. Fixed.
    • Cameras added as generic RTSP links reappeared instantly after removal. Fixed.
    • DWC-PB6M4T camera improperly worked after autodiscovery. Fix was tested with firmware ver. 1.0.4.030b build on 2017-01-24.
    • ”Offline” tiles could not be removed from the welcome screen. Fixed.
    • Resolution was immediately switched to low quality during fast forward and rewind regardless of CPU load. Fixed.
    • Auto-discovered NVR was shown in the Resource Tree as an unauthorized camera. Fixed.
    • Default password change was not detected in ”Camera Settings” dialog. Fixed.
    • Motion detection analytics event was not triggered on Wave for ENCODER SPE-1610s. Fixed.
    • Hanwha XRN-1610 with a new firmware (2.10) did not work in Wave. Fixed.
    • Hanwha PRN-4011 hung if Client tried to play archive from 15 channels. Fixed
    • Timeline was not displayed for Hanwha NVR with many cameras and small chunks. Fixed.
    • Server did not start on RPI. Fixed.
    • ”Enable audio” option was available for Axis cameras without audio support. Fixed.
    • Server added only a single stream from Axis Q6000. Now all four sensors can be added.
    • Archive backup bandwidth limit did not work for local drives. Fixed.
    • Server failed to add NAS with domains specified in username. Fixed
      • Video wall improperly detected screen geometry if more than six displays were attached. Fixed.
    • Audit trail did not log unsuccessful login attempts. Fixed.
    • In multi-server systems, camera could be recorded to several servers simultaneously. Fixed.
    • Server did not add Axis P3707 camera after a successful search. Fixed.
    • Single and multi-sensor cameras played asynchronously. Fixed.
    • Different UI and user manual translation issues. Fixed.
    • Client sometimes stuck when several clients were open. Fixed.
    • ”Initialize focus” button did not work for Hanwha QND-7080. Fixed.
    • Uniview DVS4116 auto discovered information was incorrect. Fixed.
    • Axis horn speaker failed to work after upgrade to 3.1. Fixed.
    • Local time synchronization might misbehave if CPU clocks were imprecise. Fixed.
    • Multi-channel cameras had incorrect resolution in ”Information” overlay in 2×2 mode. Fixed.
    • No audio from Acti cameras of AB2L platform. Fixed.
    • Dahua DH-SD22404T-GN PTZ did not follow in-client joystick commands. Fixed.
    • Dragging zoom window between ultra-widescreen and normal camera caused aspect ratio misbehavior. Fixed.
    • Sound from some cameras was played back with distortion on high frequencies. Fixed.
    • If camera was manually added and camera IP was changed after that, camera IP was not adjusted after new manual search. Fixed.
    • Various server and client crashes fixed.
    • Slight API documentation fixes.
  • TESTED OS:
    • Windows 7
    • Windows 8
    • Windows 8.1
    • Windows 10
    • Windows Server 2008
    • Windows Server 2008 R2
    • Windows Server 2012
    • Windows Server 2012 R2
    • Windows Server 2016 v1607
    • Windows 10 Enterprise
    • Ubuntu 14.04 LTS
    • Ubuntu 16.04 LTS
    • OSX 10.11: ”El Capitan”
    • OSX 10.12: ”Sierra”
    • OSX 10.13: ”High Sierra”
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (stretch))
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.9 (Linux 8.0 (jessie))
    • Banana Pi BPI-M1/BPI-M1+ Kernel version 3.4 (Linux 8.0 (jessie))
  • KNOWN LIMITATIONS:
    • Advanced Settings do not work for multi-channel cameras (PNM series except PNM-9020) via NVR.
    • DW Analytics.
      • Events don’t work if VCA and MD events are enabled simultaneously.
      • Need to wait for 2 minutes after event is enabled on camera web page.
      • Events work for all zones but don’t work for a specific zone.
      • Events stop working if camera CPU is more than 80%.
    • DW MTT Analytics:
      • Some events do not work simultaneously on DWC-MTT series cameras.
      • Camera sends spurious notifications for some events when settings are changed.
    • Axis analytics. If Axis People Counter is enabled on Axis camera, auto and manual discovery don’t work in software. Camera issue.
    • Recorded G.726 audio with 16 Kbit bitrate is not played in archive.
    • Export H.265 to .avi is not supported.

In-Client Upgrade:

Build Number: 20840
Password: t7pi57

Download Links:

 ARM
 LINUX
 MACOS
 WINDOWS

3.2.0.20807 Video Management System
PUBLISHED 06 Jul 2018

Release Notes:

  • NEW FEATURES
    • In-Camera Analytics Support – Users can now use in-camera analytics events when creating rules in the rules engine for Axis, Digital Watchdog, and Hikvision cameras (previously only Hanwha).
    • Enhanced Export – a completely redesigned video export with the ability to burn in watermark logos during export.
    • Export Bookmarks from Timeline – a button has been added to allow users to export bookmarks directly from the Timeline.
    • Custom Camera Logical ID – Users can assign a custom Logical ID in the Camera Settings dialog to create an alias for the Camera ID in server API calls.
    • Contextual Help Revamp – A fully revamped version of the help manual.
  • NEW DEVICE SUPPORT/IMPROVEMENTS
    • Device support added for:
      • Axis Q6214, M5054, D2050, Q6124, M5054, D2050, P1367, P1368, F40-Q1765, XF60-Q1765, P40-Q1765, F34, FA54, M5525, Q8742, P1275, Q8741, FA1105, FA4115, P1245, P1265, F1004, M3048, F8804, P3375, F4005, F1025, F1005, Q3517, Q8685, P3374, FA1125, F1015, F1035, Q3504, Q8642, Q8641, XF60-Q2901, XP40-Q1942, XF40-Q2901,P1447, Q3515, P1447, Q3515, M5065, M3058, M3015, P1290, Q6125, M3057, Q1645, Q1647, M5055, M3016, P1280, P1448.
      • Axis F44 encoder
      • Arecont Vision AV08ZMD-300,AV02CID-100,AV05CID-100, AV02CMB-100, AV05CMB-100, AV02CLB-100, AV05CLB-100, AV02CLD-100, AV05CLD-100, AV08CPD-118, AV20CPD-118
      • Hikvision DS-7216, DS-2DF6223-CX
      • Hikvision 6704 encoder
      • Hanwha network video encoder SPE-410, SPE-1610
    • 2-Way Audio support for:
      • ONVIF devices
      • Sony SNC-CX600,SNC-VM600, SNC-VM630, SNC-VM641, SNC-VB632, SNC-VB642, SNC-WR632, SNC-WR602, SNC-WR630, SNC-EM641
      • DW camera line
      • Hikvision cameras with firmware 5.3 and newer
    • Advanced PTZ support for:
      • UNIVIEW IPC6253SR-X33
      • Securicorp SCL-SDM03MVIR-WD3533X.
      • Hikvision DS-2DF8436IX-AELW, DS-2DF8236IZ-AEL, DS-2DE4220W, DS-2DE4220IW, DS-2DE7330IW-AE,DS-2DP1636ZIX-D/236
      • Vista VK2-HD30-PM
    • Analog Encoder License support for:
      • Acti V23
      • UNIVEW NVR302-16S-P16, NVR302-08S-P8
      • Sony SNT-EX104, SNT-EX154, SNT-EP154
      • Dahua DHI-HCVR7108H-V2, DHI-HCVR7108H-S2
      • Siqura EVE FOUR
      • Hikvision DS-6708
    • Input/Output fixes for:
      • Hikvision DS-2DE4A220IW-DE, DS-2CD2522FWD,DS-2CD2142FWD and OEM’ed versions, DS-6716, DS-6708
      • DWC-PF5M1TIR, DWC-MB45DiA, DWC-MV85DiA, DWC-PB6M4T
    • Ability to change image resolution and adjust bitrate (fine tuning) for::
      • Axis
      • Acti
      • Hikvision
      • ONVIF cameras
    • PTZ support added for some old Samsung cameras.
    • Hanwha NVR improvements
      • PTZ support
      • Cameras advanced settings support
      • Secondary stream for NVRs support
    • H.265 support for DWC-MTT4Wi36.
    • G.726 audio playback support.
    • G.726 and G.711 audio export to mp4 support.
    • FPS limit increased to 10 for Arecont Vision AV12275 and AV12276 cameras
    • DWC-PVX16W, DWC-PVX16W4, DWC-PVX16W6, DWC-PVX16W28, DWC-PZ21M69T multi-sensor cameras now have stitched view.
  • IMPROVEMENTS
    • Redesigned video export.
    • Vulnerability fixes.
    • EULA fixes in Windows installer and server web page.
    • If EULA is updated, it is shown once on client launch and needs to be accepted.
    • Comprehensive user manual updates.
    • Analytics event types are split into impulse and stateful.
    • Developer feedback links were removed.
    • Improved minimum firmware warning for NVR.
    • Added message ”Too many connections” for NVR in Web Client.
    • Added ”Setup password” message in Web Client.
    • Cloud Beta warning has been removed from the System Administration dialog.
    • Events are split into groups in the Event Rules dialog.
    • Added a context menu to all local system tiles on the Welcome page.
    • Improved timeline behavior when motion search is activated.
    • Separate ”Web page” tab in ”Camera Settings/Advanced” dialog.
    • Database backup performed automatically prior to merging systems.
    • If multiple cameras do not support chosen event, a warning message is displayed.
    • Improved support for multi-sensor cameras (by UI and license).
    • Screen recording is disabled for users without Export Archive permission.
    • Checkbox “Launch video wall when Windows starts” is set by default now.
    • ”Do HTTP Request” action improvements: multiple methods are supported (POST, GET, DELETE, PUT etc).
    • USB storage support. USB storage is not enabled by default but can be enabled with a parameter in config file.
    • Adaptive Scaling improvements.
    • Improved context help.
    • ”Local files” are no longer automatically expanded in the Resource Tree.
    • An administrator fetched by LDAP can now modify LDAP settings and fetch users.
  • MAC OS FIXES:
    • Improved timeline on Web Client for retina displays.
    • Improved marker fade animation when timeline panel hides.
    • Animation of the time marker for NOV files is not smooth. Fixed.
  • BUG FIXES:
    • Cloud connectivity issues on ARM devices. Fixed.
    • System time was shown in UTC instead of correct time zone. Fixed.
    • Incorrect timeline in multi-video export. Fixed.
    • License key was truncated on ”System Administration/Licenses”. Fixed.
    • Calendar showed incorrect date if client and server dates were different. Fixed.
    • It was possible to change the password for a particular channel on multi-channel devices. Fixed.
    • Links to the video were added to ”Input event” email for a camera without recording. Fixed.
    • Scene went upside down if client switched to window mode and Resource Tree was resized from maximum to minimum. Fixed.
    • ”The pipe is being closed” issue while upgrading through the installer. Fixed.
    • Manual activation link was unclickable in “System Administration/Licenses/Manual Activation”. Fixed
    • Network Storage drive could be initialized first, which was slow. Local drives are now always initialized first, which is fast, so recording starts quickly no matter what.
    • UDP multicast stream recording could stop after some time although live view was ok. Fixed.
    • Advanced settings were not shown as a web page for DW-CPRO cameras. Fixed.
    • ”No Signal” error for Hikvision 2CD6362F-I. Fixed.
    • RTSP streams from VLC as RTSP server could not be viewed in Nx. Fixed.
    • Connectivity issues with Axis cameras opened in Web Client from Cloud Admin interface. Fixed.
    • DW cameras showed ”404” error instead of web page in the ”Advanced” tab. Fixed.
    • DTV cameras caused severe memory leaks in Media Server. Fixed.
    • Cameras added as generic RTSP links reappeared instantly after removal. Fixed.
    • DWC-PB6M4T camera improperly worked after autodiscovery. Fix was tested with firmware ver. 1.0.4.030b build on 2017-01-24.
    • ”Offline” tiles could not be removed from the welcome screen. Fixed.
    • Resolution was immediately switched to low quality during fast forward and rewind regardless of CPU load. Fixed.
    • Auto-discovered NVR was shown in the Resource Tree as an unauthorized camera. Fixed.
    • Default password change was not detected in ”Camera Settings” dialog. Fixed.
    • Motion detection analytics event was not triggered on Wave for ENCODER SPE-1610s. Fixed.
    • Hanwha XRN-1610 with a new firmware (2.10) did not work in Wave. Fixed.
    • Hanwha PRN-4011 hung if Client tried to play archive from 15 channels. Fixed
    • Timeline was not displayed for Hanwha NVR with many cameras and small chunks. Fixed.
    • Server did not start on RPI. Fixed.
    • ”Enable audio” option was available for Axis cameras without audio support. Fixed.
    • Server added only a single stream from Axis Q6000. Now all four sensors can be added.
    • Archive backup bandwidth limit did not work for local drives. Fixed.
    • Server failed to add NAS with domains specified in username. Fixed.
      • Video wall improperly detected screen geometry if more than six displays were attached. Fixed.
    • Audit trail did not log unsuccessful login attempts. Fixed.
    • In multi-server systems, camera could be recorded to several servers simultaneously. Fixed.
    • Server did not add Axis P3707 camera after a successful search. Fixed.
    • Single and multi-sensor cameras played asynchronously. Fixed.
    • Different UI and user manual translation issues. Fixed.
    • Client sometimes stuck when several clients were open. Fixed.
    • ”Initialize focus” button did not work for Hanwha QND-7080. Fixed.
    • Uniview DVS4116 auto discovered information was incorrect. Fixed.
    • Axis horn speaker failed to work after upgrade to 3.1. Fixed.
    • Local time synchronization might misbehave if CPU clocks were imprecise. Fixed.
    • Multi-channel cameras had incorrect resolution in ”Information” overlay in 2×2 mode. Fixed.
    • No audio from Acti cameras of AB2L platform. Fixed.
    • Dahua DH-SD22404T-GN PTZ did not follow in-client joystick commands. Fixed.
    • Dragging zoom window between ultra-widescreen and normal camera caused aspect ratio misbehavior. Fixed.
    • Sound from some cameras was played back with distortion on high frequencies. Fixed.
    • If camera was manually added and camera IP was changed after that, camera IP was not adjusted after new manual search. Fixed.
    • Various server and client crashes fixed.
    • Slight API documentation fixes.
  • TESTED OS:
    • Windows 7
    • Windows 8
    • Windows 8.1
    • Windows 10
    • Windows Server 2008
    • Windows Server 2008 R2
    • Windows Server 2012
    • Windows Server 2012 R2
    • Windows Server 2016 v1607
    • Windows 10 Enterprise
    • Ubuntu 14.04 LTS
    • Ubuntu 16.04 LTS
    • OSX 10.11: ”El Capitan”
    • OSX 10.12: ”Sierra”
    • OSX 10.13: ”High Sierra”
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.14 (Linux 9.4 (stretch))
    • Raspberry PI 3 Model B Vi. 2 Kernel version 4.9 (Linux 8.0 (jessie))
    • Banana Pi BPI-M1/BPI-M1+ Kernel version 3.4 (Linux 8.0 (jessie))
  • KNOWN LIMITATIONS:
    • DW Analytics.
      • Events don’t work if VCA and MD events are enabled simultaneously.
      • Need to wait for 2 minutes after event is enabled on camera web page.
      • Events work for all zones but don’t work for a specific zone.
      • Events stop working if camera CPU is more than 80%.
    • DW MTT Analytics:
      • Some events do not work simultaneously on DWC-MTT series cameras.
      • Camera sends spurious notifications for some events when settings are changed.
    • Axis analytics. If Axis People Counter is enabled on Axis camera, auto and manual discovery don’t work in software. Camera issue.
    • Recorded G.726 audio with 16 Kbit bitrate is not played in archive.
    • Export H.265 to .avi is not supported.
    • Advanced Settings do not work for multi-channel cameras via NVR.

In-Client Upgrade:

Build Number: 20807
Password: 9gays7

Download Links:

 ARM
 LINUX
 MACOS
 WINDOWS

17.3.0.16043 Mobile Client
PUBLISHED 20 Sep 2017

Release Notes:

  • NEW FEATURES
    • Dewarping for Fisheye cameras is now available.
  • IMPROVEMENTS
    • Added pre-loader animation for PTZ commands.
    • Improved Server Tile status UX.
    • Other small user interface improvements and fixes.
  • BUG FIXES
    • PTZ commands were delayed when connecting via Nx Cloud. Fixed.
    • Layouts were dupilcated in some systems. Fixed.
    • Newly shared layouts were only shown after disconnecting and reconnecting. Fixed.

In-Client Upgrade:

Build Number: 16043
Password: ti7xuc

Download Links:

 ANDROID
 IOS

Wave VMS Patches

Patches are created to resolve specific issues.
If you are unsure of which patch to download and have not been directed to
this page by our support team please download the latest version of WAVE.

4.2.0.32841 Video Management System
PUBLISHED 27 Apr 2021

Release Notes:

  • ++++++ HOTFIX RELEASE IMPROVEMNTS / BUG FIXES ++++++
  • ANALYTIC BUG FIXES:
    • Fixed an issue where analytic events did not show up in the Notification Panel for Hikvision DS-2CD3T56G2-4IS on firmware V5.5.150 build 200927.
    • Instant analytic events stopped showing up in the Notification Panel after the first time they were triggered. Fixed.
  • BUG FIXES:
    • Certain sections of the desktop client had incorrectly rendered UI text on Macs with the M1 SoC. Fixed.
    • An issue caused the Server to not start on Raspberry Pi 3. Fixed.
    • The lens position and zoom level of fisheye cameras were not saved in the layout. Fixed.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
    • Added advanced PTZ support for Hikvision IPC6412LR-X5P, IPC6854SR-X38UP-VC, IPC6222E-X33UP, IPC6222EI-X22UP-C.
    • Fixed an RTP error that occurred with H.265-encoded primary streams on DW cameras.
    • Server did not use ONVIF to configure stream settings for Arecont Vision cameras from the Contera Panoramic series (AV08CPD-118, AV20CPD-118, AV8476DN, and AV20476DN) and DUO series (AV4856DN, AV10856DN, and AV16856DN). Fixed.
  • ++++++ 4.2 RELEASE NOTES ++++++
  • OPERATING SYSTEMS/PLATFORMS
    • Windows 7 compatibility support ended.
    • Windows 2008 R2 compatibility support ended.
    • Added support for MacOS 11 in the desktop client.
  • IMPROVEMENTS:
    • Added Catalan language.
    • The maximum value for pre-recording and post-recording actions in camera recording events is now 600 seconds.
    • Export dialog now uses short date and time format by default.
    • Update packages are now validated before installing to prevent malware injection.
    • Camera name and export time can now be overlayed onto the footage in the Export Dialog.
    • Camera name can now be overlayed when capturing a screenshot.
    • Exported videos in h.264 format can now be played back in Windows Media Player.
    • Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
    • The way that ROI data is overlaid on cameras was divided into two groups: ”Show Region of Interest” and ”Objects”. “Show Region of Interest” makes ROI objects visible on cameras without object tracking support if the ”Display on Video” option is enabled in Camera Settings > Plugins. “Show objects” makes ROI objects and camera analytics objects visible only on cameras that support object tracking.
    • Removed the limitation on Video Wall licenses that prevented more than one active direct control session at a time.
  • ANALYTICS IMPROVEMENTS:
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Dahua analytics plugin:
      • Models:
        • All models with supported analytics.
      • Analytics Features:
        • Added short object tracking for objects in events. The track duration is about 500ms.
        • Fast-moving
        • Parking detection
        • Loitering,
        • People gathering
        • Abandoned object detection(Left object detection)
        • Intrusion detection
        • Missing object detection
        • Tripwire detection (Cross line detection)
        • Queue size detection
        • In-area people counting
        • People flow counting
    • “Motion+: Detect any motion event” was removed from the list for Bosch analytics.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES:
    • New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
    • Encoders added to the analog list:
      • Axis q7414x
      • Abus HDCC90011
      • Advidia VP-16-V3
      • Alibi ALI-HVR5016H
      • Alumia QSS301-08-P8
      • Amcrest NV4108E-HS, AMDV8M16-H5, nv4108e-hs, AMDV10818-H5
      • Bolid RGI-1622P16
      • Bosch Videojet Multi4000
      • CBC Ganz ZN-AIBOX16
      • Dahua DH-XVR5116HE-X, DH-NVR6064, X72A3A4, dhi-nvr5208x, dhi-nvr2116x, dhi-nvr5224x, dh-nvr5432x, n41b1p2, , X51B1E, X51A3E2, C52A2N
      • Dcode DEN408-64R-B
      • EPCOM EV-5008TURBOUS, EV-1016-TURBOX
      • FLIR DNR832, DNR716
      • Grundig GRN-R2108P
      • Haitai X Mtum Co IPXM4
      • Hikvision DS-7104x, DS-7616NI-I2/16P, DS-7216HUHI-F2/N, DS-7216HWIx, DS-7216HGHIx, DS-7308HQHI-SH
      • Hunt CCTV HWS-04AD, CCTV HAR526-32, HNR32P6-16, HAR326-4, HNR32P6-16
      • InVid UN1B-16X16
      • Lorex LNR608, LNR616, N881A3
      • LunaIP L-IPR-5216-EP-4K
      • Luxon HYB163TB
      • LTS LTN8932H-P16, LTD8304K-ET, LTN8716K-P16, LTN8716T-HT
      • Nelly’s Security NSDV-208UK
      • Optio OPDVR04
      • Osiris OS-NVR8M8P-4H1-4K
      • Panasonic k-nl404k, K-NL416K
      • RVi 1HDR08K, RVi-R08MA
      • Smartec STR-HD1625
      • SecurityTronix TVR-AR314-8
      • SpecoTVI-16CH-720P-4TB-NSP, OS103T
      • Tecsar Lead 4ch1h4poe-5-sm
      • ToughDog Security TDHDX161-4K-2T
      • Tyco TYCE4C
      • UniView NVR516-128
      • Visiotech XS-XVR6116-VS2
      • Vicon VLR-ENC-16-A
      • Winic AR326-4
      • X2-CCTV-NVR-x
    • Advanced PTZ support:
      • Avigilon 2.0C-H4IRPTZ-DP30x
      • Advanced ptz mapping for DS-2DE5425IW-AE
      • Axis Q740x
      • Milesight MS-C2971x, MS-C5361x
      • Hikvision DS-2DP3236ZIXS, DS-2DF9C435IH
      • Uniview IPC6252SL-X33UP
    • Multi-sensor cameras:
      • Axis P3715PLVE
      • Avigilon 15C-H4A-3MH-270, 12W-H3-4MH-DP1-B
      • Dahua ipc-pdbw82041-b360
      • Digital Watchdog DWC-PVX16w2.
      • Digital Watchdog DWC-PVX16W*, DWC-PV2M4T, DWC-PB6M4T, DWC-PZ21M69T, DWC-PB2M4TIR
      • Hikvision DS-2PT5326IZ-DE, DS-2TD2617*
      • Hikvision DS-2CD6D52G0-IHS
      • I-View FE-6MIPS06-F01
      • Pelco IMM12018, IMM12027, IMM12036 (or Optera IMM12036?)
      • Secubest NVM2-A21
      • Secubest NVM5-520
      • Safire SF-IPPAN362HA-2Y
      • Sony SNC-WL862
      • Uniview IPC8542ER5-DUP
      • Vivotek VC8201*
    • INFRACHEN ZH-FS160 now supports signal input events.
    • Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
    • Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
    • D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
    • When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
    • Motion detection did not work for Axis M3007. Fixed.
    • VMS-20331:Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
    • Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
    • The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
    • The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
    • SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
    • Signal I/O support added for HIKVISION DS-2TD4237*.
    • The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
    • Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
    • Added I/O license support for AXIS A9188.
    • Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
    • Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
    • VIVOTEK FD9189, FD9380*, FD9388*, IT9389-HT,IB9391*, SD9362*, SD9366*, IB9387*, FD8369*,CC8370*, CC9381 failed to initialize correctly via ONVIF. Fixed.
    • Added support for Axis C1410 Network Mini Speaker.
    • Hikvision DS-2CD4A26FWD-IZHS8/P incorrectly showed support for Pan and Tilt, even though only Zoom is supported. Fixed.
    • FPS limitation for Axis Q1645 was increased to 120 fps.
  • ANALYTICS BUG FIXES:
    • VMS-20948:Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed ”Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
    • VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
    • Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
    • Notification ”Alarm detection has ended” for Dahua analytics cameras appeared only when the server stopped. Fixed.
    • Only the first 5 rules for Dahua analytics worked. Fixed.
    • Cropped thumbnails of analytics objects were shown in the Notification Panel if ”Disable secondary stream” was enabled. Fixed.
    • Analytics events were not available for VIVOTEK cameras with firmware 2.2002.23.01. Fixed.
  • BUG FIXES:
    • In some cases, Cloud system tiles on the Welcome Screen would intermittently switch between an offline and online status. Fixed.
    • Live view in Web Admin did not work in Safari. Fixed.
    • CPU usage significantly increased on AWS EC2 instances with ELB enabled and TCP/UDP port 7001 configured as a listener. Fixed.
    • Unable to view live camera streams or archived video on the Cloud client due to an ”Internal Server Error 500”. Fixed.
    • The ”On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
    • The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
    • PTZ tours would stop when activated on more than one camera at a time. Fixed.
    • Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
    • Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
    • The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
    • The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports even if the camera does not support audio at all. Fixed.
    • The ”Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
    • Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
    • The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
    • Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
    • On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
    • In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
    • Failover did not work with cameras that were manually added to the System. Fixed.
    • Auto-Discovery could not detect some ONVIF cameras. Fixed.
    • Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
    • The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
    • The ”Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
    • Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
    • Exported video duration was incorrect. Fixed.
    • PTZ tours were not displayed in the context menu. Fixed.
    • Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
    • On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
    • The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
    • Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
    • Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
    • The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
    • Screenshots from multisensor cameras included the image from only one sensor. Fixed.
    • Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
    • The option ”Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
    • Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
    • When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
    • The right side of the overlay in exported videos would get cut off. Fixed.
    • Storage credentials were not encrypted in the Server log. Fixed.
    • DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
    • Fixed an issue where some actions did not sync properly between Servers.
    • The ”Camera IP conflict” event did not work when triggered. Fixed.
    • Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name ”General”.
    • I/O module license failover did not work. Fixed.
    • Fixed an issue with the Chinese translation on the “Storage Management” and “Storage analysis” dialogs.
    • The Server tried to get storage space information about a DVD drive. Fixed.
    • Users without the appropriate permissions were able to access the Server Monitor. Fixed.
    • Sometimes the desktop client would crash when opening local files. Fixed.
    • Two systems with enabled secure connection could not be merged in web admin. Fixed.
    • Fixed several server and desktop client crashes.
  • API/SDK CHANGES/FIXES
    • Added an option for users to change bounding box colors for some analytics objects in compatible Plugins.
    • The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
    • Added new URL parameters for exporting over the /media method.
    • RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
    • A new web browser session identifier will be generated every time before the session is established.
    • SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
    • Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.
    • Added new URL parameters to the /media method: stream, duration, and mkv.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
    • Hanwha analytics plugin improvements and fixes:
      • Added support for Box Temperature Detection for Hanwha thermal cameras.
      • Added a possibility to choose a face bounding box color for Mask tracking.
      • The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
      • Fixed a memory leak caused by malformed object tracking metadata from a Hanwha camera, which consumed all available RAM and froze the Server.
      • Analytics events for PND-A9081RV displayed a thumbnail of the entire camera view instead of best shot.Fixed.
      • Sometimes updated ROI settings did not apply when saved.Fixed.
    • Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
    • The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.
  • TESTED OPERATING SYSTEMS:
    • Windows 7, 8, 8.1, 10/Enterprise, 2008 R2, 2012, 2012 R2, 2016 v1607, 2019
    • Ubuntu LTS: 16.04, 18.04, 20.04
    • MacOS 10.14: “Mojave”, 10.15 “Catalina”, 11.0
    • Raspberry PI 3 Model B V1.2 Kernel version 4.14 (Linux 9.4 (Stretch)).
  • KNOWN LIMITATIONS:
    • Due to a firmware issue affecting Bosch cameras, sometimes events are triggered but not shown in the desktop client.
    • Hardware decoding doesn’t work on PC-based Ubuntu systems.
    • Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
    • ”Error 404. Cannot find the page. Check the URL and try again” shows up on the Web Page tab in Camera Settings for Hanwha NVRs. The web page will be correctly displayed after users click “OK”.

In-Client Upgrade:

Build Number: 32841
Password: 1qrqud

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.1.0.32602 Video Management System
PUBLISHED 09 Mar 2021

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.1 patches.
  • ANALYTICS IMPROVEMENTS/FIXES
    • Fixed an HTTP authentication issue between the server and VIVOTEK VCA plugin.
  • IMPROVEMENTS
    • Added Catalan language.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Supported Devices:
      • AXIS I8016, P1455, AXIS P3247, AXIS P3248, P3255, AXIS Q6100, Q6135, Q8752, V5925
    • Encoders added to the analog list:
      • Advidia VP-16-V2
      • CBC Ganz ZN-AIBOX4
      • Dahua XVR5108x, X51B1E, DHI-HCVR4216AS3, DHI-NVR2108x, C52A2N, X51A3E2
      • EZ-IP EZIP-NVR2A08HSx
      • Hanwha SPE-16x
      • LOREX D861A8
      • Onix TVIMR32
      • UniView NVR516x
    • Multi-sensor Cameras
      • Axis Q6010x
    • Avigilon H3M experienced intermittent signal issues due to the ”Cannot modify default profile” ONVIF error. Fixed.
    • Added support for Axis C1410 Network Mini Speaker.
    • FPS limitation for Axis Q1645 was increased to 120 fps.
    • Hanhwa LND-6010R, LNV-6010R, LNO-6010R, and XNO-6010R failed to initialize correctly via ONVIF. Fixed.
    • AXIS A9188 I/O ports displayed in the wrong order in the desktop client. Fixed.
  • BUG FIXES
    • Archived video encoded with H.264 codec and exported to .NOV or .EXE would freeze at 99% during the export process. Fixed.
    • Users without the appropriate permissions were able to access the Server Monitor. Fixed.
    • The Server tried to query storage space information about a DVD drive. Fixed.
    • Cloud merge would not work for clients with only port 443 open and required port 80 to be open too. Fixed.
    • Fixed a memory leak on Ubuntu servers caused by mismatching RTP packet timestamps.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES:
    • Hanwha analytics plugin fixes:
      • An error occured when trying to save changes to the ROI settings for Hanwha Q series and X series cameras. Fixed.
      • The server could not receive IVA analytics from cameras on Hanwha NVRs due to improper configuration. Fixed.

In-Client Upgrade:

Build Number: 32602
Password: lf4178

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.1.0.32404 Video Management System
PUBLISHED 17 Jan 2021

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.1 patches.
  • ANALYTICS IMPROVEMENTS/FIXES
    • Hanwha analytics:
      • Fixed a memory leak caused by malformed object tracking metadata from CAMERA which consumed all available RAM and froze the Server.
      • The analytics feature “Temperature Change Detection” has been renamed to “Box Temperature Detection”.
      • The bounding box color selection did not work correctly when Face Mask Detection was enabled and set to “No Mask”.
      • Analytics events for PND-A9081RV display a thumbnail of the entire camera view instead of best shot.
      • The box selection preview for the Stub plugin and Hanwha Box Temperature Detection analytics would sometimes incorrectly snap to the upper part of the boundary.
      • Fixed an issue where the default negative value for Threshold Temperature in Temperature Change Detection could not be replaced with a value entered using a keyboard.
    • Dahua analytics. Tiles in the objects tab had a thumbnail that didn’t match the associated section in the timeline. Fixed.
  • IMPROVEMENTS
    • Notifications generated by Start/Stop events are now labeled with either “Started“ or “Stopped” to differentiate them from one another.
    • Fixed an issue where an Edge server and PC server were unable to merge with one another.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Abus HDCC90011
      • Advidia VP-16-V3
      • Alibi ALI-HVR5016H
      • Alumia QSS301-08-P8
      • Amcrest AMDV10818-H5
      • Bolid RGI-1622P16
      • Dahua DH-XVR5116HE-X, DH-NVR6064, X72A3A4
      • Dcode DEN408-64R-B
      • EPCOM EV-5008TURBOUS, EV-1016-TURBOX
      • FLIR DNR832
      • Haitai X Mtum Co IPXM4
      • Hikvision DS-7308HQHI-SH
      • Hunt CCTV HAR526-32, HNR32P6-16, HAR326-4, HNR32P6-16
      • InVid UN1B-16X16
      • Lorex LNR608, LNR616, N881A3
      • LTS LTD8304K-ET, LTN8716K-P16, LTN8716T-HT
      • LunaIP L-IPR-5216-EP-4K
      • Luxon HYB163TB
      • Nelly’s Security NSDV-208UK
      • Panasonic K-NL416K
      • SecurityTronix TVR-AR314-8
      • SpecoTVI-16CH-720P-4TB-NSP, OS103T
      • ToughDog Security TDHDX161-4K-2T
      • Tyco TYCE4C
      • UniView NVR516-128
      • Visiotech XS-XVR6116-VS2
    • Advanced PTZ support:
      • Hikvision DS-2DP3236ZIXS
    • Multi-sensor Cameras
      • Avigilon 15C-H4A-3MH-270, 12W-H3-4MH-DP1-B
      • Hikvision DS-2CD6D52G0-IHS
      • I-View FE-6MIPS06-F01
      • Secubest NVM5-520
      • Safire SF-IPPAN362HA-2Y
      • Sony SNC-WL862
    • Arecont Vision AV08CPD-118 panoramic camera displayed the wrong sensor order in the desktop client. Fixed.
    • Added I/O license support for AXIS A9188.
    • Improved Advanced PTZ for MS-C2971.
    • Enabled zoom controls for ACTi A416, A418, A811, and A818 via ONVIF.
  • BUG FIXES
    • Unable to view live camera streams or playback archived video on the Cloud client due to an ”Internal Server Error 500”. Fixed.
    • The ”On Camera disconnected” Event Rule did not work if autodiscovery was turned off. Fixed.
    • The Desktop Client compatibility mode from VMS 4.1 patch to VMS 4.1 release did not work on some versions of Ubuntu and MacOS. Fixed.
    • Exporting a video would fail if the file name was longer than 200 characters. The issue has been fixed by automatically shortening file names to meet the 200 character limit. Fixed.
    • The start time of local files longer than 1 hour added to the layout would shift based on the UTC time zone. Fixed.
    • Deleted cameras would sometimes be automatically re-added as an offline camera. Fixed.
    • PTZ tours would stop when activated on more than one camera at a time. Fixed.
    • Fixed an issue where the Server’s storage became inaccessible after updating the Server to 4.1.
    • A memory leak in the Advanced Camera Settings for PNF-9010R would cause the desktop client to freeze. Fixed.
    • Watermark validation failed when checking exported videos that contain a text overlay. Fixed.
    • The Server had an issue initializing some Vivotek cameras due to their implementation of ONVIF media and media2 profiles. Fixed.
    • The warning banner that alerts users of the potential audio/video desynchronization when exporting to AVI also showed up on AVI exports that did not have any audio. Fixed.

In-Client Upgrade:

Build Number: 32404
Password: hykmlc

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.1.0.32212 Video Management System
PUBLISHED 10 Dec 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.1 patches.
  • ANALYTICS IMPROVEMENTS/FIXES
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Dahua analytics plugin:
      • Models:
        • All models with supported analytics.
      • Analytics Features:
        • Added short object tracking for objects in events. The track duration is about 500ms.
        • Fast-moving
        • Parking detection
        • Loitering,
        • People gathering
        • Abandoned object detection(Left object detection)
        • Intrusion detection
        • Missing object detection
        • Tripwire detection (Cross line detection)
    • (Introduced in 4.1.0.31945-7) VIVOTEK analytics plugin: An internal error would occur when enabling Smart Motion Detection without Smart VCA. Desktop Client would display the error if the System had an enabled analytics event rule that sends desktop notifications. Fixed.
    • (Introduced in 4.1.0.31945-7) Hikvision analytics plugin: Hikvision DS-2CD2365G1-I displayed ”Temperature” object types in the Objects tab even though it is not a thermal camera. Fixed.
  • IMPROVEMENTS
    • Export dialog now uses short date and time format by default instead of long date and time format.
    • Update packages are now validated before installing to prevent malware injection.
    • Camera name and export time can now be overlayed onto the footage in the Export Dialog.
    • Camera name can now be overlayed when capturing a screenshot.
    • Server will re-initialize cameras when packets are not received from the secondary stream for more than 10 seconds.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Amcrest NV4108E-HS, AMDV8M16-H5
      • CBC Ganz ZN-AIBOX16
      • Grundig GRN-R2108P
      • FLIR DNR716
      • Hikvision DS-7104x, DS-7616NI-I2/16P
      • Hunt CCTV HWS-04AD
      • LTS LTN8932H-P16
      • Optio OPDVR04
      • Osiris OS-NVR8M8P-4H1-4K
      • RVi 1HDR08K, RVi-R08MA
      • Smartec STR-HD1625
      • Vicon VLR-ENC-16-A
      • Winic AR326-4
    • Advanced PTZ support:
      • Axis Q740x
      • Milesight MS-C2971x, MS-C5361x
    • Multi-sensor Cameras
      • Digital Watchdog DWC-PVX16W*, DWC-PV2M4T, DWC-PB6M4T, DWC-PZ21M69T, DWC-PB2M4TIR
      • Pelco IMM12018, IMM12027, IMM12036 (or Optera IMM12036?)
      • Secubest NVM2-A21
      • Uniview IPC8542ER5-DUP
      • Vivotek VC8201*
      • Hikvision DS-2PT5326IZ-DE, DS-2TD2617*
    • SNP-3120 failed to connect to the Server due to a resource initialization error. Fixed.
    • Signal I/O support added for HIKVISION DS-2TD4237*.
    • The Server could not play the RTSP streams from the following Hanwha cameras: LND-6011R, LNV-6011R, and LNO-6011R. Fixed.
    • (Introduced in 4.1.0.31945-7) The Web Page tab in Camera Settings for DWC-MPTZ5X would not load. Fixed.
  • BUG FIXES
    • On some Linux-based Systems, the Server would automatically select a storage drive without the necessary permissions to store analytics data. Fixed.
    • The Server did not close HTTP and RTSP streams if crucial user properties were modified. Fixed.
    • Transcoding failed to occur when exporting footage that used more than one codec. Fixed.
    • Events configured to send an email to multiple users would send the wrong number of emails when triggered. Fixed.
    • (Introduced in 4.1.0.31945-7) The camera name and timestamp text overlays would sometimes overlap one another on screenshots. Fixed.
    • (Introduced in 4.1.0.31945-7) Screenshots from multisensor cameras included the image from only one sensor. Fixed.
    • (Introduced in 4.1.0.31945-7) Saving screenshots from cameras with long names would cause the Desktop Client on Linux to crash. Fixed.
    • (Introduced in 4.1.0.31945-7) The option ”Play audio from all cameras on layout” in Local Settings did not work correctly. Fixed.
    • (Introduced in 4.1.0.31945-7) Desktop Client on Mac OS would crash when opening the Export dialog. Fixed.
    • (Introduced in 4.1.0.31945-7) When low on storage space, the Server would delete all prior backups instead of just the oldest backups to free up space for a new Server backup. Fixed.
    • (Introduced in 4.1.0.31945-7) The right side of the overlay in exported videos would get cut off. Fixed.
    • (Introduced in 4.1.0.31945-7) Storage credentials were not encrypted in the Server log. Fixed.
    • (Introduced in 4.1.0.31945-7) DW cameras did not display some camera parameters in the Web Page tab in Camera Settings. Fixed.
    • (Introduced in 4.1.0.31945-7) Fixed an issue where some actions did not sync properly between Servers.
    • (Introduced in 4.1.0.31945-7) The ”Camera IP conflict” event did not work when triggered. Fixed.
    • (Introduced in 4.1.0.31945-7) Fixed an issue where camera vendor and model in Camera Settings were swapped for devices with the model name ”General”.
  • API/SDK CHANGES/FIXES
    • The “cameraId” parameter is added to the documentation for /ec2/analyticsTrackBestShot.
    • (Introduced in 4.1.0.31945-7) Added new URL parameters for exporting over the /media method.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • Hanwha analytics plugin improvements and fixes:
      • The IVA Area region number will now be shown in notifications for analytic events that include IVA Areas (Intrusion, Enter, Exit, Appear, Loitering).
      • Added support for Tampering Detection.
      • Added support for Temperature Change Detection for Hanwha thermal cameras.
      • An error would occur when trying to delete Temperature Change Detection areas. Fixed.
      • Sometimes updated ROI settings did not apply when saved.
    • Sometimes the PTZ functionality on some Hanwha cameras did not work correctly if the video was flipped and mirrored. Fixed.
    • The Web Page tab in Camera Settings for XRN-1610S did not display the correct web page. Fixed.

In-Client Upgrade:

Build Number: 32212
Password: d78h3e

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.1.0.32045 Video Management System
PUBLISHED 10 Nov 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.1 patches.
  • IMPROVEMENTS
    • (compared to the latest 4.1 patch) The maximum value for pre-recording and post-recording actions in camera recording events can now be set up to 600 seconds.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New BCS Line cameras supported: BCS-TIP5201, BCS-V-TI236x
    • Encoders added to the analog list:
      • Hikvision DS-7216HUHI-F2/N, DS-7216HWIx, DS-7216HGHIx
      • Dahua dhi-nvr5208x, dhi-nvr2116x, dhi-nvr5224x, dh-nvr5432x, n41b1p2
      • X2-CCTV-NVR-x
      • Bosch Videojet Multi4000
      • Axis q7414x
      • Panasonic k-nl404k
      • Amcrest nv4108e-hs
      • Tecsar Lead 4ch1h4poe-5-sm
    • Advanced PTZ support:
      • Avigilon 2.0C-H4IRPTZ-DP30x
      • Advanced ptz mapping for DS-2DE5425IW-AE
    • Multi-sensor cameras:
      • Dahua ipc-pdbw82041-b360
      • Digital Watchdog DWC-PVX16w2.
    • INFRACHEN ZH-FS160 now supports signal input events.
    • Edge recording for Lilin Z2R8022EX25 did not work correctly. Fixed.
    • Honeywell HEW2PR(W)1 experienced stream signal loss issues. Fixed.
    • D-Link DCS-8526LH had problems with its video stream in the VMS. Fixed.
    • When listening to the archived footage on Axis speakers, the audio was played for 10-20 seconds and then switched to Live. Fixed.
    • (Introduced in the latest 4.1 patch): Motion detection did not work for Axis M3007. Fixed.
    • (Introduced in the latest 4.1 patch) Hikvision DS-2CD4A26FWD-IZHS8/P MPEG audio did not work when sampling rate was set to 44.1 kHz. Fixed.
    • (Introduced in the latest 4.1 patch) Auto-Discovery could not detect AXIS P3715(PLVE). Fixed.
    • (Introduced in the latest 4.1 patch) The Web Page tab in Camera Settings did not work for DWC-MPTZ5X. Fixed.
  • BUG FIXES
    • The ”Camera/Device Disconnected” email notification was mistakenly sent when LDAP users exited the Desktop client. Fixed.
    • Stream jumped to the first frame when creating a zoom window on the exported video (nov and exe). Fixed.
    • The Server could not discover Axis cameras with HTTPS enabled and HTTP. Fixed.
    • Video export failed if the recorded archive was written on multiple servers in the System. Fixed.
    • On Ubuntu systems, USB storage could be used to store the Analytics DB even if the Server did not have write permissions. Fixed.
    • In some network environments, WebAdmin reported “No Networking” even if it was accessed from a different computer. Fixed.
    • Failover did not work with cameras that were manually added to the System. Fixed.
    • (Introduced in the latest 4.1 patch) Auto-Discovery could not detect some ONVIF cameras. Fixed.
    • (Introduced in the latest 4.1 patch) Panic recording worked incorrectly for Input Signal on 2 cameras. Fixed.
    • (Introduced in the latest 4.1 patch) The recording quality for Hanwha cameras would be set incorrectly when the FPS value was set to 1. Fixed.
    • (Introduced in the latest 4.1 patch) The ”Storage is not configured” notification was shown for Advanced Viewers even though they did not have the appropriate permissions in the Desktop client. Fixed.
    • (Introduced in the latest 4.1 patch) Failed to connect to a large cloud-connected System on the Desktop/Mobile client due to a data bandwidth limitation between servers. Fixed.
    • (Introduced in the latest 4.1 patch) Exported video duration was incorrect. Fixed.
    • (Introduced in the latest 4.1 patch) PTZ tours were not displayed in the context menu. Fixed.
    • (Introduced in the latest 4.1 patch) Web pages did not load if open more than 12 web pages in Desktop Client. Fixed.
  • API/SDK CHANGES/FIXES
    • RTSP stream from Server taken via API could not be played back in VLC player. Fixed.
    • A new web browser session identifier will be generated every time before the session is established.
    • (Introduced in the latest 4.1 patch) SMTP password was scrambled after setting it up via API call api/systemSettings?smtpPassword=<password>. Fixed.
    • (Introduced in the latest 4.1 patch) Incorrect data was returned to the /ec2/getStatisticsReport request for Hanwha cameras. The value for the defaultCredentials field was true even if the password on the camera was not default. Fixed.

In-Client Upgrade:

Build Number: 32045
Password: pjz18g

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.1.0.31767 Video Management System
PUBLISHED 10 Sep 2020

Release Notes:

  • NEW FEATURES
    • Redesigned PTZ controls – PTZ control have been redesigned for improved UX. To enable the new PTZ user interface go to Local Settings in the Desktop Client and uncheck the ”Show aim overlay for PTZ cameras” checkbox.
    • Intel® Quick Sync Video – Intel® Quick Sync Video uses the dedicated media processing capabilities of Intel® Graphics Technology to decode and encode fast, enabling the processor to complete other tasks and improving system responsiveness. Vastly improves the ability of low power hardware (e.g. Intel Atom, Celeron) and the ability of the Desktop Client to decode very high resolution (e.g. 16 MP, 32MP) cameras and streams.
      • Go to Local Settings in the Desktop Client and check the “Use Hardware Video Decoding” checkbox to enable Intel Quick Sync Video.
      • “Use Hardware Video Decoding” is unchecked by default.
    • Fisheye lens projection options – Improve fisheye dewarping precision by selecting the most suitable lens projection type:
      • Equisolid
      • Equidistant
      • Stereographic.
  • ANALYTICS IMPROVEMENTS
    • The following models and analytics features should be supported but have not been exhaustively tested. Please test with your device(s) before implementing this patch:
    • Vivotek analytics plugin:
      • Models: See https://www.vivotek.com/learning/feature-article/24/smart-vca; as of this patch release, the available models consists of the following:
        • Fixed Dome Cameras: FD9165-HTx, FD9365-xHTVx, FD9391-EHTV, FD9187-Hx, FD9387-xHx,FD9189-Hx, FD9389-xHx, IT9389-Hx
        • Bullet Cameras: IB9365-xHTx, IB9391-EHT, IB9387-xHx, IB9389-xHx
        • 360° Cameras: FE9191, FE9391-EV, FE9382-EHV-v2
        • 180° Cameras: MS9321-EHV, MS9390-HV
        • Mobile Dome Cameras: MD9561-H, MD9581-H
      • Analytics Features:
        • Added ROI support and object tracking
        • Crowd detection
        • Intrusion detection
        • Line crossing
        • Loitering detection
        • Missing object
        • Running detection
        • Unattended object
        • Face detection (for some cameras, such as FD9165-HT)
      • Tested devices: FE9191, FD9165-HT
    • Hikvision Thermal Analytics plugin:
      • Models:
        • Hikvision Thermal cameras
      • Analytics Features:
        • Object tracking
        • Thermal alarm
        • Thermal pre-alarm
        • Thermal regions group
        • Thermal alarm for region 1/2/3/4
        • Thermal pre-alarm for region 1/2/3/4
      • Tested devices: DS-2TD1217B-6/PA (FW V5.5.24 build 200212), DS-2TD2117-3/V1 (FW V5.5.16 build 190429), DS-2TD1217-6/V1 (FW V5.5.18 build 191202).
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Axis Cameras supported: AXISP3715, AXISD201-S, AXISD101-S
    • New Arecont Vision Cameras supported: AV2756, AV12CPD
    • Encoders added to the analog list:
      • Bosch VIP X1 XF E
      • Dahua XVR5104x, DHI-NVR4208-8p-4ks2, DH-HCVR5216an-s3, x51a3e
      • Eneo XPM16
      • Geovision GV-VS2800, GV-VS2420, GV-VS21600
      • Hikvision DS-7216x
      • Siqura S-64 E
      • Truen co., ltd. TCS-3000
    • Multi-Sensor cameras:
      • Hikvision DS-2PT5326x, DS-2PT3122x
    • Advanced PTZ Support for:
      • Dahua SD59430U-HNI
      • Digital Watchdog DWC-MPTZ336x, DWC-MPTZ830x
      • Hikvision DS-2DP1636ZIX-D/250
      • Panasonic WV-S6130
    • The initialization time for some cameras has been improved.
    • Axis T8311 joystick would stop working after using 2Way audio on a PTZ camera. Fixed.
    • The incorrect stream resolution was displayed for the MIT Professional 2MP camera. Fixed.
    • Some camera models from Sony, Huawei, SMAX, Edimax, and A-MTK had configuration issues that caused the live stream to intermittently stop. Fixed.
    • Signal output did not work on Hikvision DS-7732NI-I4. Fixed.
    • Fixed an issue with 2-way audio for Uniview cameras.
    • Fixed a streaming issue for HIKVISION DVR DS-9632NI-I8.
    • Fixed an issue detecting the input signal for AMTK AH5583T.
    • MP2L2 codec is now supported on Hikvision cameras.
  • IMPROVEMENTS
    • ”Allow only secure connections” (HTTPS traffic only) is turned on by default.
    • The limitations for pre- and post-recording are changed in Camera Settings: 90s for pre-recording and 300s for post-recording.
    • The in-client web browser now saves user credentials between browser sessions.
    • Added TLS support for LDAP on Linux-based systems.
    • Hotkeys changes:
      • [+] [−] keys are no longer used to zoom in or out on the Layout.
      • Shift + arrow keys are now used to select a camera on the Layout.
    • C2P cameras now require one analog encoder license per channel.
  • BUG FIXES
    • The FPS of a live stream would drop if a third-party software used the RTSP API to pull the stream from the Server. Fixed.
    • A fix for the error “Storage Issue: Analytics storage DB error. Insufficient permissions on the mount point” was made available. Enable the “forceAnalyticsDbStoragePermissons” advanced option from the WebAdmin interface to apply the fix.
    • The Desktop Client would crash if a microphone was disconnected during a 2-way audio session. Fixed.
    • There was no option to disable audio on a camera when ”Allow System to optimize camera settings” was unchecked in System Administration. Fixed.
    • Fixed the GUI glitch that occurred when creating a new role in the User Roles dialog.
    • Adding a Virtual Camera and searching for a camera manually were not recorded in the Audit Trail. Fixed.
    • On Ubuntu, the scheduled backup didn’t start as expected if the VMS time was configured manually. Fixed.
    • Fixed an issue with WebAdmin and Cloud Portal availability for a system with 1000 cameras when accessed outside the network.
    • The overlay settings for Axis cameras in the ”Advanced” tab didn’t work without reopening the camera. Fixed.
    • The Server returned an invalid thumbnail for the streams with B-frames. Fixed.
    • In some rare instances the Server would freeze. Fixed.
    • No motion was detected on multi-sensor panoramic cameras when “Force motion detection for stream” was enabled and set to Primary and ”Disable secondary stream” was checked. Fixed.
    • “Restore from backup” was redesigned to be more straight-forward for Cloud-merged Systems.
    • The notification ”Storage is not configured” disappeared when the Desktop Client was restarted. Fixed.
    • Media Server did not destroy the DeviceAgent on camera disconnect
    • Media Server improperly returned 500 for the correct ec2/analyticsLookupObjectTracks request. Fixed.
  • API/SDK CHANGES/FIXES
    • Metadata SDK:
      • Added a method for plugins to get the Server’s built-in SDK version.
      • Performing a text search for object type in the Desktop Client led to analytics metadata not working properly during playback. Fixed.
      • Metadata was received from Stub Analytics Plugin only after Server restart. Fixed.
      • When a plugin is enabled on a camera, and its settings are saved by pressing the ”OK” button, settings values were not updated in GUI when the plugin setting dialog is being opened again. Fixed.
      • Stub Analytics Plugin: throwPluginDiagnosticEventsFromDeviceAgent setting was renamed to throwPluginDiagnosticEventsFromEngine.
    • API:
      • Fixed the API documentation for the getCamerasEx method. Removed the “cameraName” and “cameraId” fields.
      • /api/getEvents return codes updated.
  • KNOWN ISSUES
    • Hardware decoding doesn’t work on Ubuntu.
    • Hardware decoding is disabled, if there are 2 graphic adapters and the primary is not Intel®. In this case users should set up a “primary display” to Intel® adapter to make hardware acceleration work.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • Hanwha XND-6010 did not have audio in archived footage when the audio codec was set to G.726. Fixed.
    • Hanwha cameras were inaccessible from the Desktop Client if a password containing “%” was used. Fixed.
    • Level ‘Middle’ for BLC, WDR mode for Hanwha cameras couldn’t be applied via the Desktop Client. Fixed.
    • Hanwha Analytics Plugin improvements:
      • Best shot images in the right panel are now identical to the ones in the camera’s web interface.
      • Mask detection event added.
      • Added separate events for Object tracking type events (Face tracking, License Plate tracking, Person tracking, Vehicle tracking).
      • Description of the events is filled with the attributes’ names and their values.
      • Added a possibility to filter events by attribute:value pair.
      • Fixed an issue in the Hanwha analytics description field.

In-Client Upgrade:

Build Number: 31767
Password: l2eyxl

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.31274 Video Management System
PUBLISHED 07 Jul 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.0 patches.
  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 LTS is no longer supported due to the official end of life that occurred in April 2019. Please upgrade to Ubuntu 16.04 LTS or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32-Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
  • ++++++++++++ 4.0.0.31274 (be38b1cde29ad8bbcd67) ++++++++++++
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • 3xLOGIC V250-4-SMBK family
      • ACTi V31,
      • Axis P8221,
      • Bosch VIP X16 XF E,
      • Dahua DHI-NVR5208-4KS2, DH-NVR5216-4K, DHI-NVR5432x, DHI-NVR608-64-4KS2, DHI-XVR5216A,
      • Digimerge DV916
      • Digital Watchdog STR-HD1625, VLR-ENC-16-A
      • Epcom S08-TURBO-X
      • Hikvision DS-7216HQHI-F2, DS-7208HGHI-SH, DS-7208HGHI-SH/A(B),
      • Hunt CCTV HAR314-4,
      • Interlogix TVE-820
      • Sampo DR-TW2516A
      • Siqura S-64 E V2, S-64 E V2-XT
      • Vip Vision NVR16PRO7,
      • X-Security XS-XVR6116-VS2
    • New Supported Devices:
      • Arecont Vision AV20975x, AV12975x, AV12976x, AV10856x, AV8476x, AV5426x, AV5456x, AV20476x, AV4856x, AV5756x
      • Axis Q6010, P3925, 3935, D201-S, D101-A
      • Network Digital Video B1210DM
      • Secula SCI-04DA01
    • Multi-Sensor cameras:
      • 3xLogic VX-8S-180-AWD
      • Avigilon 24C-H4A-3MH-270
      • IC Realtime IPEL-M60F-IRW1
    • Advanced PTZ Support for:
      • Milesight MS-C2942-RB, MS-C8241-X36RPB, MS-C5361-EPB
      • Fixed wrong mapping for GV-SD3732x, GV-SD2722x.
    • Motion was continuously detected on DWC-PB6M4T with OSD enabled. Fixed.
  • BUG FIXES
    • In certain environments, Server stopped detecting motion after some time running and occurs until the server is restarted.
    • System showed up as unreachable on the Desktop client but is available. Fixed.
    • Bookmarks were not placed on the timeline for Generic Events with fixed duration disabled. Fixed.
  • API/SDK CHANGES/FIXES
    • Servers on Linux machines with Analytics Plugins (built via the SDK) enabled would crash while being shut down. Fixed.

In-Client Upgrade:

Build Number: 31274
Password: t1u71t

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.31038 Video Management System
PUBLISHED 29 May 2020

Release Notes:

  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 LTS is no longer supported due to official end of life occurred in April 2019. Please upgrade to Ubuntu 16.04 LTS or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
  • ++++++++++++ 4.0.0.31038 (4b19fda132cc374802cb79f844c4236d82672dbb) +++++++++++
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • March Networks Edge16e
    • Advanced PTZ Support for:
      • HikvisionDS-2DE4A320x, Hikvision|DS-2DE4A225x, Hikvision|DS-2DE4A425x
      • Milesight MS-C5361x
      • VMS-18431 – Fixed PTZ mapping for GV-SD2722-IR GV-SD3732-IR.
    • New devices supported:
      • Axis Q9216, M3066, M3065, M3064, M3068, M3067, M3075, P5654
      • Arecont Vision AV10856x, AV8476x, AV5426x, AV2756x, AV5456x, AV20476x, AV16856x, AV4856x, AV5756x
      • ICRealtime ICIP-PANO-A007, ICIP-T802-I.
    • Input signal did not work on HIKVISION DS-2CD2742FWD-IZS. Fixed.
    • VideoTec UCHD-30x-VT had interruptions while receiving RTP over multicast. Fixed.
  • BUG FIXES
    • Aspect ratio was set incorrectly from streams sent from iPhone (iOS 13) using the DW Witness plugin. Fixed.
  • API CHANGES/FIXES
    • Server returned 500 and printed ERROR ASSERT on the ec2/saveUsers command without the “id” parameter. Documentation changed – ”id” parameter is described as mandatory for ”ec2/saveUsers” now.

In-Client Upgrade:

Build Number: 31038
Password: d98vcu

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.30917 Video Management System
PUBLISHED 01 May 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.0 patches.
  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 LTS is no longer supported due to official end of life occurred in April 2019. Please upgrade to Ubuntu 16.04 LTS or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Axis Q7424x
      • AvertX 438ir
      • Bosch VIP-X16x
      • Dahua DH-NVR4208-8P-4K, DH-NVR4832-4K, DHI-NVR5216-4KS2,
  • DHI-NVR5424x, DH-NVR608-32-4KS2
    • Hikvision DS-7216x, DS-7316HQHI-F4/N
    • IC Realtime NVR7000K
    • March Networks Edge 16e
    • Merit LILIN VS212
    • RAS Security DVR08CVI-4K
    • Siqura S-64 E V2
    • ToughDog Security TDHDX161-4K-2T
    • Vip Vision NVR8PRO7
    • Winic AR304-4.
    • Advanced PTZ Support for:
      • Hikvision DS-2DE4215IWx and DS-2DE4A215IWx
    • Fixed unexpected WAVE XRN encoder sensors change.
  • IMPROVEMENTS
    • Cloud connectivity improved.
    • Offline activation form can display a custom link to help users find a local distributor.
    • Introduced a new setting that allows setting virtual camera Time Zones to the client’s local time or the virtual camera’s recorded time.
  • BUG FIXES
    • Fixed memory leak caused by transcoded video download over API calls.
    • USB webcams were not successfully auto-discovered on servers installed on Ubuntu. Fixed.
    • Fixed unsupported audio on USB cameras on Ubuntu.
    • Virtual Camera could not display files recorded by iPhones on the Timeline properly. Fixed.
  • API CHANGES/FIXES
    • SDKs: improvements to readme.md and Doxygen documentation.
    • SDKs: improvements to sample building scripts:
      • Implemented command-line help (`-h`|`–help`|`/?`).
      • Added `–release` command-line arg to build Release configuration instead of Debug.
      • For MSVC, removed forcing the old MSVC2015 compiler (v140 toolset).

In-Client Upgrade:

Build Number: 30917
Password: h90ogx

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.30707 Video Management System
PUBLISHED 06 Apr 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.0 patches.
  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 is no longer supported due to official end of life in April 2019. Please upgrade to Ubuntu 16 or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Alibi ALI-QVR3004H, ALI-QVR3008H
      • Amcrest NV4432-HS
      • Dahua DHI-HCVR72*AN-4M, DH-XVR5216AN-4KL-X, DHI-NVR616D-128-4KS2, ITSE0804-GN5B-D, N42B2P2
      • Digital Watchdog DW-ENHD16, DW-EN4K16
      • EdgeHandler EHA200
      • ENS Security NVR302A-16-4KS2
      • Hikvision DS-6704HWI, DS-7608NI
      • Honeywell HRGX81
      • Interlogix TVE-420
      • Ocean CCTV DR-TW1516E
      • RVi 1HDR16K, IPN16/2-PRO-4K
      • Vista VIPER-HDAENC16
      • Winic NR32P6-16.
    • Advanced PTZ Support for:
      • Vivotek SD9374*
      • Hikvision DS-2DF8236
      • Milesight MS-C5341*.
    • Hikvision DS-2TD1217 signal input was triggered but didn’t have any action in the VMS. Fixed.
  • IMPROVEMENTS
    • Now it is possible to disable port 80 on firewalls completely and use port 443 and HTTPS connection.
    • Mac OS client performance optimizations.
  • BUG FIXES
    • export from cameras with resolution 8MP and greater when transcoding was applied resulted in a broken output file. Fixed.
    • Fix possible memory leaks.
    • Server stability improved.
  • API CHANGES/FIXES
    • VMS-16738: Added licensing-related Server API methods to the API documentation.
    • Improved the description of multiple ”tag” parameters in our API documentation.
    • Improved the description of the method “executeAction” in the Metadata SDK documentation.
    • Added API methods for /api/downloads to the API documentation.
    • Added a missing parameter to the API documentation for /api/setupCloudSystem and /api/setupLocalSystem.
    • Fixed incorrect syntax in testcamera command help text.

In-Client Upgrade:

Build Number: 30707
Password: x56cny

Download Links:

 LINUX
 WINDOWS
 ARM
 SDK
 MACOS

4.0.0.30617 Video Management System
PUBLISHED 12 Mar 2020

Release Notes:

  • IMPORTANT
    • UBUNTU 14.04 SUPPORT: Ubuntu 14.04 is no longer supported due to official end of life in April 2019. Please upgrade to Ubuntu 16 or later before updating to this version to avoid issues!
    • 32-BIT SUPPORT: 32 Bit operating system (both Windows and Ubuntu Linux) installation packages are no longer supported. If you have a system with any 32-bit server, the upgrade will not work.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Supported Devices:
      • Axis P1377, P1378, P3719, M1137, M3115, M3116, M3205, M3206, M1134, Q6074
    • New Supported Encoders added to Analog List:
      • RVI R16LA, 1HDR16K
      • Hikvision DS-8116, DS-7204
      • Dahua X51A2, DH-NVR616
      • Amcrest NV4108-HS
      • Uniview NVR301
      • LTS LTD8316K
      • TVI ST-HDVR-161
      • Indigovision BX100
      • Panasonic WJ-GXE100
      • Space Technology ST_HDVR162PRO-D-V2.
    • New Multi-Sensor Camera Support:
      • AV20CPD-118
      • Dahua IPC-HDBW4231F-E2-M12.
    • Advanced PTZ Support for:
      • Hikvision DS-2DE4225IW, DS-2DE4A*25IW
    • Server assigned identical camera IDs for different onboard USB cameras from laptops with the same model and manufacturer. Fixed.
    • (introduced in 4.0.0.30360) The workaround for the Dahua firmware bug introduced in build 30360 caused some DVR PTZ issues. Fixed.
    • Server triggered false signal output on Hikvision DS-2TD2636-10. Fixed.
    • Fixed audio support for ACTi A71.
    • (introduced in 4.0.0.30434): Fixed network issues with Arecont Vision and ACTI cameras.
  • IMPROVEMENTS
    • Added a Time Zone setting for Virtual Camera in Desktop Client.
    • Modified the installation and starting scripts for nx1 to move the core dump files from the root partition to free up some space.
    • Improved MacOS performance and introduced an experimental setting to limit frame rate and reduce CPU load (see Local Settings -> Advanced).
    • Improved cloud connectivity on certain network environments.
  • BUG FIXES
    • Fixed a playback bug which occurred after a zoom window was repeatedly opened and closed several times.
  • API CHANGES/FIXES
    • Added the “accurate_seek” url parameter for HTTP Streaming to avoid time difference.
    • The ec2/analyticsLookupObjectTracks request hung at certain environments. Fixed.
    • Fixed a possible memory leak when using HTTP Streaming API methods.
    • API documentation improved.
  • HANWHA DEVICES SUPPORT/IMPROVEMENTS/FIXES
    • If the ”Backup” media type was used for export from Hanwha NVRs, export from Hanwha SRN-4000 did not work. Fixed.

In-Client Upgrade:

Build Number: 30617
Password: l2jy93

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.30434 Video Management System
PUBLISHED 11 Feb 2020

Release Notes:

  • This is a cumulative patch which incorporates all previously released 4.0 patches.
  • ATTENTION! Users running private patches may experience an issue preventing in-client updates. In such cases it will be necessary to upgrade manually. See “https://support.networkoptix.com/hc/en-us/articles/360042799194” for details.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New Supported Devices:
      • Entropix DSC-TVC-0200,
      • Dahua DH-PSD81602P-A360
      • Vitek VTC-TNB8X4MS
    • Encoders added to the analog list:
      • Axis P7304, M7104
      • Dahua DH-NVR4832-16P-4k, IPC-HUM8431-e1, DHI-NVR608-32-4KS2, DH-XVR5116HE-X, DHI-NVR5816-4KS2
      • Hikvision DS-7208HQHI-SH, DS-7204HUHI-K1
      • 3R Global IPM32R16P, XPM08, XPM16, IPM32R32P, ILT08R, IPM32R16P, IPM32R32P
      • Epcom EV1004turbo, S16TURBOX
      • Dallmeier DVE-16
      • Lorex LNR608
      • Digital Watchdog DW-ENHD16,
      • Invidtech UD1B-16,
      • NVR2821-04009B
      • Intelbras HDCVI 1016, MHDX_3116
      • Honeywell HEN162* family
      • Uniview NVR308-32E-B
      • Pelco NET5501
      • Eclipse ESG-NVR8P
      • InVidTech un1a-32×16
    • Multi-Sensor cameras:
      • Dahua PSD8802P-A180
      • Vivotek MA9322*, MS9321-EHV
      • Pelco IMD2007-1ES
      • Avigilon 9C-H4A-3MH-180
      • Panomera S7 76/22
    • Advanced PTZ Support for:
      • Hikvision DS-2DF8836*, DS-2TD4166T-25, DS-2TD4237-25
      • Pelco P2230-ESR, P2230L-ESR, and P2820-ESR
      • Dahua DH-SD22204T-GN and DH-SD49225T-HN
      • GeoVision GV-SD3732-IR, GV-SD2722-IR
      • IPC-B620H-Z
      • DWC-MPTZ830X
    • Fixed input detection from:
      • Tiandy cameras
      • Hikvision DS-2CD2135
      • Vista VK2-4MPXVRDIR28V12M
      • Hunt cameras.
    • DWC-PTZ30X stopped working after upgrading from 3.2 to 4.0. Fixed.
    • Pelco cameras were unstable after upgrading from 3.2. Fixed.
    • AV20CPD-118 uses ONVIF.
    • Axis Q3709* fixed.
    • Malformed packets in secondary streams from Uniview cameras caused Smart Motion Detection failures. Fixed.
    • ’Contract Violation’ messages appeared on Hikvision analytics events. Fixed.
    • Analytics enabled for IPC-HDW4433*
    • Hikvision analytics events (Line crossing, Intrusion) were triggered only once. Fixed.
    • Dahua N25BB5Z fixed.
  • IMPROVEMENTS
    • The overall stability of the Server and Desktop Client has been improved.
  • BUG FIXES
    • Server Web Admin stopped working in Chrome 80. Fixed.
    • In-client help menu for Camera Settings and Server Settings dialogs failed to work. Fixed.
    • After upgrading to v4.0 “Min days” retention rules could not be set to more than 30 days. Fixed.
    • If there were zoom windows on a camera, the “Set to Fullscreen” action always applied to a zoom window instead of the main camera. Fixed.
    • Video Wall could hang in fullscreen mode. Fixed.
    • Using the CLI to start the Desktop Client and display a specific layout didn’t work if the layout name contained certain symbols (i.e. Japanese strokes). Fixed.
    • Cloud accounts couldn’t be saved in the ”Edit tile” dialog. Fixed
    • On certain ARM devices (Socionext) Hardware ID was calculated incorrectly causing random server issues. Fixed.
    • Video Wall mode was affected by the ”Limit session duration” option in the Desktop Client, as a result, it limited Video Wall sessions. Fixed.
  • API CHANGES/FIXES
    • Video archive downloaded using /media/cameraid.mpegts method with a transcoding enforced could not be played back. Fixed.
    • Updated description for api/storageStatus method.
    • Fixed the memory leak that occured when using an API method to get the MPEG-TS stream with a transcoding enforced.
    • Sample Analytics Plugin is included in the Metadata SDK.
    • api/ptz method documentation is updated.

In-Client Upgrade:

Build Number: 30434
Password: xo5e21

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

4.0.0.30107 Video Management System
PUBLISHED 03 Dec 2019

Release Notes:

  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • New device supported:
      • Vivotek ma9322,
      • Recent Axis camera models
    • Encoders added to the analog list:
      • Hikvision ds-7616ni-sp, ds-7732*
      • Dahua xvr5116, dh/hcvr1604*
      • Axis m7104,
      • Uniview nvr302-16q,
      • NSS nvs-ah04,
      • Eclipse esg-nvr32-8,
      • HiWatch ds-h208u,
      • Digital Watchdog dw-enhd16,
      • RVi rvi-hdr08la-t,
      • Invidtech ud1b-16,
      • Epcom ev1016hdx, ev1016turbo,
      • Allnet all-cam2400-nvr-kit,
      • ActiveCam ac-hr-1116,
      • Panasonic k-nl416k,
      • 3R xst16, xpm4m32, xst08, ipm32r32p.
    • Advanced PTZ Support for:
      • Hikvision 2DE4225W, 2DE5330
    • Some ACTI cameras were not able to be discovered in v4.0, but worked in v3.2. Fixed.
    • ACTI Z model line (i.e. Z31, Z950) was forced to use ONVIF instead of ACTI Native API.
    • Axis C1004E fixed.
  • IMPROVEMENTS
    • Cloud connectivity improved
    • Advanced server settings page on Server Webadmin now contains the list and the description of the advanced server configuration parameters and a basic System Health Report.
    • Database backup period is changed to once per 7 days (30 days total).
  • BUG FIXES
    • If trying to connect a system to Cloud using Server Webadmin it didn’t work if a domain suffix exceeded 6 characters (for instance, info@mail.academy). Fixed.
    • If Default Rotation was changed for a camera after some analytics objects were detected, the thumbnails of those objects were displayed incorrectly on the Right Panel. Fixed.
    • In rare cases multicast streams with H265 codec that had been added manually did not display correctly. Fixed.
    • Fixed Desktop Client UI glitches on Mac OS X.
    • Multicast streams with audio track that had been added manually did not playback correctly in some cases (no audio was played back). Fixed.
    • Desktop Client on Mac OS X could freeze after multiple transitions to fullscreen mode. Fixed.
    • If User Settings and System Administration dialogs were opened in Desktop Client on Mac OS X, User Settings was displayed behind System Administration. Fixed.
    • Sometimes previews of the motion events on the right panel displayed with incorrect aspect ratio in Desktop Client on Mac OS X. Fixed.
    • Under complex LDAP configuration conditions Nx Server could fetch less users than expected. Fixed.
    • If viewing archive from a camera and switch to another layout and back, the playback position switched to live. Fixed.
    • Virtual camera was played back incorrectly on Android client. Fixed.
    • Client could sometimes crash if ”Connect to Server” dialog or webpage on Scene was closed. Fixed.
    • Fixed client glitches with Intel HD 620 and 630.
    • Overall server stability improved.
    • Some RTSP links didn’t work if added manually, but worked in VLC. Fixed.
    • ”Native” onvif ptz presets didn’t work if the preset name in VMS contained some native symbols (like Japanese or Chinese strokes). Fixed.
    • In rare environments under certain circumstances, the motion detection database may have been corrupted after upgrading to 4.0 which prevented the smart search feature from working correctly. Fixed.
    • Stream profiles assignment fixed for Entropix camera.
  • API CHANGES/FIXES
    • When trying to request video streams through API (using any /media/ call), the maxWebMTranscoders parameter limited the sessions to 2 even if the transcoding was not involved. Now the number of the non-transcoded streams that can be requested through API is unlimited and transcoded-ones are limited to maxWebMTranscoders (2 by default).
    • /api/gettime is now deprecated.
    • /ec2/cameraThumbnail: Fix incorrect params description: change `roundMethod` to `method`.
    • /ec2/saveCameraUserAttributesList and /ec2/saveCameraUserAttributes: Mark licenseUsed as unused.

In-Client Upgrade:

Build Number: 30107
Password: 9ayfj6

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM
 SDK

3.2.0.29657 Video Management System
PUBLISHED 30 Aug 2019

Release Notes:

  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Hikvision — vi-m-4-1000, ltd|ds-7616*, ds-7116hgh-f1/n/-af-dvr–a/16-1, ds-7216*, ds-7108, ds-7204hghi-f1/n, ds-8632ni-st, ds-7208hghi-sh, ds-7716ni-*, ds-7332hghi-sh, ds-7204.
      • Dahua — Ipc-hdbw13a0e, x52a3a, dh-xvr4108hs-x, dh-xvr5108hs-x, dhi-nvr4416-16p-4ks2, dhi-nvr5232-8p-4ks2, dh-xvr7216a-4kl-x, x21a3e.
      • eLine — eli-sip-eb21-4r.
      • Zynek — zkd408a, zkd608a, zkd408b.
      • Eneo — mam-6me1012mta.
      • Syscom — ev1016turbox.
      • Costar — crt1200en.
      • Swann — dvr16-4500.
      • Flir — dnr708.
      • HQvision — hq-thd0802a-h.
      • RVi — rvi-ipn32/8-pro-4k.
      • Lorex — lnr632, lnr616.
    • Multi-sensor cameras added to the list:
      • Dahua –ipc-pdb4830-b360.
      • Hikvision — ds-2cd6984g0-ihs.
      • Avigilon — 20c-h4a-4mh-360*.
  • BUG FIXES
    • VMS-15377 — Motion detection is fixed for AV4656DN and AV4655DN
    • VMS-15326 — Server does not show video for channels with colon sign in password.
    • VMS-14792 — Motion detection fix for AV20CPD-118.
    • VMS-15067 — The lens order of Arecont’s AV4656DN (Duo) is fixed.
  • IMPROVEMENTS
    • Fixed server crashes in certain situations.
    • Updated translations.
    • Added flags on Finland, Norway and Sweden.
    • Improved motion detection on Arecont’s AV4656DN and AV08CPD-118.
    • Improved display of the Arecont’s AV4656DN (Duo).

In-Client Upgrade:

Build Number: 29657
Password: 5l4cmg

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM

3.2.0.29463 Video Management System
PUBLISHED 02 Aug 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Hikvision DS-7216hqhi, DS-7204hqhi-f, DS-6716huhi-k, DS-7216hqhi-f2, DS-7716ni-i4, DS-7616ni-i2, DS-7332hghi-sh, DS–7116hgh-f1, DS-7216hui-k2, DS-7108hghi-f1,
      • Dahua DH-XVR encoder line
      • Dahua IPC-PDB4830-b360, IPC-hdbw13a0e, DHI-NVR5832-16p-4ks2, DH-NVR4232-4k, DH-NVR4216-8p-4k, DHI-NVR52a16-16p-4ks2, X52a3a, DH-xvr5108hs-x, DH-xvr4108hs-x, DHI-nvr4416-16p-4ks2
      • Visualint VI-m-4-1000
      • Hunt Electronics HAR324-16
      • Zynek zkd408a, zkd608a, zkd408b
      • ENEO MAM-6me1012mta,
      • Epcom EV1016turbox
      • Costar CRT1200en
      • Swann DVR16-4500
    • Multi-sensor cameras added to the list:
      • Hikvision SHS-2215IZ
    • Arecont AV20975, AV12975, AV12976
    • VMS-14780: stream parameters could not be changed and 2-way audio did not work on Axis cameras with firmware 9.x. Fixed.
    • Hikvision NVR DS-7716NI-K4 could not be added. Fixed
    • When manually adding DWC-PVX16W multisensor camera it will displayed like multi-sensor node with 3 channels and 1 independent one. More fixes.
  • ”onvif|ltn8716k-ht”,
    • eLine ELI-sip-eb21-4r
  • BUG FIXES
    • Fixed database migration issue during server upgrade (reproduced on specific configurations only).
    • Memory leaks on server fixed.
    • Fixed input port number for DWC-PVF9M2TIR.
    • HLS live stream did not display in Microsoft Edge. Fixed.
  • IMPROVEMENTS
    • Added Swedish and Finnish
    • API: ”analytics” periodsType is now listed in ec2/recordedTimePeriods documentation.
  • NEW SUPPORT ARTICLES
    • What is Cloud Connect? – https://networkoptix.zendesk.com/hc/en-us/articles/360026419393
    • Known Issue: Hikvision LPR Analytics stopped working in Nx Witness v3.2 – https://networkoptix.zendesk.com/hc/en-us/articles/360033883693
    • ARM SBC installation instructions – https://networkoptix.zendesk.com/hc/en-us/articles/360033842053
    • Antivirus Configuration: Exclusions/Exceptions – https://networkoptix.zendesk.com/hc/en-us/articles/360025059093

In-Client Upgrade:

Build Number: 29463
Password: hncvse

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM

3.2.0.29287 Video Management System
PUBLISHED 05 Jul 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • LTS LTN8716K-HT
      • Visualint VI-M-4-1000
      • Hikvision DS-7204hqhi, DS-6716huhi, DS-7216hqhi
      • Dahua DHI-NVR5832, DH-NVR4232, DH-NVR4216, DHI-NVR52a16
      • HAR324-16.
    • When taking screenshot from a 2-sensors AV camera only 1 sensor was displayed. Fixed.
    • When manually adding DWC-PVX16W multisensor camera it will displayed like multi-sensor node with 3 channels and 1 independent one. Fixed.
  • BUG FIXES
    • ”Open in New Window” button did not work starting patch 3.2.028676. Fixed.
    • Client displayed only 10 seconds of archive when invoked from within Paxton plugin. Fixed.

In-Client Upgrade:

Build Number: 29287
Password: twrbkl

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM

3.2.0.29151 Video Management System
PUBLISHED 11 Jun 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • AXISP1375, AXISQ6215, AXISM4206, AXISA8207 supported.
    • OpenEye c7413-awr supported.
    • Advanced PTZ support added for:
      • UniView IPC6322SR−X22P−C
      • IPC_HCMN2108
      • Dahua DH-SD49225T-HN.
    • Encoders added to the analog list:
      • Hikvision: DS-6708HQHI-SATA, DS-7116hqhi-k1, DS-7208hthi-k2
      • HiWatch: DS-h116g
      • Dahua: DH-xvr5116he-x, DH-xvr7108e-4kl-b-x, DH-xvr5108hs-4kl-x, DH-xvr5108hs-x, DHI-nvr4432-4ks2, DH-xvr7104
      • ACTi V24
      • Vista VIPER-HDA encoders
      • Sharp YC-r0814.
    • Multi-sensor cameras added to the list:
      • Dahua: IPC-hdbw4233x, IPC-hdbw7233x
      • Hikvision: DS-2cd6d24fwd
      • FLIR: DH-390.
    • VIVOTEK MA9321-EHTV only worked with H265 codec, but didn’t work with H264. Fixed.
    • ”Do not archive primary stream” checkbox did not work for LILIN cameras. Fixed.
  • IMPROVEMENTS
    • Add client configuration parameters to control the default behavior of the ”Info” button. See https://networkoptix.zendesk.com/knowledge/articles/360024662753/en-us?brand_id=1386126.
  • BUG FIXES
    • Sometimes cameras added as RTSP streams froze. Fixed.
    • Sometimes old archive become unmanaged by Server and not accessible. Fixed.
    • Fixed issues with synchronization with the internal archive of Lilin cameras.
    • For some cameras RTP Transport was set incorrectly (UDP instead of Auto) which resulted in RTP packet losses (introduced in patch 3.2.0.28959). Fixed.

In-Client Upgrade:

Build Number: 29151
Password: 1io9xi

Download Links:

 LINUX
 WINDOWS
 MACOS
 ARM

3.2.0.28749 Video Management System
PUBLISHED 29 Mar 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Encoders added to the analog list:
      • Dahua: hcvr5104h-s2, dh-xvr5104c-x1, dhi-nvr5432-16p-4ks2e, n52b3p
      • Hikvision: ds-7208hqhi-k2+, ds-8116hghi, ds-9016huhi
      • Novicam tr2116a
      • Vicon vlr-enc-16
      • Uniview nvr308-32r-b
    • DW-ENHD16 did not recognize alarm on input. Fixed.
    • Fixed input on K20IC (Hikvision DS-2DF8223 OEM).
    • Hikvision DS-2CD2955FWD-IS failed to stream if audio was enabled and codec was set to g711u. Fixed.
  • BUG FIXES
    • When logging in as ”Live Viewer”, opening several cameras and pressing Space, “Not enough licenses” message appeared. Fixed.
    • Client sometimes frozen when opening/closing multiple RTSP streams. Fixed.
    • Incorrect Japanese Translation. Fixed.

In-Client Upgrade:

Build Number: 28749
Password: tqn45u

Download Links:

 ARM
 LINUX
 MACOS
 WINDOWS

3.2.0.28676 Video Management System
PUBLISHED 15 Mar 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • AXISD201-S, AXISQ3527, AXISP9106 supported.
    • Multi-sensor cameras added to the list:
      • Dahua PSD81602-A360, IPC-HDBW4231F-E2-M
      • AXIS P3707, P3709, P3717.
    • Advanced PTZ support added for:
      • Dahua PDN6CT230.
    • Encoders added to the analog list:
      • Hikvision: ds-6701hfi, d, ds-9804hdt-f1, ds-7732ni-i4, ds-7708ni,
      • Dahua: dh-xvr5232an-x, x24a5l, ipc-hum8231-e1, dhi-nvr4216-4ks2, dhi-ivss7024dr-8t,
      • Axis: Q7424RMKII,
      • Uniview: nvr302-08s-p8, nvr201-04u,
      • Digital Watchdog: DW-ENHD16x,
      • RVI: rvi-hdr16lb-m_v.2.
    • Rule “Generic Event – output trigger” sometimes stopped working on ADAM I/O Modules. Fixed.
    • Some channels from Hikvision encoders failed to display. Fixed.
  • IMPROVEMENTS
    • Cloud connectivity (firewalls and proxy servers) improved.
    • Server was sending requests to manually added cameras/streams even when the auto-discovery option was disabled. Now it keeps sending requests only if Failover is enabled.
    • Server stability improved.
  • BUG FIXES
    • Server crashed intermittently when importing a large number of users (more than 6000). Fixed.
    • Fullscreen mode for a camera didn’t work in web client running in Chrome. Fixed.
    • Footage from ”deleted cameras” was not accessible after rebuilding the Archive Index on a new Server. Fixed.

In-Client Upgrade:

Build Number: 28676
Password: 9fb21t

Download Links:

 ARM
 LINUX
 MACOS
 WINDOWS

3.2.0.28563 Video Management System
PUBLISHED 21 Feb 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • Missing archive chunks from Hanwha NVR in case of ”Cont+Evnt” recording type. Fixed.
    • EVO-180WxD was discovered with identical URLs for primary and secondary streams. Fixed.
    • Multi-sensor cameras added to the list:
      • Avigilon 32c-h4a-4mh-360
      • Dahua PSD81602-A360, IPC-HDBW4231F-E2-M
    • Advanced PTZ support added for:
      • UNIVIEW|IPC6322SR-X22
      • Dahua SD5022*
    • Encoders added to the analog list:
      • Hikvision: DS-8616n-st, DSs-7204hqhi-f1/n, DS-7104hqhi-f1/n
      • Dahua: DH-NVR 5832-16p-4k, DH-NVR 7464, DH-XVR 4116hs-s2, DHI-NVR 4208-8p-4k, DHI-NVR 4104hs-p-4ks2
      • Uniview NVR301-08-p8
      • LTS ltn8708k-p8
      • Axis P7224
      • RVI-HDR16lb-ta
    • AAC audio playback from archive did not work on SONY SNC-VM 600. Fixed.
  • IMPROVEMENTS
    • Introduced Portuguese and Brazilian-Portuguese language support.
    • Added advanced setting for LDAP timeout.
    • Cloud connectivity improved.
  • BUG FIXES
    • Daily archive reindexing on Server could result in high load on large storage (>40Tb) and inability to write archive data once a day for 5-15 minutes. Fixed.
    • In a multi-server environment the Desktop client fetched LDAP data randomly from any Server in the System which could result in timeout issues. Now the Desktop client uses the currently connected Server to fetch LDAP data.

In-Client Upgrade:

Build Number: 28563
Password: h921ez

Download Links:

 ARM
 LINUX
 MACOS
 WINDOWS

3.2.0.28340 Video Management System
PUBLISHED 14 Jan 2019

Release Notes:

  • This is a cumulative patch which incorporates all previously released 3.2 patches.
  • ATTENTION!!!
    • The Nx1 lite client has been removed for stability reasons. Do not upgrade if still required.
  • NEW DEVICE SUPPORT/IMPROVEMENTS/FIXES
    • DWC-PVX16W – sensors now display separately (no longer stitched)
    • AV20CMB-100 and AV05CID now supported
    • Advanced PTZ support added for:
      • Hikvision DS-2DF8836IV-AEL and DS-2DE4A320IW-DE
      • Dahua PDN6CT230HN
    • Smart Search is now supported on ARM platforms for H.265 codec streams
    • The following cameras were added to Multi-sensor list:
      • Dahua IPC-PDBW5831P-B360,
      • Geovision GV-SV48000
      • AXIS P3717
    • Server reported RTP errors on UNIVIEW IPC542E-DLC-C when no error existed. Fixed
    • The following in-camera analytics options were hidden for DW TVT VA cameras:
      • cross line people counting
      • crowd density
      • intruding people detection
      • object status changed
      • ’Video Cast detection’ also renamed to ‘Abnormal color detection’.
  • BUG FIXES
    • API function “Download archive” allowed downloading only low quality stream even though camera had only one (high quality) stream. Fixed.
    • Incorrect screenshot requested from the video archive on some cameras which support codec changing. Fixed.

In-Client Upgrade:

Build Number: 28340
Password: t7jmft

Wave hårdvara snabbstart

Wave VMS software

Varje Wisenet WAVE-funktion är framtagen för att ge en enkel, men ändå kraftfull, användarupplevelse.
Livet ska vara enkelt, därför har Wisenet Wave endast en programvaruversion där fria uppdateringar av programvaran livet ut ingår.

Mjukvarans maxutbyggnad* är upp till 128 kameror och 50 klienter per server, 50 servrar och obegränsat antal klienter per system. Inspelningslicenser köps per styck eller i paket om 4, 8,16, 24 eller 48 st. Det finns även encoderlicens för 4 analoga kameror till IP, licens för I/O-nätverksenheter, videovägg-licens för en klient med 2 skärmar.  

Wave VMS Recorder med förinstallerad VMS-mjukvara och 4TB hårddisk samt 4 st 30-dagars trial-licenser**.

  • Recorder för upp till 12 kameror och samtidigt klient för 6 kameror @1080/12 fps
  • Recorder för upp till 16 kameror @1080/12 fps (separat klientdator)
  • Stöder majoriteten av alla kameramärken. Se lista http://devices.wavevms.com/
  • Fria uppgraderingar av VMS-mjukvaran
  • Förberedd för fjärrsupport

* Detta ställer krav på hårdvaran. Kontakta oss ADI så hjälper vi er med rätt hårdvara för er lösning.

** För köp av licenser kontakta oss på ADI order.se@adiglobal.com eller beställ i vår e-shop https://www.adiglobal.se/

Snabbstartsguide

  1. Ubuntu startar och Wave fönstret öppnas.
  2. Tryck på ”Create new wave server” och sätt lösenord för administratör.
  3. Om enheten är kopplad till ett nätverk med en router med multicast aktiverat så söker systemet upp kameror i nätverket automatiskt (detta kan ta upp till 5 minuter). Om den automatiska sökningen inte fungerar så kan kamerorna sökas upp manuellt genom att högerklicka på servernamnet till vänster och välja ”add device”, fyll sedan i IP-adress, hostname eller RTSP- ström samt användarnamn och lösenord. Bocka i ”subnetscan” om så önskas.
  4. Om kamerorna inte har fabriksatta inloggningsuppgifter så måste dessa anges under respektive kamera i menyn.
    Högerklicka på önskad kamera och välj ”camera settings”. Under fliken ”General” ändrar du inloggningsuppgifter. Om det är ett hänglås på kamera-ikonen så är den inte inloggad, är det ett kryss så är den offline (ej ansluten).
  5. Dubbelklicka eller ”Dra och släpp” sedan ut de kameror du vill se.
  6. Aktivera licenser gör du genom att högerklicka på husikonen högst upp till vänster, klicka sedan ”system administration” tryck sedan på fliken ”licenses”.
  7. För att aktivera inspelning högerklicka på kameran du vill spela in på , välj ”Camera settings” , välj flik ”Recording”. Tryck på aktiveringsknapp på övre vänstra sidan. Välj sedan vilket schema du önskar t ex rött för inspelning vid rörelse, välj ”All” eller de datum och tider du önskar samt FPS (bilder per sekund). Vill du ha ”Pre och Post”-inspelning, eller om du vill ange antal dagar inspelning ska ske, så görs detta även i denna meny.
  8. Ställ in känsligheten på rörelser på fliken ”Motion” i samma fönster. 5 är satt från början, välj känslighetsruta efter behov.
  9. För att koppla systemet till molntjänsten för internetåtkomst för din mobil eller remoteklient: högerklicka på husikonen uppe till vänster, välj ”system administration” därefter fliken ”Wave sync” klicka sedan på ”Create wave sync account”
  10. – en hemsida öppnas då upp. Fyll i förnamn, efternamn, e-post, lösenord, bocka i och godkänn avtalet, tryck på knappen ”Create account” och stäng webbfönstret. En aktiveringslänk skickas till din e-post , tryck på

Activate Account i “Activate your account” mejlet.

  1. Högerklicka sedan på husikonen uppe till vänster i Wave, välj ”system administration” tryck på fliken”Wave sync” tryck på ”Connect system to wave sync” och fyll i angiven e-post adress samt lösenord, klicka i ”stay logged in”-rutan och tryck OK. Systemet bekräftar att du är kopplad till ditt Wave synckonto.
  2. Ladda hem appen ”Wisenet wave” , tryck sedan på ”Log in to wave sync” och logga in med de uppgifter du angivit ovan.

 Enkelt

  • Drag och släpp-interface
  • Flexibel layout och kartfunktion
  • ONVIF- Auto sök
  • Skalbar – väx i din egen takt
  • Smart sök
  • Fisheye de-warping i klient och mobilapp
  • Wave-klient, mobilapp (Android, iPhone), webb-interface
  • Webbläsarstöd: Google Chrome, Mozilla Firefox, Opera/Opera Neon, Microsoft Edge, Apple Safari

Tryggt

  • Fria uppdateringar =framtidsäker
  • Failover
  • Audit trail – Vem, vad, när
  • Statusrapport

Anpassningsbart

  • Flexibel händelse & regelmotor
  • Stöd för i-kamera analys
  • Tvåvägs-ljud
  • API för integrering med andra plattformar
  • Single sign-on LDAP/Active Directory
  • 128 kameror och 50 klienter per server, 50 servrar och obegränsat antal klienter per system
  • Support för I/O enheter
  • OS stöd: Microsoft Windows*, Ubuntu Linux*, Apple macOS

* Både server och klient

Vilka kameror stödjer Wisenet Wave

Supported IP Video Devices

338 manufacturers 5414 devices

WAVE compatible devices

Hur är Wisenet artikelnummer uppbyggt?

Hur ansluter jag WISENET DDNS?

DDNS registration

https://ddns.hanwha-security.com/

Translate »
error: Innehållet är skyddat !!